Elmod Fusion Pro + flysky FS-T6 + Taigen tiger 1

Tiger 1 early from taigen metal version 6,7kg (I bought it at rctank.de in 2016), original 4: 1 geabox with high torque FTX Outback 2.0 RC390 motors.
These motors have much more torque than the 390 taigen motors and combined with the elmod fusion pro board with PWM frequency set to 5 kHz they make the 7 kg tank able to overcome any obstacle and steep slopes at very slow speed and be able to do everything type of slow and smooth turns on difficult terrain such as grass or stones.
After many days fine-tuning the elmod configuration and finding the right high-torque motors I have finally achieved the realistic and precise movements that I wanted, the flysky transmitter also helps a lot, which allows very precise control especially using channels 1 and 2 with The left lever remains in the fixed acceleration position, this allows you to set the speed you want and without moving, make precise turns without modifying the speed, achieving all kinds of realistic maneuvers.

[@Browi1970]

Hiho, please tell me, how did you do it to use channel 1 and channel 2 on the left stick?

[@chgaming4k533]

In the transmitter I have configured the "Model 02 Flysky02" mode, which shows an airplane drawn on the screen and in the receiver the orange cable is placed first in ch1 and then the brown cable in ch2, the rest of the colors are as the elmod manual says, I don't remember why I did that, nor do I remember if in the elmod software there was an option to exchange channels. Another option that should work is to swap the brown and orange wires (ch1 and ch2) at the receiver for the yellow and green wires (ch3 and ch4).

[@MOBILBOSINDONESIA]

Brem brem brem.... fight ...