Not sure if its fast enough to really send it, but it was cool! (really possible the belt was slipping from being wet or the torque converter clutch needs different springs or something seems to really sound like a lot of slipping somewhere)...
Wish I knew what kind of kart this is. I have this identical one waiting for my 16 hp duromax to come in.But there are no markings of I'd on it left. Would love to know what kind of kart I actually have lol.
I had one of those drive clutches come off and the weights flew apart right under my leg. It blew the cover right off of it and they still flew 20 feet. It was violent. Luckily nothing hit me they are dangerous. I never run without a cover. Plus as you could tell they dont like to get wet
Fix the toork converter and really good video can’t wait to see the 420 go through it it would do it 😂 good luck with the cold weather and stay safe😁😄😀
Lift the motor up higher to keep the belts try. Run a chain & sprocket from what is currently your driveshaft to a new one. Massive sprocket. No speed, but it will crawl for days
I have an idea instead of trying to break it you can give this to the people who can't get it. like me I've been trying to get one for the longest but they get really expensive.
You obviously have never owned a winch. Either that or you don't properly wrap the cable back up every time after you use the winch. If you take care of your winch so it will work when you REALLY need it, you will wrap it back up perfectly every time. Plus you have to clean the cable out to keep it in good shape. It is much easier for a lightweight vehicle like this to just use a small tow strap, which if he truly offroads he should have had one instead of that tiny rope. I have a 12k winch, but I mainly use my 10 Ton tow straps to pull out trucks and SUVs, but I have a 5,000 lb smaller strap with hooks on the end to hook on to small cars and cross overs that do not have tow points. Only time the winch comes out is if I am stuck or someone else is stuck REALLY BAD.
That freakin truck on bags is sick as hell. Love the channel keep it up
My highlight as well lol!
once i saw the truck i was like yuppp SUBSCRIBED! lol
That truck is bad ass!
O ya
Yay i kinda was expecting an OFF-roading episode on the OFF-road go kart
Gonna need a snorkel kit and converter cover to keep the belt dry so it don't slip alot and change to a lower gearing and it will do just fine
Spray some tack spray on your belt will keep it gripping in water. Kinda like rubber cement spray but much much thinner and water proof
Not sure if its fast enough to really send it, but it was cool! (really possible the belt was slipping from being wet or the torque converter clutch needs different springs or something seems to really sound like a lot of slipping somewhere)...
its get wet because they not install the cover of the conveter
That truck is so convenient
I’d like to see you guys build a dragster to compete with Carsonandcameras! 😎😂👀👏👍
I no
It just the gear rasio and no torque converter cover
Wow that thing is slow! But that c10 is sweeeet
Steve'sSpee
F***off
Too slow and low...
Came for the kart. Stayed for the c10.
Get a bigger sproket on the axle too much acceleration not enough room for the toqure converter to actually work
That c10 is so dope.
Seems like it could use some gearing to the torque side
your vids are sweet man keep it up and ill keep watchin!!
Dang that thing is slow as heck but both the trucks nd the Jeep were nice 👍🏼
Change TAV red spring for a Yellow Comet spring. Use the tightest hole when you put it back together. It will climb hills better.
10 seconds in and already love this vid
Add a cover to your torque converter keep er dry good to go
Love the truck but not a fan on the airbags
Love your channel you will be big one day
Danny Bath thx bro
once again awesome vid,keep up the good work!
sick xj man
Wish I knew what kind of kart this is. I have this identical one waiting for my 16 hp duromax to come in.But there are no markings of I'd on it left. Would love to know what kind of kart I actually have lol.
It's a fire fox 620
You guy are the Best
I had one of those drive clutches come off and the weights flew apart right under my leg. It blew the cover right off of it and they still flew 20 feet. It was violent. Luckily nothing hit me they are dangerous. I never run without a cover. Plus as you could tell they dont like to get wet
Awesome
Fix the toork converter and really good video can’t wait to see the 420 go through it it would do it 😂 good luck with the cold weather and stay safe😁😄😀
Corey Reynolds toork
I have that same go kart with a 420cc and it’s Awsome!!!
Is that home made or did you buy it online and put stuff onto it
sup guys you should look into a 301cc preadator it would be alotmore faster?
How many go karts do you guys have theirs so many I can't count
def should have installed the torque converter cover.. u got that belt so wet it doesnt wanna do anything....
looked fun getting that wiplash though
Put the air filter up higher because you don’t want to get water into your engine
keep the videos coming drive though water more often lol
can we see a crawler kart build
go kart approved rope 😂😂😂
It sounds like it has more bark than bite...LOL...
Hahahaaha
This is what I wanna see!!!
You can't get the torque converter wet it will slip really badly
How much is it and where can I find it?
If the belt gets wet it’ll slip if your gonna off road it put a clutch on it so the water doesn’t effect it
Which is faster a predator 212cc or lifan 110cc
Can someone post how to install throttle cable
How many cc does it have
Haha it’s funny that you said I can hear the Valve Leaking it’s ok we’ll replace the tire
u guys should just do a race cart like full send kart
Should I get a go kart for my 115 acres? Because id love to have one but I want it to make it if I'm paying so much for it
Talentless Cult making a high quality one can cost a lot too. My advice is find a frame for 50-100 dollars and build it from there
What is the go-kart called
Lift the motor up higher to keep the belts try. Run a chain & sprocket from what is currently your driveshaft to a new one. Massive sprocket. No speed, but it will crawl for days
Hi
badass c10
Cute truck
What are those and that c10 tho 👌
It would of done better if the belt had a cover to keep it dry
Thats a sick fucking bagged truck u got there
Take the governor out of the motor will be faster a little and get rid of the dumb torque converter and get a disk clutch way better and won't slip
If you’re just gonna break I️t give I️t to me instead
Mat The dipper good idea
No me
no kidding
You rock
I like your car
Thumbs up for the c10
Nice ass truck
Hey B.B.R. i just got one of these tomberlin firefox carts too
The video is in my channel
Seems very underpowered
Not underpowered, the gearing is just really low.
belt is slipping. tires weren't spinning most of the time. blue smoke at the 6 minute mark.
Torque converter doesn't like the water why would u drive it through there
Your tire was low in last video aswell :D
I have an idea instead of trying to break it you can give this to the people who can't get it. like me I've been trying to get one for the longest but they get really expensive.
Nobody is just going to give you a go kart you have to earn it and work for it like everyone else
How much did you pay for that
Honestly that go kart looks like a Jeep the way the roll cage is made
Like if u agree
tordue converter can't wet it will slip bad
wildcat2488 I no he should have a cover on it
I want those tires
Please my dad never wants to help me he alway s getting drunk
There is no torque converter
2:37
Put a 670cc on the gokart
Belts dont like water or mud. Yank that garbage converter off and straight chain it with a metal converter for chain
You might need a 670cc
Why would you want to break the m
What a shame that you would take that TOMBERLIN and destroy it.
They try to break there go kart while mine breaks after air molecules touch it to hard
Torque converter belts and water don't mix well.
But things aren't even torquey doesnt even has any power what is that like a freaking five horse
Water on the belt
Has a winch on his jeep ties a rope and pulls it out using the engine instead
You obviously have never owned a winch. Either that or you don't properly wrap the cable back up every time after you use the winch. If you take care of your winch so it will work when you REALLY need it, you will wrap it back up perfectly every time. Plus you have to clean the cable out to keep it in good shape. It is much easier for a lightweight vehicle like this to just use a small tow strap, which if he truly offroads he should have had one instead of that tiny rope. I have a 12k winch, but I mainly use my 10 Ton tow straps to pull out trucks and SUVs, but I have a 5,000 lb smaller strap with hooks on the end to hook on to small cars and cross overs that do not have tow points. Only time the winch comes out is if I am stuck or someone else is stuck REALLY BAD.
Put a 420 on it
Needs more power. Too slow
That thing has no power at all
Cool,but that's slow as hell lol
Yx 140 engine swap
Your axle is bent
Lol get a gopowersports.com torque converter thats what these videos are telling me lol cheap or any ebay torque converters are trash....
A really big frame not fakr
lol 5mph top speed before wet
Дай схему каркаса
That truck is so rat rod
Its not slow he did that because he wanted to i have one its faster then 10000 moter dirt bike
Rotary lol
The gear is to small on the axel put a bigger one go up about 15 teeth
80th like !!!