DDJ-1000SRT Firmware Update (WINDOWS) (HD) **FIRST FIRMWARE UPDATE**

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ธ.ค. 2024

ความคิดเห็น • 34

  • @lentoviolento0418
    @lentoviolento0418 ปีที่แล้ว +2

    Finally did it, your explanation. Was good and practical thank you, i tried so many times . Mine is a ddj 1000

  • @ITSDJTND
    @ITSDJTND 10 หลายเดือนก่อน +1

    Great help!

    • @ByronRamos_
      @ByronRamos_  8 หลายเดือนก่อน

      No problem !

  • @Iloveyoutube11
    @Iloveyoutube11 5 ปีที่แล้ว +3

    You can also see what version it is on the Fx screen right as you turn it on.

    • @ByronRamos_
      @ByronRamos_  5 ปีที่แล้ว

      Good to know ! Thanks. 👍

  • @deejaytravis1vevo907
    @deejaytravis1vevo907 ปีที่แล้ว

    Please I have this can of problem in my ddjsz2 please help me 🙏🙏

  • @MasterDJRenn
    @MasterDJRenn 4 ปีที่แล้ว +1

    Do you know what bugs the update fixed? been trying to get on Pioneer DJ website for days but it seems to be down.

    • @ByronRamos_
      @ByronRamos_  4 ปีที่แล้ว +1

      I went to the website and it works at the moment. But this is what was fixed.
      The BPM values that are shown on the DDJ-1000SRT Beat FX display and in Serato DJ Pro virtual deck, did not sync.
      Sampler sound did not come out from the headphone output when the Sampler Cue button was pressed while the Sampler volume level was at its lowest.
      The MIDI message for the Sampler VOL knob has been changed in line with this fix.
      Got that info from their support section.
      www.pioneerdj.com/en-us/support/software/controller/ddj-1000srt/

    • @MasterDJRenn
      @MasterDJRenn 4 ปีที่แล้ว +1

      Byron Ramos Thanks 🙏😀

  • @rickdj5014
    @rickdj5014 5 ปีที่แล้ว +1

    Hi Byron.
    I got the DDj 1000 and I tryed update the firmware but I didn`t get sucessfull.
    I did as u did but sure I got the properly program for DDJ 1000.
    The fact is that nothing happen when I try lauch the firmware trought my computer.
    It is not show up any msg like error.
    In the guide on official site I saw if u turn the controler holding 4 beat loop and slip reverse, the controler starts as firmware mode and even this way I could update my controller.
    I checked everything like cable on port A usb it was connected on my lap top.
    Do u have any idea what is going on?

    • @ByronRamos_
      @ByronRamos_  5 ปีที่แล้ว

      Hmmm i am not sure man.
      If you are on Facebook join this DDJ-1000SRT group and ask there ! Im pretty sure there might be someone to help you out !
      facebook.com/groups/616062042250120/

  • @djgenius626
    @djgenius626 3 ปีที่แล้ว +1

    Thank you very much, bought the 1000 and was wondering why it wasn't showing up

    • @ByronRamos_
      @ByronRamos_  3 ปีที่แล้ว

      Welcome !
      Here is when i did the latest 1.05 update !
      th-cam.com/video/l_EGUp8bM6Y/w-d-xo.html

  • @dj_cip
    @dj_cip 3 ปีที่แล้ว +2

    Good chit homie. Thank you.

    • @ByronRamos_
      @ByronRamos_  3 ปีที่แล้ว

      Welcome. Here's the most recent firmware update video for the 1000SRT !
      th-cam.com/video/l_EGUp8bM6Y/w-d-xo.html

  • @melissahollandsbiggestfan5812
    @melissahollandsbiggestfan5812 5 ปีที่แล้ว +1

    Your z is na-tt. How much did it cost to tt convert it? And did you have to swap or rebuild any internals for anything? I just came across this car again and I want one for a first car I think. I can’t decide yet, but if I buy one I plan on keeping for a while and maybe tt converting it when I save a little more money

    • @ByronRamos_
      @ByronRamos_  5 ปีที่แล้ว +1

      Hello sorry for the late reply. So when i went from NA to NA-TT i would say all parts were around 3K - 4K. That was in late 2015 early 2016. I did the labor myself. Initially when i first went NA-TT, i kept the NA engine stock as far as the internals and just bolted up all the TT stuff to it. I ran it like that for a year or two then i decided to go for more power so i built the bottom end with forged internals. Which is what i'm currently running. (10.5:1 High Compression) Wiseco pistons (87.5mm), Scat rods, King Racing XP bearings and ARP 2000 studs for the heads and mains. She's bulletproof now and can probably handle 900RWHP but my stock auto turbos and fuel system (Nismo 740cc) are holding me back. Anything over 500whp i would recommend for you to build your bottom end. Just to have that piece of mind and not having to pull your engine frequently. Before i forget, i do want to mention that i am running strictly E85 on my high comp setup. 🙂

    • @melissahollandsbiggestfan5812
      @melissahollandsbiggestfan5812 5 ปีที่แล้ว +1

      Byron Ramos thank you so much dude :) I’m really looking forward to a first car. Perhaps this is the one

    • @ByronRamos_
      @ByronRamos_  5 ปีที่แล้ว

      @@melissahollandsbiggestfan5812 Good luck ! 🙂

  • @speedyboishan87
    @speedyboishan87 3 ปีที่แล้ว +1

    Excellent tutorial, I sell firmware update discs for both DVJ1000 and DVJ-X1, finding the model number is easy it's at the right top. Most have not updated their DJ mixers by Pioneer, it is simple and easy.

  • @clarencerodgers1059
    @clarencerodgers1059 ปีที่แล้ว +1

    Thanks a mill bro ❤❤❤

  • @jesuscarmona4285
    @jesuscarmona4285 2 ปีที่แล้ว

    Very helpful video! Thank you

    • @jesuscarmona4285
      @jesuscarmona4285 2 ปีที่แล้ว

      I tried to check to see if I have the pioneer folder but it doesn’t come up, I’ve tried it a few times

  • @henrylandrum2960
    @henrylandrum2960 5 ปีที่แล้ว +1

    What are you using to hang your headphones on?

    • @ByronRamos_
      @ByronRamos_  5 ปีที่แล้ว

      Nothing fancy it's simply a 1in steel spring clamp hanging on to my desk from Harbor Freight. Lol Check if you have Harbor Freight local to you. Here's the link so you know what i'm talking about.
      www.harborfreight.com/1-inch-capacity-steel-spring-clamp-39569.html

  • @bishalnath616
    @bishalnath616 4 ปีที่แล้ว +1

    What's that laptop that you are using?

    • @ByronRamos_
      @ByronRamos_  4 ปีที่แล้ว

      On that video i was using an old HP laptop that i bought in 2015.

    • @bishalnath616
      @bishalnath616 4 ปีที่แล้ว

      @@ByronRamos_ thanks a lot and btw can you suggest me a good windows laptop that i can use for djing now?

  • @Earthcitizen4609
    @Earthcitizen4609 4 ปีที่แล้ว +1

    Thanks

  • @redsoundzzentertainment
    @redsoundzzentertainment 4 ปีที่แล้ว +1

    Thanks bro