Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use th-cam.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
Hi.. At 8:38 on the video.. The green cap, where could I get one from. Mine has cracked and don't know the name or can't find one anywhere.. Please help.. Thanks..
Hi there, this is a filter - unfortunately this isn't something we have in stock but you could try getting in touch with Dual Pumps, they may be able to help you! Please find their website and contact details here - www.dualpumps.co.uk/ Thank you
Stewart, I have a Yanmar diesel power-washer. I just went out to try it for the first time time this year, I didn't electrically start it, turned on the water first and on the inlet side it just came pouring out of the green ringed thing on the bottom before water enters pump. You have one the same in your video, am I missing something, like a screw on cap? on the end of this or it this some type of safety mechanism that overflows? Thanks Harry
@@skyVacuk Hi, Just ordered a new green cap for inlet filter, just hope the frost hasn't damaged any internals, hopefully I'll get this in the next few days I'll give it a go. I see there is stuff called 'pump saver' for winter storage. I had in in the dry and covered, still had water supply connected to it though, that wont happen again, a good coating of WD40 wouldn't go a miss either for storage. On another note was going to add an additional 10 or 15 meters of hose to get up on roof and get around the house more, there would be a pressure drop with the longer distance? due to friction in pipe? I have an oil filled gauge with quick release, looks to be smaller the fittings on mine maybe 3/8..thanks Harry
Hello, thank you for your comment. We don't have a Stuart work here unfortunately - is it one of our pressure washers you have? If you wanted to ring our office on 01604 968700 we'll do what we can to help 🙂
technical term for stem? search on google and find nothing, wouldnt mind keeping a spare around, think it was just air this time around on our Clarke 195
Hi Nathan, thank you for your message apologies for the delayed reply I was just chasing up with our team the technical term for the 'Stem' this we refer to as the Unloader Valve - hope this helps and that you manage to find one! 🙂
Hi, my machine is same as this one in video. Last week my machine chemical injector worked great , first time I’ve used that part, today it didn’t siphon at atall. Any ideas why that would be. I did have a 10 m high pressure hose, but I replaced it yesterday with a different high pressure hose, could this be why. I now have a 20m hose , but no chemical came through at all
Hi Jo, thank you for your message. Sorry to hear you're having issues with your pressure washer - it will probably be best if we could arrange a telephone call with one of our technicians. This way we can discuss the problem you're experiencing in more detail and get to the route of the issue. How long have you had the machine for? If you would like to drop me an email with your details or call our office between 8 - 4, we'll be more than happy to advise. Kindest regards, Danielle Contact: 01604 968700 Email: danielle@spinaclean.com
You covered the basics, but not all of them, the lack of pressure could also be because the water supply has low pressure such as from a well with a small pump and tank (not city water) I noticed that when using mine at my sons home across the road from me. My pressure washer works great at my place but I seem to run out of water at his place when the water pump at the well has a low water level in the tank. You need to wait for the pump and tank to catch up so it can supply the pressure washer. The other could be that there is a kink in the garden hose
Hi there, thank you for taking the time to add some additional comments, these are greatly appreciated. This is a very old video of ours, moving forward we aim to improve our content and create more informative videos for our viewers 🙂
Hi there Ramon, If you'd like to contact our offices on +44(0)1604 968700 or drop us an email on info@spinaclean.com, we can get someone on the case with your pressure washer and help you out right away! Thank-you, Spinaclean
Hi Michael, is it one of our pressure washers you have - if so how long have you had it for? 🙂 there could be a range of reasons why the pump isn't sucking up water, it may be worth contacting R&S Industrial Cleaning Equipment as they carry out repairs on pressure washers - they can be found online here rsindustrialcleaningequipment.co.uk/ and are based in the UK Thank you
Hi there, thank you for your comments. We have took these on board and will produce our videos in the future ensuring better sound and / or subtitles. Kind regards, Spinaclean
Hi there, sorry to hear that. Due to this being quite an old video, we are working on our future videos to ensure they are much clearer in speech, and that subtitles may be added so they can easily be viewed by everybody - we will take your comments on board to ensure this doesn't happen. Thank you, Kindest Regards, The Spinaclean Team
@@skyVacuk - Thanks for the nice reply. Since you discussed some important topics with illustrations, I went through it again several times and at 10:15 you showed something I was not aware about. Hopefully that is my problem. I repair small engines of many types, but a customer wanted me to look at his pressure washer in which water would not flow from input hose to the outlet. All pressure washers I've seen allow water to flow from in to out, even with the engine off, but his would not. I removed, the unloader knob and assembly, and it looked fine, but I didn't know about the 'shuttle'. Again many thanks if you have a comment about this. North Central Florida, US
@@mrbrown6421 That's excellent, we are delighted to hear that you managed to understand certain parts of the video from looking at it - even more so that you may have found a solution to your customers problem! If you have any further issues, please do not hesitate to contact us on info@spinaclean.com and our team will do our upmost to help give you a better explanation on this issue. Take care and Kindest Regards, The Spinaclean Team
My Pressure Washer problem has been 'fixed'. The problem: No water flowing thru pump with engine running. The solution: Grab the engine governor and run the engine speed WAY up. This caused a stuck pump valve to become free and start working. Release the engine governor. I did NOT do this, and do not consider it a final solution, but somebody else did, and the owner was satisfied. I doubt this will help anybody, but this case is now considered closed. Best to all.
I would appreciate your advice on this please. I was using my petrol pressure on a job yesterday when suddenly my machine started aggressively jumping and down whilst washing. I quickly stopped the clean and investigated. All seemed fine. I'm no expert and still new to pressure washing so would appreciate any help here. The machine was working hard throughout with some tough weeds for at least 6 hours. The machine was fine on low pressure rinsing down so could it 1 too much constant use? 2 the surface cleaner faulty? 3 water not getting through the pump? 4 filter needs cleaning 5 none of the above Thank you for advice
Hi Clive, thank you for your message we are sorry to hear you are experiencing an issue with your pressure washer, we'll definitely do what we can to help! Which model do you have is it one of ours at all? If you could please email me on danielle@spinaclean.com so I have an email address for you, I will speak to our technicians and get back to you as soon as I can. How long have you had the pressure washer for do you know? 🙂 Kindest regards, Danielle
@@skyVacuk Hi Danielle. By thank you for your quick response. I have evolution 21ltm 2900psi Honda x390. Had it about 9 months. My email address is powercleanpatiosanddriveways@gmail.com. thanks so much. Regards Clive
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use th-cam.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
what a brilliant video thanks for sharing , easy to follow instruction
We're so glad you found this informative 🙂
I fixed my unloader valve by doing this. My set up is a little different though. But still good information thanks. 😁👌
Hi.. At 8:38 on the video.. The green cap, where could I get one from. Mine has cracked and don't know the name or can't find one anywhere.. Please help.. Thanks..
Hi there, this is a filter - unfortunately this isn't something we have in stock but you could try getting in touch with Dual Pumps, they may be able to help you!
Please find their website and contact details here - www.dualpumps.co.uk/
Thank you
Stewart, I have a Yanmar diesel power-washer. I just went out to try it for the first time time this year, I didn't electrically start it, turned on the water first and on the inlet side it just came pouring out of the green ringed thing on the bottom before water enters pump. You have one the same in your video, am I missing something, like a screw on cap? on the end of this or it this some type of safety mechanism that overflows? Thanks Harry
Just found part of the green cap, may have busted off on the frost!
Hello Harry, thank you for your comment. Do you still need assistance with this or have you managed to sort?
Kindest regards, Spinaclean
@@skyVacuk Hi,
Just ordered a new green cap for inlet filter, just hope the frost hasn't damaged any internals, hopefully I'll get this in the next few days I'll give it a go. I see there is stuff called 'pump saver' for winter storage. I had in in the dry and covered, still had water supply connected to it though, that wont happen again, a good coating of WD40 wouldn't go a miss either for storage. On another note was going to add an additional 10 or 15 meters of hose to get up on roof and get around the house more, there would be a pressure drop with the longer distance? due to friction in pipe? I have an oil filled gauge with quick release, looks to be smaller the fittings on mine maybe 3/8..thanks Harry
What where the two main areas I could understand the second issue he said unloader stem and….
hello mate , is stuart still working? need his help!
Hello, thank you for your comment. We don't have a Stuart work here unfortunately - is it one of our pressure washers you have? If you wanted to ring our office on 01604 968700 we'll do what we can to help 🙂
technical term for stem? search on google and find nothing, wouldnt mind keeping a spare around, think it was just air this time around on our Clarke 195
Hi Nathan, thank you for your message apologies for the delayed reply I was just chasing up with our team the technical term for the 'Stem' this we refer to as the Unloader Valve - hope this helps and that you manage to find one! 🙂
Hi, my machine is same as this one in video. Last week my machine chemical injector worked great , first time I’ve used that part, today it didn’t siphon at atall. Any ideas why that would be. I did have a 10 m high pressure hose, but I replaced it yesterday with a different high pressure hose, could this be why. I now have a 20m hose , but no chemical came through at all
Hi Jo, thank you for your message. Sorry to hear you're having issues with your pressure washer - it will probably be best if we could arrange a telephone call with one of our technicians. This way we can discuss the problem you're experiencing in more detail and get to the route of the issue. How long have you had the machine for? If you would like to drop me an email with your details or call our office between 8 - 4, we'll be more than happy to advise.
Kindest regards, Danielle
Contact: 01604 968700
Email: danielle@spinaclean.com
pressurewasher loses rpms when wand is engaded but still has good pressure on water sprayer what is making it lose rpms
@@KennyPatton79 any leak will immidetly drop the pressure 1000+psi
I'm getting no water out my bypass and starts shooting out my pressure relief valve
Sorry to hear that, is this one of our machines you have?
@@skyVacuk hav a 5gal 3500psi skid
You covered the basics, but not all of them, the lack of pressure could also be because the water supply has low pressure such as from a well with a small pump and tank (not city water) I noticed that when using mine at my sons home across the road from me. My pressure washer works great at my place but I seem to run out of water at his place when the water pump at the well has a low water level in the tank. You need to wait for the pump and tank to catch up so it can supply the pressure washer. The other could be that there is a kink in the garden hose
Hi there, thank you for taking the time to add some additional comments, these are greatly appreciated. This is a very old video of ours, moving forward we aim to improve our content and create more informative videos for our viewers 🙂
Brilliant ! Literally watching this video to resolve my problem and it was the hose all along thank you so much I’m back up and running strong
Excellent video and much appreciated.
Please do a gas leak video for that same pressure washer.
Any ideal what wrong with my pressure, it is work on yellow, green and black tips, but the pump will stop and go when I using white or red tips!
Hi there, sorry to hear you are having issues with your machine, which pressure washer do you have is it one of ours? Thank you
Thanks for the video, very useful.
When I take my hand off the pressure washer handle the machine shuts off
When the pressure on the water it's not continue is pause it the same problem?
Hi there Ramon,
If you'd like to contact our offices on +44(0)1604 968700 or drop us an email on info@spinaclean.com, we can get someone on the case with your pressure washer and help you out right away!
Thank-you,
Spinaclean
You may not have enough water being fed into the machine
What cause the pump not to suck water
Hi Michael, is it one of our pressure washers you have - if so how long have you had it for? 🙂 there could be a range of reasons why the pump isn't sucking up water, it may be worth contacting R&S Industrial Cleaning Equipment as they carry out repairs on pressure washers - they can be found online here rsindustrialcleaningequipment.co.uk/ and are based in the UK
Thank you
You need subtitles or a better mic. I can't make out half of what your saying.
Hi there, thank you for your comments. We have took these on board and will produce our videos in the future ensuring better sound and / or subtitles. Kind regards, Spinaclean
You need a hearing aid pal
Yeah
I'm sure you're telling exactly what I want to know...
...but this poor American can't understand a dang thang.
Thanks anyway.
Hi there, sorry to hear that. Due to this being quite an old video, we are working on our future videos to ensure they are much clearer in speech, and that subtitles may be added so they can easily be viewed by everybody - we will take your comments on board to ensure this doesn't happen.
Thank you, Kindest Regards, The Spinaclean Team
@@skyVacuk - Thanks for the nice reply.
Since you discussed some important topics with illustrations,
I went through it again several times and at 10:15 you showed
something I was not aware about. Hopefully that is my problem.
I repair small engines of many types, but a customer wanted
me to look at his pressure washer in which water would not
flow from input hose to the outlet. All pressure washers I've
seen allow water to flow from in to out, even with the
engine off, but his would not. I removed, the unloader knob
and assembly, and it looked fine, but I didn't know about
the 'shuttle'.
Again many thanks if you have a comment about this.
North Central Florida, US
@@mrbrown6421 That's excellent, we are delighted to hear that you managed to understand certain parts of the video from looking at it - even more so that you may have found a solution to your customers problem! If you have any further issues, please do not hesitate to contact us on info@spinaclean.com and our team will do our upmost to help give you a better explanation on this issue.
Take care and Kindest Regards, The Spinaclean Team
My Pressure Washer problem has been 'fixed'.
The problem: No water flowing thru pump with engine running.
The solution: Grab the engine governor and run the engine speed WAY up.
This caused a stuck pump valve to become free and start working.
Release the engine governor.
I did NOT do this, and do not consider it a final solution,
but somebody else did, and the owner was satisfied.
I doubt this will help anybody, but this case is now considered closed.
Best to all.
Oring 3x6 ...2,62x10,77 😂
VERY BAD AUDIO PLUS HEAVY ACCENT FROM WHO KNOWS ---RONSTER
I would appreciate your advice on this please. I was using my petrol pressure on a job yesterday when suddenly my machine started aggressively jumping and down whilst washing. I quickly stopped the clean and investigated. All seemed fine. I'm no expert and still new to pressure washing so would appreciate any help here.
The machine was working hard throughout with some tough weeds for at least 6 hours. The machine was fine on low pressure rinsing down so could it
1 too much constant use?
2 the surface cleaner faulty?
3 water not getting through the pump?
4 filter needs cleaning
5 none of the above
Thank you for advice
Hi Clive, thank you for your message we are sorry to hear you are experiencing an issue with your pressure washer, we'll definitely do what we can to help! Which model do you have is it one of ours at all? If you could please email me on danielle@spinaclean.com so I have an email address for you, I will speak to our technicians and get back to you as soon as I can. How long have you had the pressure washer for do you know? 🙂
Kindest regards, Danielle
@@skyVacuk Hi Danielle. By thank you for your quick response. I have evolution 21ltm 2900psi Honda x390. Had it about 9 months. My email address is powercleanpatiosanddriveways@gmail.com. thanks so much. Regards Clive
@@clivebernath3490 Thank you Clive, I will be in touch shortly by email with some further details of how we can help!
@@clivebernath3490 sounds like not enough water... your pump is going to need a rebuild.