Absolutely fascinating content. As a modern Ford truck owner, I so enjoy seeing these forerunners of my beloved F-350. I look forward to your future episodes.
Actually, it's amazing how great a design the A was and still is.I can only assume that in today's world, there's not one vehicle produced that can last the way our beloved A 's have.Get out there and run your A's and enjoy the response from all the folks. THX KEN BE SAFE AND ENJOY!
Hi Ken , great video! Thanks for the AA technical info! My friend told me of a 1930 Express,131" w.b. in a barn free for the taking, back in 1985. I stored it a few years, but had to sell it. The 195-A, one of my all time favorite trucks!! The stars aligned and I found a 29' Phaeton! Another all time favorite? Thanks for your videos!!
Mint brotjer my dad would have loved this he started driving at 12 in worcester ma. He drove trucks just like yours boy the stories. Im likein your site thank you.
Can you do a video on the forgotten Model B and BB trucks? I have a 1934 157 inch wheelbase BB truck that came from Great Falls MT. It was used until 1963 when the engine broke. It was left sitting in the field until 4 years ago. Replaced the engine with a similar flathead V8. It now runs and drives again with most of the original parts still on it including the brakes.
Good day from Ontario. Boy interesting video on ford trucks. Odd putting extra low gear for little motor. Getting up to speed , but then holding it there. Thanks
Ken, I received you thanks and announcement, of the reach of the 1000 figure! Well, you deserve it as you have worked and brought us ROP notch presentations and we here on the island of curaçao, we my wife and I each presentation is a good one, man you did and are doing your best! Congratulations and we will go for more ok? Hope sincerely to meet you one day as I like to go a car show of MAFCA which I am member of. A big hung from us all and we depend on you for more TH-cam footages. Sincerely, The Jacobs
Hi Rick. I believe he is subscribed to my channel based on previous comments he has made so I would presume that if he wants something, he would reach out. Thanks for asking!
Low (granny) gear in an AA is a lower ratio not a higher ratio plus there is an add-on under drive - direct drive unit that was available to create a low range or all speeds in the main trans. I had two of them before selling one to a guy in Utah.
Absolutely fascinating content.
As a modern Ford truck owner, I so enjoy seeing these forerunners of my beloved F-350.
I look forward to your future episodes.
Glad you enjoyed it
Great video!!! I love the assorted pictures and your explanation about the trucks.
Thanks 👍
Great video nice pictures like your explaining along the way lots of work for a 40 horse engine 🇺🇸🤔
Hi and welcome to the channel. Thanks for visiting!
Actually, it's amazing how great a design the A was and still is.I can only assume that in today's world, there's not one vehicle produced that can last the way our beloved A 's have.Get out there and run your A's and enjoy the response from all the folks. THX KEN BE SAFE AND ENJOY!
Hi Dean. Like you, I saw trucks I never even knew existed and still powered by that beloved 4 cylinder. Truly an amazing motor and vehicle!
You to Ken be blessed and be informed the content of todays YT video was so interesting. Really enjoyed it! Have a good week end. Myron
Thanks Myron and you do the same!
Thank you for this amazing video. Great information for the Model A/AA Lover.
Hi and welcome to the channel! Thanks for your comment!
My first car when I was 14 was a 1928 model A
VERY COOL VIDEO!!!
Hi Dano and welcome to the channel! Glad you enjoyed it!
Really a great and informative video
Hi Aaron and welcome to the channel! Thanks for your comment!
Enjoy video! Mike from Missouri
Hi Mike! Glad you enjoyed it!
Hi Ken , great video! Thanks for the AA technical info! My friend told me of a 1930 Express,131" w.b. in a barn free for the taking, back in 1985. I stored it a few years, but had to sell it. The 195-A, one of my all time favorite trucks!! The stars aligned and I found a 29' Phaeton! Another all time favorite? Thanks for your videos!!
Hi Mark and welcome to the channel. Sounds like you hit the jackpot! Thanks for sharing!
Mint brotjer my dad would have loved this he started driving at 12 in worcester ma. He drove trucks just like yours boy the stories. Im likein your site thank you.
Hi Michael and welcome to the channel! Thanks so much for your comment!
Can you do a video on the forgotten Model B and BB trucks? I have a 1934 157 inch wheelbase BB truck that came from Great Falls MT. It was used until 1963 when the engine broke. It was left sitting in the field until 4 years ago. Replaced the engine with a similar flathead V8. It now runs and drives again with most of the original parts still on it including the brakes.
That is a great idea! I will see what I can do!
Good day from Ontario. Boy interesting video on ford trucks. Odd putting extra low gear for little motor. Getting up
to speed , but then holding it there. Thanks
Hi and welcome to the channel. Thanks so much for your comment!
Ken, I received you thanks and announcement, of the reach of the 1000 figure!
Well, you deserve it as you have worked and brought us ROP notch presentations and we here on the island of curaçao, we my wife and I each presentation is a good one, man you did and are doing your best!
Congratulations and we will go for more ok? Hope sincerely to meet you one day as I like to go a car show of MAFCA which I am member of.
A big hung from us all and we depend on you for more TH-cam footages.
Sincerely,
The Jacobs
Hi Myron and thanks so much for your kind words and support!
Great shots. Do the photos have descriptions of who's in the photos? I'd love to send some to the mafca webmaster.
Hi Rick. I believe he is subscribed to my channel based on previous comments he has made so I would presume that if he wants something, he would reach out. Thanks for asking!
Low (granny) gear in an AA is a lower ratio not a higher ratio plus there is an add-on under drive - direct drive unit that was available to create a low range or all speeds in the main trans. I had two of them before selling one to a guy in Utah.
Thanks for sharing and for watching!
2:31 only slightly over loaded, 😮.
7:56 looks like a starting shaft for the air plane engine, interesting .
Hi and welcome to the channel. Thanks for your comments!
Be fun to take an old AA Ford cross country.......down to Rt. 66, head to Santa Monica........
Oh yeah it sure would be fun!
Furgon largo sin duales atras ,mi preferido 🎥👏
Hi and welcome to the channel. Thanks so much for your comment!
I love the big panel trucks but it seems every one has disappeared. I never seen one in real life nor in any youtube.
I never have seen one either. Perhaps they are in museums but all I ever see are flat bed or stake beds. Thanks for watching!
Soviet MiG 3 at 7:55.
Hi and welcome to the channel! Yes, you are correct. Thanks for your comment!
Obrigado. O terceiro eixo só surgiu aqui no Brasil na década de 60. Sou habilitado desde 1958. Parabéns.
Hi and welcome to the channel!
I got a get one of these
Hi Timothy and welcome to the channel! Yes, you need one!
I'd take a clapped out AA over a new King Ranch any day
Hi Jeffrey and welcome to the channel! Me too!
Look at That! Doolies and Double Doolies. I have never seen That
Hi and welcome to the channel! You got to love those Doolies!