The 190s are such a lovely looking car, I always think some 17 inch or maybe 18 inch oz motorsport alloys are the only wheel to replace the original ones
I gave you a "Like" but also wish to offer a feedback: as the entire video clip is cloudy, the cameraman needs to clean the lens thoroughly before recording. Do keep up the excellent work.
I’m not saying I’m salty about not winning a mini… *cough* But a banger of a new series from you guys will ease the pain 😂 Quality as always! Look forward to the next one!
pls, pls pls, keep doing this suv=bset of the main channel - it's amazing and you learn so much regarding detailing too the car looks amazing - marked improvement, and, as always, admire your honesty me old mucca and I will be getting in touch regarding getting your excellent products incidentally, see you're using the AVA pressure washer; what did you think of it?
I want to do those subtle rear wheel arch cut out/flare on my 89’ W201 2.6. I’ve had it for 22 years. Still an absolute pleasure to drive, but I’d love to widen the stance. I don’t want to try and pretend, it’s a full EVO -2.… Any suggestions?
Hi, your video came up on my list and i was nearly in tears, my 190e looks just like this but with 5 spoke AMG alloys. mine has been stood for over 10 years in my back garden and i am unable to do anything as i am now disabled. I would love your help if you have time? Dabs from Derby UK...x
Most likely you’re applying to much product. I only apply one spray per panel maybe two for larger areas max! Also, try not to apply in direct sunlight onto warm/hot paintwork
I use bubblor on my paintwork but it doesn’t look near enough foamy as yours? I put in 6-7 cap’s into a usual sized bucket. Any recommendations to get more think suds on my shampoo for the contact stage?
Im sorry.. this is very amateur .. 1.. you would never do this for a real client in the sun and dust next to a road... 2. even in doors your doing a panel at a time, your sprays are a fluid left right left right.. not justa "soak it mate" .. the car is a amazing and considering the state of the car originally probably no damage done and it "looked" much cleaner.
Nobody's bringing anything back, that's a bait. Don't be delusional, nothing good ever happens in this world of damned, and it never gets any better every day.
A satisfying watch 😊 I’m a new arrival to Stjarnagloss, ordered my products and I can’t wait to get stuck in 💪🏻
Amazing. Incredible work. Well Done!
Smashed that!! Whoever puts the playlist together for your videos deserves a pay rise!
I'm a 190e owner. Great to see many 190e there.. And cosworth. It is very rare here in Malaysia.. Good job for detailing the cossie!
LOVE THE MERCEDES ❤️❤️
Amazing Job, I want to see the 190E Grey Color, that one sure is Beautiful......😃
Never seen more 190es in a single video 🤩🤩
Gr8 video.. and the drum and bass music really adds to it.. 👍 👌
You can do mine next if yous like. Amazing work fellas
The 190s are such a lovely looking car, I always think some 17 inch or maybe 18 inch oz motorsport alloys are the only wheel to replace the original ones
I absolutely love watching your videos,Jack, keep them coming!❤❤❤❤❤❤
Killin' it with the dnb tracks ! 🤙
does Stjarnagloss make a cirtus concentrate?
I gave you a "Like" but also wish to offer a feedback: as the entire video clip is cloudy, the cameraman needs to clean the lens thoroughly before recording. Do keep up the excellent work.
thats just the camera dude
Great work Bud 👍👍Love the 190 😀😀
Very cool, glad I found your channel👌Liked&subbed👍
Really good video. Keep it up man. Its on par with AMMO NYC And other pro detailers channels.
Great work 👏🏽
Loved watching this geez, were are you based need to bring my 190e to you
Great video as always Cav! 👍
Such a cool video 👍👍👍👍
I’m not saying I’m salty about not winning a mini… *cough*
But a banger of a new series from you guys will ease the pain 😂
Quality as always! Look forward to the next one!
You're lucky to still have wishes.
Nice work 👏
These motors are the bollocks . Decent content geezer
I NEED that pink Jerry can 😩
Just started using your products. Forst in particular is amazing!!
Thanks bro
Looks amazing
Skara doing work!!
Great vid, come and do my Merc Cossy if ya like lol That non standard grill needs to go lol
Agreed. Get rid of that grille
pls, pls pls, keep doing this suv=bset of the main channel - it's amazing and you learn so much regarding detailing too
the car looks amazing - marked improvement, and, as always, admire your honesty me old mucca and I will be getting in touch regarding getting your excellent products
incidentally, see you're using the AVA pressure washer; what did you think of it?
This is amazing love all the work you do keep it up
What a stunner 😍😍😂
I want to do those subtle rear wheel arch cut out/flare on my 89’ W201 2.6. I’ve had it for 22 years. Still an absolute pleasure to drive, but I’d love to widen the stance. I don’t want to try and pretend, it’s a full EVO -2.… Any suggestions?
Cav this is a bit of me top work Son hope your well mate
Cheers bud, definitely had to put a shift in but worth it in the end
Did you use the “fallout remover” with the clay bar?
Rip the white T-shirt 😆😆
Superb....
Amazing video can't wait to see the next! Keep em coming! 🔥🔥🔥
Thank you sir. Next ones already shot and in conversation with episode 3 and 4 now
Hi, your video came up on my list and i was nearly in tears, my 190e looks just like this but with 5 spoke AMG alloys. mine has been stood for over 10 years in my back garden and i am unable to do anything as i am now disabled. I would love your help if you have time? Dabs from Derby UK...x
What pads are you using on the da?
Great vid as always. Did you use a microfibre cutting pad to put the skara on
What type of Mercedes is the white one that's slammed??
Either a c36 or c43 amg
Are you guys in South Wales by any chance?
Yes Cav🤝🏻
I have the quick detailed slike and it seems it leave a lot of streaks and is hard to get off. Any tips?
Most likely you’re applying to much product. I only apply one spray per panel maybe two for larger areas max! Also, try not to apply in direct sunlight onto warm/hot paintwork
@@glennscott4571 spot on I’ll try applying a bit less. Had a great finish once off just took a while
@@glennscott4571 solid advice
I use bubblor on my paintwork but it doesn’t look near enough foamy as yours? I put in 6-7 cap’s into a usual sized bucket. Any recommendations to get more think suds on my shampoo for the contact stage?
Hello bud, if you are more interested in foam and lubrication try Matta next time.
@@stjarnagloss thanks bud 👍🏻 proper legend by the way and the reason I started getting into detailing 🤙🏻
@@aarongeary5076 that means a lot. Thank you 💚
What was that green stuff he used to remove dirt from body?
That was the clay bar and lubricant: Lera and Glir
Is this the Lenny urban guy or a very good look a like ?
Any tips for a first timer using a machine polisher
Grab a scrap panel from the scrapyard and have a play. It’s all about confidence and practice
@@stjarnagloss thanks for the advice
What pressure washer you using
Ava p80 my friend
@@stjarnagloss keep up the great work
Did you use shampoo in the foam cannon the 2nd time or was it sno foam again? Great video by the way.
That was a bit of Snö that was left in the lance topped up with 50ML of Matta shampoo bud
Love the content. Can’t use anything else other than your products these days. Need to make another order 🤷🏻😂
Thank you so much 😊
You forgot to touch the windshield wiper plastic.
You forgot to do the front wiper
How do you let this baby sit for 10 years with no love? We need something like the ASPCA that rescues animals, but for cars.
Not sure why you didn’t use an iron remover before using a clay bar.
I did
You missed out saying 16V!
mikadoir?
What COSWORTH means? Because I heard this name on a Ford Escort.
It’s a tuning company that have added value to a handful of saloons and hatchbacks
Top job class car
This is some awesome content. Gets way less views than it deserves.
We’re plugging away bud, it will come but thank you 💚
Oh shit it’s Nathan Gorman’s twin
Can you save my cupra 😩
Email us some pictures to info@stjarnagloss.com
I have a car stood outside for 14yrs untouched if your interested 😉
ENGINE BAY ???
Im sorry.. this is very amateur .. 1.. you would never do this for a real client in the sun and dust next to a road... 2. even in doors your doing a panel at a time, your sprays are a fluid left right left right.. not justa "soak it mate" .. the car is a amazing and considering the state of the car originally probably no damage done and it "looked" much cleaner.
Need a hair cut son
Nobody's bringing anything back, that's a bait. Don't be delusional, nothing good ever happens in this world of damned, and it never gets any better every day.
what's your email address?
Info@stjarnagloss.com