Thanks you for this video, I have a problem when I can start the socket "cannot assign the requested address jvm_bind", I tried with many ports but could not solve it.
I believe this link will be helpful. A String has a header with two bytes, then the following are Char data after the header. support.industry.siemens.com/cs/document/42002283/how-do-you-compensate-for-the-string-mismatch-caused-by-the-rcv_ptp-and-send_ptp-blocks-?dti=0&lc=en-US
While Doing This LCom Library Under config. _ instTcon 80c5 and 7003 error
Great video, Very useful. Thanks.
Glad you enjoyed it!
Thanks sir i learned a lot of things from you ❤
It's my pleasure
Great!!!💪💪
could you make a tutorial also for telegram notifications using the LHTTP library?
Vielen Dank, mein Guter 🤗
Thanks! Welcome!
Thank you a lot for this video.
Thanks and Welcome!
Simulation can possible with 1214>4. Firmware and to solve the Error 7003 and 8600
Thanks you for this video, I have a problem when I can start the socket "cannot assign the requested address jvm_bind", I tried with many ports but could not solve it.
Maybe use another laptop. It looks like your OS is rejecting the socket software. Also turn off the firewall.
very good learning video
Thank you 🤗
Great..
Thanks!
if I have to send a string command to a device: e.g. FTUNE[CR] ..... Is there a way by modifying something or adding?😃😃
I believe this link will be helpful. A String has a header with two bytes, then the following are Char data after the header. support.industry.siemens.com/cs/document/42002283/how-do-you-compensate-for-the-string-mismatch-caused-by-the-rcv_ptp-and-send_ptp-blocks-?dti=0&lc=en-US
A logical and clear explanation.... Thanks so much 🙂
Thanks very much!