To Z1 Joe, will you please create this concept for a 8th gen Maxima. I have a 2017. The while enclosure design 👌 😍...love it. And the air coming in directly from the grill!. ....Yes!
I'm thinking really hard on getting it. Tryna see if its worth it. But most likely I will buy it to def show others whats up with it. I hope it complements my engine mods
Do you sell and silicone coupling with the step down diameter to use with current existing Stillen Z tube and stock box. I still even have the High Pressure collecter
I just got the intake installed. I had some issues but all good I just had to use the elbow for my 75mm throttle body instead of the one that comes with the intake because its way smaller then the 75mm throttle body. Thats my only issue. Is the elbow that comes with the intake dose not fit the 75mm throttle body
@@DarkMan2555 you can hear it suck air. Its loud lol. And for sure, you gain some power. I took it out to a meet yesterday and road the heck out the car with my buddy who has a Porche and I noticed more throttle response and my rpms were gaining faster
@@DadeBoi_Czer Nice. Thanks again for the info. I'll probably buy this intake over the Injen intake since this one is much easier to install than the Injen cold air intake
I just bought it as well, decided not to read the full description. Didn’t know it does not work on the 75MM throttle body, what elbow did you use I’m trying to find one that will replace it?
So how do you shame the air filter in the air box itself? I get the blue one is simple but I would assume there’s something in between the side duct to the air intake?
I might get one for my 06 G35 sedan, or the Injen cold air intake. It's too bad that it's not compatible with 75mm throttle bodies. The only thing you would need is a slightly bigger silicone coupler to go from the intake tube to the throttle body.
@@tcblackg35 True, but it can't be THAT much smaller, even if the intake tube is 2.5" in diameter. A 75mm throttle body is about 2.95", so it would not be that big of a difference...
@@tcblackg35 Also, if you go too big on the intake tube where the MAF is, you WILL need a tune, otherwise your car won't run very well. Most people don't want to get a tune until all their mods are done or nearly done.
Yooo, so it don't fit the 75mm throttle body??? I have that 75mm throttle body. I have z1 sleeves to fit the z1 intake pipe. What would I need to fit this? Should I call when I order and ask em?
![The Wall Song ร้องข้ามกำแพง | EP.213 | กรีน อัษฎาพร | 3 ต.ค. 67 [1/5]](http://i.ytimg.com/vi/3KrlLbCsadI/mqdefault.jpg)
Would love to see more options for the 03-06 sedan. The X version as well
literally we g35x owners get no aftermarket love man😞
Just installed this intake on my g35x
@@addisonmarsh9366 how’s it doing
@addisonmarsh9366 how u liking it? I figured being an awd wouldn't change anything with these style parts
Swung by and Picked mine up last Saturday, definitely compliments the engine bay. Hopefully I’ll get the car tuned by the end of the month
I do love this type of system to me it gives a good look to engine keeping it almost stock and of course it should sound louder.
this is beautiful i like the oem look 😮
To Z1 Joe, will you please create this concept for a 8th gen Maxima. I have a 2017.
The while enclosure design 👌 😍...love it. And the air coming in directly from the grill!. ....Yes!
I'm thinking really hard on getting it. Tryna see if its worth it. But most likely I will buy it to def show others whats up with it. I hope it complements my engine mods
make a vid on it w/ a sound clip! ill be there to see it
@@haystie definitely doing it. Ill be ordering it next week on payday lol
@@DadeBoi_Czer bet
Will still fit if I got the Mishmoto radiator
Yes
Any plans to do a closed air box intake for 350Z?
Hope you guy make a video of a fx35 first generation
Do you sell and silicone coupling with the step down diameter to use with current existing Stillen Z tube and stock box. I still even have the High Pressure collecter
Will it still fit if I'm running a throttle body spacer?
carb legal?
It was for a time, but unfortunately, it is not C.A.R.B. legal anymore.
I just got the intake installed. I had some issues but all good I just had to use the elbow for my 75mm throttle body instead of the one that comes with the intake because its way smaller then the 75mm throttle body. Thats my only issue. Is the elbow that comes with the intake dose not fit the 75mm throttle body
Thanks for the info! What does it sound like? I feel like the filter being in a closed box would make it sound muffled...
@@DarkMan2555 you can hear it suck air. Its loud lol. And for sure, you gain some power. I took it out to a meet yesterday and road the heck out the car with my buddy who has a Porche and I noticed more throttle response and my rpms were gaining faster
@@DadeBoi_Czer Nice. Thanks again for the info. I'll probably buy this intake over the Injen intake since this one is much easier to install than the Injen cold air intake
@@DarkMan2555 the filter is pretty big aswel I just wanna mention.
I just bought it as well, decided not to read the full description. Didn’t know it does not work on the 75MM throttle body, what elbow did you use I’m trying to find one that will replace it?
Has anyone noticed a whining sound from this intake when you shut the car off?
So how do you shame the air filter in the air box itself? I get the blue one is simple but I would assume there’s something in between the side duct to the air intake?
Is it CARB legal in California?
It was for a time, but unfortunately, it is not C.A.R.B. legal anymore.
Horsepower?
I might get one for my 06 G35 sedan, or the Injen cold air intake. It's too bad that it's not compatible with 75mm throttle bodies. The only thing you would need is a slightly bigger silicone coupler to go from the intake tube to the throttle body.
What good would that do if the intake tube is smaller anyways? You would need a bigger diameter intake to get any power out of a bigger throttle body.
@@tcblackg35 True, but it can't be THAT much smaller, even if the intake tube is 2.5" in diameter. A 75mm throttle body is about 2.95", so it would not be that big of a difference...
@@tcblackg35 Also, if you go too big on the intake tube where the MAF is, you WILL need a tune, otherwise your car won't run very well. Most people don't want to get a tune until all their mods are done or nearly done.
Yooo, so it don't fit the 75mm throttle body??? I have that 75mm throttle body. I have z1 sleeves to fit the z1 intake pipe.
What would I need to fit this? Should I call when I order and ask em?
@@DarkMan2555 I’ve heard that 75 mm throttle body is useless anyways unless you are running the 3” intake and tuned…
i only see a square maf housing.
this says it works for 03 g35.
03 g35 5at sedanhas a round maf
2002 03 or 2003 03 1/2