I was expecting a raccoon to pop out of that cluster door when you popped it open! Good to know these are easy peasy with the APP and the AD2011 cable. Thanks Jay!
Would a 2019 pacifica with gateway module need the 12+8 bypass cable along with the 2011 cable to program fobs ? I take it for the 2017 you are only hooking into that port in the c pillar. Thanks
@@locksny Thanks, I plan on getting one of those 2011 cables. Here's what I ended up doing. I got a TOPDON T-Ninja Pro, it said 17 and 18 Pacifica it would pull the pin, but not the 2019 yet, So I asked a friend who works for Chrysler for the pin, He gave me a 4 digit pin, didn't work. So I drove to the dealer and he programmed the key for free. I spoke with Topdon and they said the pin is 5 digits just like your video. So now I'm going to check with another dealer and see if they can give me the 5 digit pin. I used just the 12+8 and probably would have had no problem if I had the right pin code.
I'm just getting into the business. Where do you buy your remotes from and maybe a video of which tools are best and which ones you wish you NEVER bought?
I own a locksmith company and a lot of times you’ll run in to the RFH being locked on the 2018 and up DC&J’s & your stuck & can’t do nothing which sucks. I actually just bought my wife a 2021 Chrysler Pacifica this weekend from the dealer and ordered me an extra OEM smart key because it only had 1 key and went to program it this morning and the RFHUb was locked so there’s no password so now I got to take it up to the dealer so they can program it for me which they’re not gonna charge me but still sucks when you do this for a living and you can’t even do it yourself & you got all the equipment when you run into this.
Would that port location be the same for the 2018’s and up ?? I know the sgb is under the radio, but wasn’t sure about the bypass port ??? And glad to know the AD cable will work !
The instructions on the AutoProPad did NOT indicate pressing the "LOCK" Button at ANY time. Read the instructions BEFORE you start the process. You got LUCKY this time!
I was stuck in mountains and then someone came and do the same. Locks and unlocks but car only starts with pushing the start/stop button with the fob. Not without it. It says Key Fob not detected. What could be the reason?
@syedrizvi7813 It sounds like a refurbished key. If you have to tap the button to start the van, the key was not unlocked properly. You shouldn't have to tap the button with prox to start your van.
I was expecting a raccoon to pop out of that cluster door when you popped it open! Good to know these are easy peasy with the APP and the AD2011 cable. Thanks Jay!
Another one for your file :)
Would a 2019 pacifica with gateway module need the 12+8 bypass cable along with the 2011 cable to program fobs ? I take it for the 2017 you are only hooking into that port in the c pillar. Thanks
19 should be the same way unless the Gateway has been locked.
@@locksny Thanks, I plan on getting one of those 2011 cables. Here's what I ended up doing. I got a TOPDON T-Ninja Pro, it said 17 and 18 Pacifica it would pull the pin, but not the 2019 yet, So I asked a friend who works for Chrysler for the pin, He gave me a 4 digit pin, didn't work. So I drove to the dealer and he programmed the key for free. I spoke with Topdon and they said the pin is 5 digits just like your video. So now I'm going to check with another dealer and see if they can give me the 5 digit pin. I used just the 12+8 and probably would have had no problem if I had the right pin code.
@@jackroy6524 There are Two pin codes, 4 Digit for dealers and 5 digit for aftermarket tools. If you are using oem tools a 4 digit pin will work.
Do you know if Chrysler started using a 5 digit pin code when they started using the RFH module vs the WIN module 4 digit pin code ?
I'm just getting into the business. Where do you buy your remotes from and maybe a video of which tools are best and which ones you wish you NEVER bought?
I own a locksmith company and a lot of times you’ll run in to the RFH being locked on the 2018 and up DC&J’s & your stuck & can’t do nothing which sucks. I actually just bought my wife a 2021 Chrysler Pacifica this weekend from the dealer and ordered me an extra OEM smart key because it only had 1 key and went to program it this morning and the RFHUb was locked so there’s no password so now I got to take it up to the dealer so they can program it for me which they’re not gonna charge me but still sucks when you do this for a living and you can’t even do it yourself & you got all the equipment when you run into this.
Would that port location be the same for the 2018’s and up ?? I know the sgb is under the radio, but wasn’t sure about the bypass port ??? And glad to know the AD cable will work !
Should be one on the passenger side also.
@@locksny thank you good sir ! Your vid’s are great !
Great Video! good to know!
👍👍👍 keep up the good work excellent job
Thanks 👍
It's surprising the places they put those things. 👍
Yeah ! A bit out of hand at times.
Great Stuff. Like You Always Say Someday I'll Be A locksmith. I Think You Already Are. Thank You As Always !
I'm determined to get to locksmith status one of these days 😉
The instructions on the AutoProPad did NOT indicate pressing the "LOCK" Button at ANY time. Read the instructions BEFORE you start the process. You got LUCKY this time!
I guess you missed where I said "Oops" ✌
Love these videos! Funny how Chrysler/Dodge/Jeep hides the star connector in different places depending on the model. How do you find these locations?
Lots of searching 😁
@@locksny LOL! And here I thought you were going to dazzle me with some brilliant program or something that points you in the right direction!! 🤣
EXCELLENT!
Thanks !
2020 Chrysler Pacifica etc. How do you unlock a used key fob?
Send it out.
ADC 2011a cable where did you purchase it?
Any auto locksmith wholesaler will have them.
Does this programming activate all the features of the fob, or just the door open/close?
It activates all of features the van has, if it was equipped with them.
I was stuck in mountains and then someone came and do the same.
Locks and unlocks but car only starts with pushing the start/stop button with the fob. Not without it. It says Key Fob not detected. What could be the reason?
Key wasn't unlocked properly.
what do you mean? Thought we were unlocked and then we were able to get on our way back to home@@locksny
@syedrizvi7813 It sounds like a refurbished key. If you have to tap the button to start the van, the key was not unlocked properly. You shouldn't have to tap the button with prox to start your van.
oh I see. So the programming was done incorrectly or incomplete@@locksny this was expensive
@syedrizvi7813 The key that whoever bought to program in your van was unlocked incorrectly. It was obviously a refurbished key, not brand new OEM.
Using APP just a choice of chance, or im508 take longer?
Last one I did I had no comms with the IM508 so I just used the ProPad.
Great information. Thank you! #LOCKSNY
Thanks for watching!
Did you use oem key?
I always try to use OEM.
Does this work with a Chrysler Pacifica 2019?
Yes
Is it the same with the autel? Thanks.
Yep.
Come on Jay we need a new video
🤓👍
👍🤓
In other words. We c!an't do it!