Goxawee Rotary Tool G4007 Review And Attachment Overview
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- In this video I give an overview of the Goxawee Rotary Tool and give my review . I show the different attachments and bits that it comes with. I show how to attach the wand attachment. Thanks for watching!
AFFILIATE DISCLAIMER PLEASE READ:
The links below are affiliate links. This means I will earn a small commission, at no additional cost to you, if you choose to click the link and make a qualifying purchase. As an Amazon Associate I earn from qualifying purchases.
Amazon:
Goxawee Rotary Tool Kit On Amazon (Choose Your Color) - amzn.to/3mljvXK
Basic Safety Equipment - Safety Glasses On Amazon - amzn.to/3IDvbfU
Basic Safety Equipment - Nitrile Gloves On Amazon - amzn.to/3J6BUAx
Basic Safety Equipment - N95 Masks On Amazon - amzn.to/41BrTCy
Basic Safety Equipment - Earplugs On Amazon - amzn.to/3kFfj4u
DISCLAIMER PLEASE READ:
For reasons beyond the control of Todd’s Garage there is no guarantee of the information in this video and/or description. Use of the information in this video and/or description is at your own risk. Todd’s Garage recommends the use of proper safety equipment and taking all safety precautions when working with the tools, items, or other things seen or talked about in this video and/or description. The information in this video and/or description does not guarantee a certain result or warranty of any kind, expressed or implied. Under no circumstances shall Todd’s Garage have any liability or responsibility for any injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description. Any Injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description is the sole responsibility and liability of the user.
I just wanna say THANK YOU A THOUSAND TIMES for repeating over & over again about putting on SAFETY GOGGLES. & I’m so glad I listened because the sanding drum flew off while I was sanding (I probably need more practice with assembly) & it could have been a disaster had I not been wearing these heavy duty protective goggles. So, for any newbies like me, or anyone who needs to be reminded, please remember to gear up ~ Gloves, goggles that are prescribed by the manufacturer & I use the N95 Respirator Mask. ❤️😊
I've just ordered this actual tool from Amazon. Your video is the most complete and helpful one I've found. Thank you!
Bought this kit a couple years back, could not be happier! The fact that it comes with all that it does, for the price that it is, makes it a very attractive offering. Even Dremel brand tools don't come with as much; you have to buy most of the accessories separately, or you have to buy more than one kit to get everything that that this comes with, and even then, the flex shaft is a guaranteed sold separately item, as there are no Dremel kits that include it. Edit: Actually, I take that back; there is ONE Dremel kit that includes the flex shaft, but it's almost 4 times the price of this kit.
I throw my gratitude in as well!!! My dad passed so long ago... 8 don't get good advice on this kick butt stuff, so thanks so much( and from my dad, too)!🤩
Thanks for watching Kristiana, I appreciate it. I am glad you liked this video and it gave you an opportunity to remember your Dad!
Thanks a million, my instruction booklet was sparse land and I've been slowly learning the tool.This has cleared up everything.
Hi and thanks for watching, I am glad the video was helpful!
Fantastic video Todd, I really appreciate it. I bought this kit a couple years ago, can't even remember what for to be honest. I've got a project now where it will come in handy but wasn't sure which attachment would work best (stripping left over powder coating off metal), but this helped a lot. Thanks!
Thanks for watching, I am glad the video helped!
Thank you for the thorough overview. This is my first rotary tool and the user manual had very limited information.
Very thorough and informative video for this tool! They should hook this up with a scan code on the instruction manual to help explain to customers, especially those of us who are “visual” learners! Excellent video! Thank you so much for sharing!! ❤
Thank you soooo much! I just bought mine & was lost. The instructions they provided weren’t clear to me. You really helped me a whole lot. ❤️😁
i loved the presentation, but I would have benefited more from seeing it in action . to see how it performed with the attachments . That way i could iron out some of the possible issues i've had with mine. thanks for the video tho .
Thanks, I just purchased this and the manual wasn't very helpful. This video was!
Thank you, I appriciate the feedback!
I felt like I was crazy for having issues with the manual.
Your video was SO helpful. I really appreciate you going over each accessory.
Hi Kimberly, thanks for watching, I am glad the video was helpful!
Excellent review! I just bought one and didn't have a clue what to do until I saw this video. Thank you so much!
Works really good, just used it couple days ago for two hours almost non stop. That was a good test
I took a screenshot of the back page of the owner's manual. Will call the 1 800 number and see if they will send me another manual. The tool itself has it's model number printed on the side. So this could work.
I'm thrilled! There's things this can help me with in the future. The sooner practice can begin, the sooner I can safely use my little treasure.
Just ordered one, arriving today, so I thank you for this
Awesome, thanks for watching, hope you like it!
What’s flixzone ?
How do you keep the attachments from coming off while using it? Followed all the instructions here but not working. So frustrating!!!!
"Once I have it hand tight, I'm gonna use the wrench to get it all the way tight." Why are you the only one I've seen so far who managed to figure that part out? TH-cam scares the hell outta me, man.
Thanks for sharing this. I bought this exact same tool ~18 months ago and I'd never used the wand. So far I've been unimpressed with its performance, but I'm looking up videos just to make sure I'm using everything correctly before I pass judgment, lol.
Thanks for watching and sharing your story!
I haven't had much success with mine yet, but like you i wanted to know if i was using it right. using the wand i found it was a big reach to turn it on and off whilst holding onto the business end which was spinning furiously. hope you get on better with it now .
thank you for this. I bought one and now I know where to start.
Thank you for this instructional video. Mine just arrived today and the part on how to use the wrench to change the chuck is not in the instructions. That's kind of like the most important thing to know about the tool!
Just what i want to see 😊 thank you so much
At 13:36, the L-shaped tool used is not an Allen wrench. The opening it fits into is round, not hexagonal.
The polishing compound and the felt wheel would work well to remove a scratch on my gopro lens cover? thx in advance
Lovely video! the only this is hook up the atachment , in the cable I have a metalic mark nod in the cable to insert in the key chuck. Question: it have to be in side or outside the key chuck or use as a mark? thy!
How do I put the bits inside of the flexshaft it want fit
Thanks for the video. The bits that come with the kit don't look that impressive. I bought a 10 piece burr set for wood carving projects off of Amazon and it works GREAT! 😃
Thanks a million!
For the Flex shaft, I have yet to have installed mine, but there doesn’t seem to be that needle - in the metal cylinder.
Does a hind know if I’ll have to get a replacement entirely - or if there’s some sorta fix?
My flex shaft (the little cable) is too far inside the metal base for me to grab it. Any suggestions?
Very informative…thanks
Super thanks for the vid !
Thanks for watching, I appreciate it!
Which one would you use to remove grout
Thank you!
Does it drill perfect holes?
such a professional video. thank you very much.
What chucks fit this, I need to buy a new one but cant find one that fits. Anybody had the same problem.
Really helpful thank you
Excellent video Todd. Better than any other available. Did you ever get your saw discs they forgot to include? I hope so. Thanks.
Can I use it for carving stones? Tiny rocks I mean
A couple years ago I bought one of these great tools! Took the owner's manual out to study for safety use.
Life happened and I have been unable to find it again. Life isn't as unpredictable now. I'd like to learn how to use this tool.
Is there any way I can get a new owner's manual?
Am I being really dense? What the hell is a hardness scale of 3.5 degrees?
If they mean the mohs scale your finger nail is 2 so that pretty much can’t be used for anything but maybe chalk?
Which might explain why I can’t get them to work on wood. Has anyone else had issues with the rotary burrs, I’m just trying to decide if we send it back. It’s a bit hard to judge considering they have given maybe ?? a mineral rating for wood that isn’t graded that way (as far as I’m aware) for the wood tool attachments 🤦🏻♀️
Good video.. thanks
I have this exact one and the end of the wand doesn’t have any jaws to hold the bits
Thanks for watching, I am not sure what might be going on with yours. I would reach out to the company to see if they can help further. Thanks again for watching and good luck!
Not sure why the tool is not quick or powerful enough to work with stone, teeth, even with bamboo? I not sue it correctly?
Thanks for the video! I've tried everything I can think of to insert the two smallest drill bits tightly using the flex shaft. Is that not possible?
i would love to know the answer to that. every time i try to use the small bits the chuck comes loose , i think they're too thin to hold ? I can't get it to stay in the grinder chuck either
All I need it for is to clean welding beads
You sound like Count Olaf when he is pretending to be a snake expert😂
Thanks. Very helpful
Thanks for watching!
I’m still confused with opening up the tool to insert Dremel bits in there. I’ve been turning it and it just won’t unlock. I’ve been letting the button go and it’s still not working. Can you help out?
Can you let me know what model you are using?
And you are having problem taking out /or tighten the collar, right?
@@angelisone I eventually go it taken care of. Thank you :)
@@JosueAguilar_01 This tool comes with a ATG's keyless chuck, very rare for this wonderful price.
Usually you have to buy the ATG since many do not come with it.
Can I just offer a bit of friendly advice? Stop saying "Alright guys" to clean up the video.😉 Thank you for this.
Thanks for watching! I appriciate the feedback.
Thanks for the awesome instructions! I have some questions. Do you know what the collet is for & why use it instead of the keyless chuck? and what are carbon brushes for, is it ok to not use them? thanks
I also tried screwing the sanding drum in tightly, but it comes off a bit easily :( not sure how to fix this
Hi thanks for watching! Not sure on the collet, the carbon brushes are replacements for the one that's in there as it wears down. Thanks again!
If might be an issue with that particular sanding drum being slightly to large, I would try another. If the issue persists I would contact the manufacturer and ask for a new bit. Thanks again!
@@ToddsGarage thanks!
Do you have a video using the router?
Not yet but it's on my list to make soon. Thanks again for watching.
Very helpful 👍
Thanks for watching, I am glad the video was helpful!
Got this whole set on Amazon for 31.99!
Thanks for watching, hope you like it!
I appreciate the explanations for all the bits and stuff, since I sorta new at this " rotary tool" world.
How many watts is this rotary tool?
Thanks for watching, glad you liked the video, I am not sure how many watts it has.
It is 130 Watts
8,000 - 30,000 RPMs
For some reason it only supports 110V... Or at least that's what the manual says lol
@@danielchrisronan2281 Thanks for the reply! Cheers.
You sound like iDubbbz, which feels weird. He wouldn't make this type of video 😆 Very helpful review though, thanks!
Haha! I have heard that before lol. Thank you for watching!
This is a dangerous tool involving the locking mechanism being faulty and the tool heating up too fast
Its a g4098
I don’t think they sent me the actual manual 😭 everything else seems right lmao
Use it for cosplay lol
Why is everyone showing us how to install the sanding bits and not the cutting bits. Good video but just wasted my time awaiting for the drill bit assembly. I guess I have to keep searching for answers. Why do you think we bought this thing? NOT FOR SANDING ONLY
Sorry I didn't demo that Laura, I'll try to make a video in the future of that. Thanks for watching!