Suspension UPGRADE ! UDI 1/16 Scale RC Car.
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2021
- This video mainly focuses on the upgraded Oil filled coil over suspension available for the SG 1603 RTR 1/16 2.4G 4WD. The upgrade does fit both brushed and brushless models. you can purchase a set here for around $16
usa.banggood.com/4PCS-SG-1603...
The banggood 1603 drift truck has become very popular in the RC community. I purchased the brushless version a few months back. I also recently purchased the brushed model. These trucks are great little machines for the price.
Get your own SG 1603 drift truck!!!
Click the link below.
Code:OuterzoneRC save 5% OFF for all rc cars
shop.makerfire.com/products/s...
4PCS SG 1603 1/16 RC Car Traxxas Hydraulic Shock Absorber Damper 1603-BZ01 Vehicles Model Spare Parts
RC drift car Traxxas slash rally banggood Baron 1603 1604 SG traxxas GTR shocks coilovers best bang for buck RC car Cheap fun
![[HIGHLIGHT] หมีLIVEปะ? | EP.171 เห็นแต่ในจอ วันนี้มาต้องขอคารวะ](http://i.ytimg.com/vi/gPWLxa0e_Z8/mqdefault.jpg)
Give the man's a good discount code for the next thing he wants for that bangin pun well deserved
That performance is awesome and a great value! Really appreciate you showing these. I agree, get both.
Thanks Gary for always leaving positive comments haha.
Awesome video bro, nice shocks, great upgrade, good job 😀👍💪
Get a set they work really nice!
Thx for the link, i had the same ans that do Cool, More FLOW and Smooth ! 👌🙂🔥🔥
Yeah man no problem, shocks are awesome, big difference.
Bella modifica...molto utile ...l'ho fatta anch'io...bel video ... ciao dall'Italia
I was looking for this. I just tried one of these micro trucks and it's way too bouncy. Thanks for the video. Subscribed.
Thank you sir. They work great!
Again great video.
If there is a oring in them you can also get some team associated green slime and put that in it.
Very informative video. I wish I saw this before getting the brushless. I've been having a hard time controlling it, so now I drift on the second speed setting. The oil shocks made a world of difference too.
I may get a second brushed version too :)
Yea get a brushed one and dont look back and use the brushless one with the street tires, it's really fun as a speed runner because it's so small. You will be so glad you got the brushed one and if you get the better Zee batteries the brushed one is even more controlled. Again brushed is no comparison in drift!!!
@Outer zone RC I too went with the brushed version and after buying a second brushed (eachine eat15) , I decided to risk it and plugged in a 3s lipo. They actually take it just fine! I've ran them for around 10min at a time. Motor gets hoter with rubber tires vs drift. Also the eat15 brushed comes with a heatsink that very useful on 3s lipo.
Very nice you helped me a lot, i will buy them. I have the Amewi LR16 brushed model and i hate the spring shocks i feel i have a toy rc. The Amewi never replied to me if they have oil shocks for this model and after i saw your video you covered me. That's why we need people like you to make videos and help others that don't know what to do. Now you know a way to make this chassis to steer a bit more ? It's difficult i think because is not so hobby grade, but i wanted to see, if it's possible to make it steer a bit tighter. Thanks again for your help.
Thank you very much.
Glad to help!
I put these on my modified brushless 1604. Completely agree, it made a world of difference in handling.
Yes sir!
This truck is so famous
Great bang for buck!
Do they make metal spur for this ? Wanting to loosen up the front diff and lock the rear
Cool vid! Does the shocks comes already oil filled? Newbie here!
Hi i have ordered an ud1604 and will arrive nxt month. I am also planning to upgrade the shocks and is 53mm suspension suitable for this
What tool do you use to get the suspension off??
Great video, could I please have some more info on the brushed car’s battery you mentioned? What mAh are they and do they run on the original esc? Cheers
You do need to change the connector on either your esc or the new battery. A hobby shop will typically solder one on for like $5
Here is the Battery link below, works fine with stock electronics :
Check this out on Amazon
Zeee 7.4V 60C 1500mAh 2S RC Lipo Battery with Deans Plug for FPV Drone Quadcopter Helicopter Airplane RC Boat RC Car RC Models(2 Pack) www.amazon.com/dp/B07TV4KBKV/ref=cm_sw_r_awdo_GMJKA8QK236XGCS2KJCF
@@outerzonerc777 thanks!!! I didn’t know you could use a 2s lipo battery on a brushed esc setup! I thought lipo’s were only for brushless setups?? Guessing the run time is about 20mins on a lipo?
I did that. Drifting. Round and round and my head spun to the ground
What is the modèle for the suspensions? Because i'm beginner and this week i want to change for something Smooth..🙏👍 Thx for your help and Chanel ! Amewi is mine, for the Panthère model. 🙂🤝
This should be a good link to the shocks. Thanks for your support!
usa-m.banggood.com/4PCS-SG-1603-1-or-16-RC-Car-Upgraded-Hudraulic-Shock-Absorber-Damper-1603-BZ01-Vehicles-Model-Spare-Parts-p-1882705.html?cur_warehouse=CN&rmmds=search
@@outerzonerc777 thx so much ! 🙏🙂
do u recommend the brushless one for drifting? i saw in reviews that people say its glitchy at slower speeds. was the drifting in the end done with the brushless one?
Do not get the brushless one for drifting, it's terrible for drifting. Very glitchy. Go look on my page there is a brushless vs brushed video one a brushed motor upgrade that will answer your questions. If your looking for a controllable drift car go brushed. Then get zee 1500 mah 2s batteries if you want a little more power. Ultimately you want to build it like the one in the middle of the upgraded motor video I made. It's about as far as the brushless but excellent throttle control. The new motor is a dynamite 25t 380 size motor. But I would just start with stock brushed and enjoy then get a battery, after a while, you will need more power when you get better, that's when you get the dynamite 25t brushed motor. To make a brushless motor smooth for drifting you need a sensor motor and I have not had much luck finding a 380mm brushless sensored motor, unfortunately.
@@outerzonerc777 thanks for the detailed response! i ended up going with the HBX 2188A to drift around the office with, its a bit smaller and way fast enough for indoors, i might pick up the SG 1603 later to just rip outside, it looks like a ton of fun for places like skateparks, but like u said i might end up going with a brushed version and upgrade it myself as a hobby project.
Can i use RGT62100 shock?
Bagaimana cara melepas suspensi original nya?
Can i have a question was it normal if my brushed ver/ have a sparking motor?
Should be ok if not smoking. The contacts can make a small spark.
I've put this shox on my SG1604! Great Shox! But now my Car is higher than before with the original shoxs! It lookx now like a monster truck LOL What I'm doing wrong?
Might be how your mount them, there are 2 mounting points, one of the points will keep the truck lower. Also, you can adjust the height of the shocks on the shock sleeve.
Can u show me how it looks with the higher suspension? I'm trying to make it a off-road rally car!!!!
@@Ramon-bd1ii If you buy the red once on ali or banggood he looks higher than original.. 5mm higher I think
@@outerzonerc777 What rly.. I don't where.. hmm I didn't found the second mount
@@stkobii will it perform better with the higher suspension?
Dmna kah beli shockbreaker nya ?
The udi shocks I bought for this drift car off ebay was crap fit didn't let chassis sit level they were ment to be udi shocks but rear was 68 mm so I sent them back for refund.. And changed them as I rather big bore shock look.... so I drilled and fitted 1/10 scale ball studs and yeah racing shock gear 50mm shocks they fit perfect and handle loads better than them littly toy udi shocks 👍👍👍
There are 2 different size sets, unfortunately you got the wrong ones. There is a 1603 set and a 1604 set. My buddy got the tall set and yes it handled like poop. You can't really find the shorts anywhere anymore. I bought 3 sets, still one in package if I ever have issues.
Yeah ones I was sold were crap a guy on ebay selling them saying there proper ones with photos of them fitted to udi breaker truck.. but there wrong ones for sure he's selling..... he should be kicked of ebay lol... Either the tamiya trf 50mm or yeah racing shock gear will work awesome with abit of drilling for ball studs carnt beat big bore look 😉👍👍
@@stevenoram5139 I want to see pics.
@@stevenoram5139 I really like them on my drift truck because the softer the spring the more grip you get to handle with. Feels like they are built for dift truck, slammed and stock oil is awesome. On my brushless one, it does seem a bit sketchy. Needs a bit of running, taller ride height, heavier oil.
No height adjustment for the oil shock? Is there any Ring shock included
You can adjust the shocks. The whole treaded part you see is adjustment like on a normal automotive coil-over. I just have mine slammed at the top.
@@outerzonerc777 do we need to buy extra tower shock ? or use the stock one is Well Fit already? mine is Sg1603 brushed
@@micikho1 hello, you use the original shock tower.
What battery’s are you running in them?
Zeee 2s 1500 mah. Perfect fit. Great punch. Last a long time too
Which zee lipo are u using please
These are the batteries:
Look at this on eBay
www.ebay.com/itm/2PCS-Zeee-2S-7-4V-1500mAh-60C-Lipo-Battery-Deans-for-RC-Car-Truck-Airplane-Boat-/383205406858?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
You will need to solder this on also. Or use solder heat shrink connector.
www.amainhobbies.com/align-jst-male-connector-agne11169a/p235242
Can it fit on udirc 1601?
Hey sorry just saw this. I believe they do fit. About 95% sure. I don't see why they would re-engineer the whole chassis if everything else is the same.
Hi, where did you get the wheels for your SG?
They are the stock ones and I cut up a yellow fox racing sticker and put stripes on the wheels.
What type of oil grade did you use for the shock?
It comes filled with oil, but if you needed to refill seems like traxxas 30wt would work
@@outerzonerc777 thanks
Where did you get the toolkit mate?
Hey do you mean the Plano tackle box?
What wheels are them thanks
They are just the stock ones that come on the truck. I just cut some Fox racing stickers up and put the yellow on. When your drifting they look really cool. They have a yellow tint to them.
@@outerzonerc777 ok thanks
@@stekeel6993 No problem, hit me up with any other questions, happy to help!
Get a pair of shock pliers, I can’t stand watching you scratch those shocks.