To some extent, Yes. But can't completely eradicate the issue, cause all we are doing is just adjusting the preload compression. And a wrong setting would throw the rear off the ground, we have to be careful with that.
Ur channel should grow more soon..really nice contents... you know I was about to change my headlight set up on duke 250 bs4 but after watching your video where it says it's not possible I changed my mind but if u think are any little hopes where you and me can get that halogen headlamps changed with the LED headlamp unit
Good question. Most times there is no such issue even with gloves. But I would recommend a one with slightly lengthier bar ends to resolve that. Currently only official accesories of KTM and Triumph has that.. I have given a order to triumph like 4 months back, still part hasn't arrived. Will try to do a review post that.. 👍
I was doubting the same before using it. But nothing significant enough to find any difference. And also duke's handlebar doesn't really vibrate because of its rake and trail angle.
Bhai...mere pass apache rtr 160 4v...m usme side mirror lagana chahta hu. Lekin bar ends ko bhi hatana nai chahta... Kaise laga skte hain dono ko el sath??
Not sure. Need to see the vehicle to decide if it can be done. But this bar end mirror set also has weights in it unlike other ones, so even if you remove the existing you'll still have some bar end weights to it.
Lol I was also planning to install these....but trust me they're worst in rainy season.....you won't get a shit idea about what's coming from behind lol.... specially in ghat section....lol
That's some good options you have, but people have different riding styles within city. Some like to do enthusiastic city rides, some like to be relaxed and have a plush ride throughout. If you are the first category, forget all other brands, pick Duke 200/250 and you won't regret one bit, If you are second, take Yamaha FZ25. Also consider Apache RTR 200 4v (this has more features) if possible. I have test driven it, it's a brilliant city bike. If you have a good tvs dealer nearby, get that. Else if you need a fun bike, but tight on budget, and can settle for something which is not premium, then take Gixxer 250 without doubt. Because apart from being heavy, I really liked that Gixxer. Hope it helped. 😊 Please do like, share and subscribe, so you get to see more awesome automobile content.. 😊 safe ride
Good question. From what I enquired to a traffic police constable an year back, as far mirrors are considered, it's only illegal if they are not there in your bike. And mirrors are part of mandatory accesories list like your side stand, number plate holder, saree and mud guards as per indian motor law, and as you know these are installed by default in all bikes which comes out of the showroom but are of different designs. So from what I know, you don't need to worry about the placement or design of the accessory but only make sure that it's present. Hope it helped 😊 Do subscribe if you like our content 😊
When you use the clutch..does they hit the bar end mirrors. Cause i own a mt 15 and i bought bar end mirror ( not this one)..and my clutch s end was discolored by hitting it ...should i get these for my yamaha MT 15 ?
It's perfectly fine if you are a single rider for most of the time, it only becomes a problem when you have pillion and bad roads.. I'm making a seperate video on the negatives of this bike soon, so kindly subscribe to stay tuned 😊
Bro i have a slight problem. I own a Vitpilen 250, i can easily fit the left side bar end mirror but i when i fit the throttle side, it sometimes jams and doesn't spring back when you rev and release. Got any solution to this problem? Should i get like a longer screw or am i missing something?
Not sure how to describe it. I will be talking about it in this video and will also purchase one. Take a look: th-cam.com/video/QRkCDLX59co/w-d-xo.html
You will need to make a cut at the end of your handlebar to the size of a coin to install barends, as Duke 200's doesn't have a hole to install the same..
1. There is no space to put my hand in the handlebar if I wear gloves. 2. Has a drag, and affects in high speeds. 3. More over like I said in the video, it's a personal choice and betal shaped ones look at its best when placed upside down.
I thought they would do the job if placed over but yeah gloves argument is acceptable. It might create the problem. I like the ones on street triple RS. They just seem fine.
It would be better both ways if the clamp is any longer and the mirrors are any bigger. The problem is that these replicas don't have that. 😒 I checked with ktm and triumph, they don't have the stock in my area. So when that's available, ill do a review of it. 👍
Each and every time you have to take your eyes off the road and move your head down to see mirror and finally you may end up with tragedy. And it is also capable of pulling thread like things along with the bike like any rope, salwars hanging out of the nearby vehicles, At high speeds even a second is a matter of life. Trust me these mirrors are just for appearance, they are dangerous and totally useless.
Exactly, not just that, I can barely see a thing, my arms would be blocking most of the view in the mirror. Totally not recommended, especially in India.
You might have to cut the handlebar end to the size of a coin and do this installation, as from what I remember the bs6 duke 200 still has the handlebar from the old version.
Ek dam waste mirrors...would suggest not to buy.. Area of view not at all good.(zyada kuch dikta nai hai) Light reflect hoke directly eyes ke paas ati hai..so it feels flashy Very much delicate..as it's made of aluminium.. mine got broke in 2 days(kyun ki maine adjusters to zyada tight kardia toh bar toot gaya) Not worth spending
please make a video on mods which are legal and illegal..like exhaust, stickering and more..i know a bit, but i need to know about it more. and will ktm provide this bar end mirrors?
Sure will try to make one. Yeah KTM has a barend mirror as a powerpart, but you have to import it. It should cost you like 10-13k in india after taxes. You can also try the triumph ones if you want, but they are even more costly like a set costs 19k. So the choice is yours.
Ah.. I see.. Yours doesn't have a socket for this barend.. what you can do is, cut out the rubber in your handlebar end to the size of a coin, and get a 7/8" barend mirror set, to fix it there.. hope it helped! 😊
Bike is yet to go for 1st service. Will post a video on that once it's done. Do subscribe to get notified 😊 For now, with mixed city and highway ride, I'm getting from 31.5 to 34.5km/l
30 is a decent number. Actually it depends on how you ride. So far, as it's a new bike I have not rev'd it more than 5.5k in any gear. Additionally mileage is affected by many others factors as well, like tyre pressure, load on bike, road elevations, throttle handling etc.,
Yes. But again I maintain a strict rule to not push the vehicle beyond 5000rpm in any gear(till 1st service) and have optimum tyre pressure based on load. So it depends on the rider.
![[LIVE] : ONE ลุมพินี 82 วันนี้!! คู่เอก | ยอดไอคิว vs อับดัลลาห์](http://i.ytimg.com/vi/hSsyTl_9bqs/mqdefault.jpg)
That's a pretty informative video !
Good luck with this channel buddy.
🌸
Awesome job there .
Thanks ya 😊
U shld have showed the look of the bike after new mirror installation
Yeah. That was sorely missed! 😬 Next time!
1.6 k subscribers don't suit on your channel man❤️
PURE CONTENT
Thanks brother! ❤️ Share more, let's grow together 😊
Bro u can adjust the rear suspension to avoid ground clearance issue...i hope it works
To some extent, Yes. But can't completely eradicate the issue, cause all we are doing is just adjusting the preload compression. And a wrong setting would throw the rear off the ground, we have to be careful with that.
Okay bro..
Thanks was going to buy these for my Husqvarna, looking at your video, it appears that it might have been a bad decision!
Glad it helped! 👍
Perfect tutorial and video. Thanks man!
Ur channel should grow more soon..really nice contents... you know I was about to change my headlight set up on duke 250 bs4 but after watching your video where it says it's not possible I changed my mind but if u think are any little hopes where you and me can get that halogen headlamps changed with the LED headlamp unit
Thanks for your kind words 😊🙏 do share the videos with your friends to spread the good word 😊
Is duke 200 bs6 and duke 250 bs6 handle bar exactly same or minor difference???
Is it able to see from rider's vision, coz our hand's is on handle so is it any obstacles to see behind object in mirror...?
Good question. Most times there is no such issue even with gloves. But I would recommend a one with slightly lengthier bar ends to resolve that. Currently only official accesories of KTM and Triumph has that.. I have given a order to triumph like 4 months back, still part hasn't arrived. Will try to do a review post that.. 👍
After removing the bar end weights then using bar end mirrors , does handle gives any vibrations ??
Mostly not, cause the mirror and the holder balances the weight
dude...do u feel any vibrations.... because u have removed the bar-end weights....
I was doubting the same before using it. But nothing significant enough to find any difference. And also duke's handlebar doesn't really vibrate because of its rake and trail angle.
Can I see clear road on the right side mirror because I think your hand would be obstacle ...
I thought the same during the installation, but luckily that was not much of a problem. I could see whatever the mirror had to offer
Iam also from hyderabad. I own a DUKE 250 Bs6 grey one bought it on the month of may. If u want we can have some short rides.
Always love to meet another rider 😊
Didium :- Were do u stay?? I stay at kukatpally forum mall.
It looks epic on RC 390 as well
Bhai...mere pass apache rtr 160 4v...m usme side mirror lagana chahta hu. Lekin bar ends ko bhi hatana nai chahta... Kaise laga skte hain dono ko el sath??
Not sure. Need to see the vehicle to decide if it can be done. But this bar end mirror set also has weights in it unlike other ones, so even if you remove the existing you'll still have some bar end weights to it.
@@Didium ok..thanks bro
Awesome content dude..keep going..
Umm I have a Yamaha FZ V2 will it fit on it ?
Thanks bud! For V2 FZ you might have to cut the rubber of the size of a coin and fix it.
@@Didium will it look good and professional bro ?
My take is that bar ends suit street naked bikes at best than super sports or adventure bikes, so it should be good in fz.
@@Didium thanks for advice bro....lots of love keep growing ✨
Keep sharing the videos, it would be really helpful 😊 thanks
Lol I was also planning to install these....but trust me they're worst in rainy season.....you won't get a shit idea about what's coming from behind lol.... specially in ghat section....lol
true that!
Bro, can I use this bar mirrors in my Yamaha fz25
Not really sure. Does it have a bar end weight in it already
@@Didium yes bro it comes like duke 250 bar end .
Then you should be able to, cause these barend mirrors are universal
Hello bro I have confused between KTM duke 250 vs gixxer 250 vs yamaha fz25 which bike I choose?
my use mostly in city use
That's some good options you have, but people have different riding styles within city. Some like to do enthusiastic city rides, some like to be relaxed and have a plush ride throughout.
If you are the first category, forget all other brands, pick Duke 200/250 and you won't regret one bit,
If you are second, take Yamaha FZ25. Also consider Apache RTR 200 4v (this has more features) if possible. I have test driven it, it's a brilliant city bike. If you have a good tvs dealer nearby, get that.
Else if you need a fun bike, but tight on budget, and can settle for something which is not premium, then take Gixxer 250 without doubt. Because apart from being heavy, I really liked that Gixxer.
Hope it helped. 😊 Please do like, share and subscribe, so you get to see more awesome automobile content.. 😊 safe ride
Add the husqies and domi 250 to your confusion too ! That should help make you a decision!
Didium I have no budget issues bro but personally I like ktm duke 250 bike because of looks so
Go for it brother 👍😊 all the best and safe ride! 🏍️
Is the bar end mirrors are legal in all states in india ?????please give a correct answer bro♥️♥️♥️
If u know bro plzz share it
Good question. From what I enquired to a traffic police constable an year back, as far mirrors are considered, it's only illegal if they are not there in your bike. And mirrors are part of mandatory accesories list like your side stand, number plate holder, saree and mud guards as per indian motor law, and as you know these are installed by default in all bikes which comes out of the showroom but are of different designs. So from what I know, you don't need to worry about the placement or design of the accessory but only make sure that it's present. Hope it helped 😊 Do subscribe if you like our content 😊
Thank u bro♥️♥️♥️.....keeping going with newly vedios ..
Legal or not who cares..lol..
Bro i purchased tvs apache rtr 160 4v recently. Can you suggest me bar end mirrors for it?
Brother do u have any issues when putting first gear in 250
I'm sorry to ask a off topic option 🙏
Bro where did you buy your glasses from?
That's quite an off topic😁 it's from Lenskart
Can't we attach both the bar end mirror and the hand guards?
Unless you make a customized one, No
Nice video bro ❤️
Thanks buddy 😊
What about ktm duke 200 they dont have bar ends. How can we install there?
Yeah. But if it has the holes to fit one, then you should be able to. I think it has..
Just about to ask the same.. Mine dnt hve the bar end as well.. And no hole to put on the mirror bar end.. Do I hve to make hole to it?
Can we use this product for duke 200 bs6
Yes you can!
Which bar end mirrors are these please
When you use the clutch..does they hit the bar end mirrors. Cause i own a mt 15 and i bought bar end mirror ( not this one)..and my clutch s end was discolored by hitting it ...should i get these for my yamaha MT 15 ?
not sure about MT15, but it doesn't touch mine
@@Didium thanks...should i get it ?
Try it out. if it doesn't work out, we can always return. Just check if the product has a return option, then you are good to go.
bro please tell me about the ground clearance....im going to buy it
It's perfectly fine if you are a single rider for most of the time, it only becomes a problem when you have pillion and bad roads..
I'm making a seperate video on the negatives of this bike soon, so kindly subscribe to stay tuned 😊
Bro i have a slight problem. I own a Vitpilen 250, i can easily fit the left side bar end mirror but i when i fit the throttle side, it sometimes jams and doesn't spring back when you rev and release. Got any solution to this problem? Should i get like a longer screw or am i missing something?
You will need spacers to resolve this, it creates space for the throttle to rotate freely. Get it from KTM. It's 32rs per piece.
@@Didium Oh is it the small round rubber ones that come with the mirror set?
Not sure how to describe it. I will be talking about it in this video and will also purchase one. Take a look: th-cam.com/video/QRkCDLX59co/w-d-xo.html
Hi bro I like your videos and I have subscribed your channel. Can you please make video on exhaust sound change. Pleaseee
Thank you 🙏 😊
And do you mean replacing the stock to an aftermarket exhaust or a video on stock exhaust sound?
After market 🤩🤩
It’s only for look bro
cool bike
Bro can I install on Duke 200 bs4 plz suggest??
You will need to make a cut at the end of your handlebar to the size of a coin to install barends, as Duke 200's doesn't have a hole to install the same..
@@Didium thanks bruh
Is it legal to use bar end mirrors or not?
Don't you think they should be over the bar(not upside-down)
1. There is no space to put my hand in the handlebar if I wear gloves.
2. Has a drag, and affects in high speeds.
3. More over like I said in the video, it's a personal choice and betal shaped ones look at its best when placed upside down.
I thought they would do the job if placed over but yeah gloves argument is acceptable. It might create the problem. I like the ones on street triple RS. They just seem fine.
It would be better both ways if the clamp is any longer and the mirrors are any bigger. The problem is that these replicas don't have that. 😒 I checked with ktm and triumph, they don't have the stock in my area. So when that's available, ill do a review of it. 👍
@@Didium yeh that'd be better.
Each and every time you have to take your eyes off the road and move your head down to see mirror and finally you may end up with tragedy. And it is also capable of pulling thread like things along with the bike like any rope, salwars hanging out of the nearby vehicles, At high speeds even a second is a matter of life. Trust me these mirrors are just for appearance, they are dangerous and totally useless.
I second that too.. these are purely for cosmetic purposes.
Exactly, not just that, I can barely see a thing, my arms would be blocking most of the view in the mirror. Totally not recommended, especially in India.
Is it possible to get a link to buy that mirror ??
Thanks
Sure. It's in the description, hope it helped.
Can I install on Duke 200 bs6?
You might have to cut the handlebar end to the size of a coin and do this installation, as from what I remember the bs6 duke 200 still has the handlebar from the old version.
You gloves name or link please?
Bhai mirror lagane ke bad kise dikhati hai ye to dikhawo....
Thanks for your suggestion. Will take care next time 😊
Can we put bar end mirror with hand guard
Nope not possible. But there are some lever protectors with mirrors, you can try that.. but it comes in plastic, so I would'nt really prefer..
Didium oh okay ! How much it cost to change black rim to orange by spray can or car paint spray
That im not sure, but I know how much those black alloys cost from KTM.
r they hit ..on tank while taking U turn?
Nope. Neither the tank nor my leg.
ARE these legals in roaDs??
Yup it is legal. The placement doesn't really matter, but the availability does. 👍😊
Bro ground clearance nice bro or any problems
It's decent, not bad as a Kawasaki. But again, it's definitely a problem if you compare it with a bs4 version and it's the same for all bs6 KTMs.
Are these convex?
Bro, which gloves are those??
Aspida ares
@@Didium Thanks.
Ek dam waste mirrors...would suggest not to buy..
Area of view not at all good.(zyada kuch dikta nai hai)
Light reflect hoke directly eyes ke paas ati hai..so it feels flashy
Very much delicate..as it's made of aluminium.. mine got broke in 2 days(kyun ki maine adjusters to zyada tight kardia toh bar toot gaya)
Not worth spending
Yup. It's purely cosmetic and nothing else
bro which location is this??
Hyderabad, outer ring service road
Bhai apache 200 me lag jayga
If your handlebar has bar ends already then you can fit
U have issue with ground clearnace
When compared with bs4, yes. It's only 151mm now.
Bro is legal or illegal
Bro isse warranty void nai hoga?
Nothing to do with warranty 👍
Bro does the mirror touches to knees while taking U-turn?
I don't remember encountering it. So no
Bro send proper link
Is this legal..i mean will cops catch for this mod?
Technically it isn't illegal as long as you have mirrors
please make a video on mods which are legal and illegal..like exhaust, stickering and more..i know a bit, but i need to know about it more.
and will ktm provide this bar end mirrors?
Sure will try to make one. Yeah KTM has a barend mirror as a powerpart, but you have to import it. It should cost you like 10-13k in india after taxes. You can also try the triumph ones if you want, but they are even more costly like a set costs 19k. So the choice is yours.
@@Didium thanks man..so quick response ❤️👍
Hi.. I'm new.. My ktm duke handle grip doesn't have hole.. How do I install it.. Do I hve to make hole to it?
Which Duke do you own?
@@Didium duke 200 version 1
Ah.. I see..
Yours doesn't have a socket for this barend.. what you can do is, cut out the rubber in your handlebar end to the size of a coin, and get a 7/8" barend mirror set, to fix it there.. hope it helped! 😊
@@Didium thnks man.. I try it soon..
Are these legal replacement for the stock ones?
Yeah
Bro what is your milage this time.
Bike is yet to go for 1st service. Will post a video on that once it's done. Do subscribe to get notified 😊
For now, with mixed city and highway ride, I'm getting from 31.5 to 34.5km/l
@@Didium ok bro my duke giving now 30 .it goes 600 km
30 is a decent number.
Actually it depends on how you ride. So far, as it's a new bike I have not rev'd it more than 5.5k in any gear.
Additionally mileage is affected by many others factors as well, like tyre pressure, load on bike, road elevations, throttle handling etc.,
@@Didium thanks
How much mileage are u getting ?
31 to 35km/l, with city and highway riding.
Will do a mileage test after 1st service and post a video of it..
@@Didium so u are getting this figures before the first service
Yes. But again I maintain a strict rule to not push the vehicle beyond 5000rpm in any gear(till 1st service) and have optimum tyre pressure based on load. So it depends on the rider.
You don’t even install them dude .
It doesn't look like 790 but it looks good
Haha I meant the mirrors, not the whole bike 😊