Rex you truly are a class act, and that's why you will be getting my business. I know there are other people that would have been out of line with this.
I race 21 off/on road..British and euro championships...and have modded my own engines with great performance gains since the early 90s.....FYI...The best buggy/car engines on the market are by far OPS.....but no-one knows it, when I get asked which engine to buy I recommend nothing else but OPS. The power of stock OPS engines compared to a modded Rossi or Picco is astounding. Open up a "stock" top of the line OPS and it's a work of art inside. They can be hard to find, I have my own sources, but if you can find...invest while they still make them!
Great review. Hope to hear more about this engines performance once the owner gets it back and runs more fuel through it. Especially what the environment thats its being run in(drag racing, bashing, or speed run). Great job🏎💨💯💪💪👊👊👍👍
Class act by not calling anyone out. As I've mentioned to you before, once this chaos is over, I will definitely be sending something your way for some speed runs.
Great 👍 review! Lol 😂 I know exactly who’s engine that’s from !! What a shame ! I will also not say his name unless people ask me . Your work blows his away NO ?’s I know this for a fact!! Unfortunately there are some termites out there talking nonsense and there viewers see that crap and get suckerd into that BS. Anyways keep up the great 👍 work 🤝 Take care and God bless 🙏
I have 2 Rex Legend 28-8's modded by this person 1 drag mod and 1 race mod and the engine you have there is a drag mod, I can tell by the exhaust port. The one I have that is race mod doesn't have any work done on the exhaust port. I have run in the drag mod engine and it is very impressive and I'm very happy with it. It runs great and is a powerhouse delivering pretty much all the power it has all the time without any delay or hesitation. I have 4 engines I'm considering sending you and I'm waiting to buy a Truggy 28-8 and 28-7 so I can send you those as well for modding. I like the 2 Rex legends I have and just want to get 2 more but modded by you instead of the gentleman who did the engine you have there. I have nothing against him I just feel like you do great and impressive work and you do a couple of things differently than him and offer some extra services that he doesn't so it's a no brainer for me. Also I feel you give and contribute a lot to this hobby and I like supporting good people so deciding to change engine modifier was an easy decision to make. I have the FX K301 & K501 (K301 has been run in and only a couple of tanks through it) also some Team Orion engines one 3 port the other a 7 port. I will be in touch via email once I've been able to order these next 2 engines and will most likely send you 6 engines to modify. I just want to say thank you for all the great information you share with us and the great work that you do and for contributing greatly to our hobby.
I have that engine as a drag mod I know who the moddifiyer is but I wont say it I have his lrp.32 as well and both perform well!! But interesting numbers now that you showed them!
Go to my channel and see i do a review on them ask me the question there and ill answer rw didnt want to mention so dont want to say on his channel out of respect!
Lmao 😂🤣😂🤣! Please don’t say that termites name ! I can’t believe he calls himself that and he never ever seen or owned one before !! He gave that RC a bad name just because he calls himself that ! Biggest jack ass out there !
that guy kills me , the worst is watching him running a Killer modded on road in a buggy with the buggy manifold thus killing all power and rpm then he says ehhhh shes alright lmao.smh @@BOTAJELL
It's a shame you didn't show the sleeve exhaust port height in relation to the crankcase exhaust port height....If the sleeve height was higher than crankcase height then it's pointless and will do nothing at all for performance....A lot of so called tuners/modifiers just play on the naivety of the customer....You know...If it looks different from stock and you can see Dremel work then it must be quicker.....Right????
![🎤 ไปกันต่อออ! จับฉลากร้องเพลง x P’ #XXSIVK [EP.2] (1/2) เพลงของใครจึ้งสุดน้าา 💓🎤 #MXFRUIT](http://i.ytimg.com/vi/mLI_K0sAS4o/mqdefault.jpg)
Rex you truly are a class act, and that's why you will be getting my business. I know there are other people that would have been out of line with this.
I race 21 off/on road..British and euro championships...and have modded my own engines with great performance gains since the early 90s.....FYI...The best buggy/car engines on the market are by far OPS.....but no-one knows it, when I get asked which engine to buy I recommend nothing else but OPS. The power of stock OPS engines compared to a modded Rossi or Picco is astounding. Open up a "stock" top of the line OPS and it's a work of art inside. They can be hard to find, I have my own sources, but if you can find...invest while they still make them!
Great review. Hope to hear more about this engines performance once the owner gets it back and runs more fuel through it. Especially what the environment thats its being run in(drag racing, bashing, or speed run). Great job🏎💨💯💪💪👊👊👍👍
Class act by not calling anyone out. As I've mentioned to you before, once this chaos is over, I will definitely be sending something your way for some speed runs.
Great 👍 review! Lol 😂 I know exactly who’s engine that’s from !! What a shame ! I will also not say his name unless people ask me . Your work blows his away NO ?’s I know this for a fact!! Unfortunately there are some termites out there talking nonsense and there viewers see that crap and get suckerd into that BS. Anyways keep up the great 👍 work 🤝 Take care and God bless 🙏
I used to polish the outside of the sleeve, until I figured out that the looser it fits the quicker you lose your pinch.
I have 2 Rex Legend 28-8's modded by this person 1 drag mod and 1 race mod and the engine you have there is a drag mod, I can tell by the exhaust port.
The one I have that is race mod doesn't have any work done on the exhaust port.
I have run in the drag mod engine and it is very impressive and I'm very happy with it. It runs great and is a powerhouse delivering pretty much all the power it has all the time without any delay or hesitation.
I have 4 engines I'm considering sending you and I'm waiting to buy a Truggy 28-8 and 28-7 so I can send you those as well for modding. I like the 2 Rex legends I have and just want to get 2 more but modded by you instead of the gentleman who did the engine you have there. I have nothing against him I just feel like you do great and impressive work and you do a couple of things differently than him and offer some extra services that he doesn't so it's a no brainer for me.
Also I feel you give and contribute a lot to this hobby and I like supporting good people so deciding to change engine modifier was an easy decision to make. I have the FX K301 & K501 (K301 has been run in and only a couple of tanks through it) also some Team Orion engines one 3 port the other a 7 port. I will be in touch via email once I've been able to order these next 2 engines and will most likely send you 6 engines to modify.
I just want to say thank you for all the great information you share with us and the great work that you do and for contributing greatly to our hobby.
are you selling any of the 28-8?
I have that engine as a drag mod I know who the moddifiyer is but I wont say it I have his lrp.32 as well and both perform well!! But interesting numbers now that you showed them!
Who? So I know not to go there
Go to my channel and see i do a review on them ask me the question there and ill answer rw didnt want to mention so dont want to say on his channel out of respect!
@@deontay79ify let’s just say it’s a termite engine Lmmfao 🤣😂
When i modded my engine i did not polish the sleeve I feel the same way your taking away metal an it wont fit as tight
Is this muggys engine. That he had modded an then sent to another modifier witch is you cus its fits the time line lol but great vid.
Lmao 😂🤣😂🤣! Please don’t say that termites name ! I can’t believe he calls himself that and he never ever seen or owned one before !! He gave that RC a bad name just because he calls himself that ! Biggest jack ass out there !
that guy kills me , the worst is watching him running a Killer modded on road in a buggy with the buggy manifold thus killing all power and rpm then he says ehhhh shes alright lmao.smh @@BOTAJELL
That crank reminds of a reedy vr .21, im rebuilding one right now an the crank looks exactly like that but with black silicone
Some of those Reedy actually have a plastic fill in the crank. There is a small screw holding it in.
@@TheRwmods right on brotha! There pretty sweet engines
👍👍
Well the piston gave the modder away, to me..
I want to know, I just got my modded 28.8 back
Yes I own this engine as well I know the modder
Can an old Nova engine be rebuilt?
It's a shame you didn't show the sleeve exhaust port height in relation to the crankcase exhaust port height....If the sleeve height was higher than crankcase height then it's pointless and will do nothing at all for performance....A lot of so called tuners/modifiers just play on the naivety of the customer....You know...If it looks different from stock and you can see Dremel work then it must be quicker.....Right????
👍🏼👍🏼
what kind of silicone is used to fill the cranks
There are a few different types used in the factory engines. It is just a nitro proof self leveling silicone.
@@TheRwmods what brand would you suggest I have a modded .28 nova that has been drilled but needs filled
@@sendit2873 It can be tough to find, mine was GE brand but they no longer make it.
I don’t know if you’ve found one yet but I know that threebond 1211 works pretty good
You.is.a.one.big.goat