Great work! These bearings are not officially serviceable but the method you demonstrated here seems to work just fine. I think it would be even better to fill the space between seal and the plastic protector with vaseline, too, to avoid having any space for water to stay for prolonged periods.
Thanks good video, now finally I understand what to do. Your grease was brown before the repacking which means water intrusion. What I can’t understand is how with 2 seals water gets in there. I have the same problem, with a Dura Ace BB.
Use an old toothbrush to apply grease. It’s sometimes less messy and I easier to apply it exactly where you want it. And don’t forget to grease the crank arm keeper screws while you’re at it.
ang ideya ko lang idol, since hindi nabaklas yun mismong bearing, dapat nilagyan mo ng oil, engine oil para medyo malapot kasi hindi talaga magpenetrate fully ang grease dun sa other side ng bearing.
ano po problema ng bike ko sa tuwing nakalagay siya sa bike stand tapos pinepedal ko at bibitawan eh sumasama sa pag ikot ang crank ko.. may problema ba sa bottom bracket pag ganyan? shimano bottom bracket gamit ko ngayon..
@@r0ckfus10n Gasoline is probably the cheapest high performance degreaser you can get but products specifically designed for degreasing might be nicer to use. If you use gasoline, I would recommended using gloves that prevent getting gasoline to your hands because gasoline is pretty bad for your skin (it degreases your skin too!).
Salamat sa magandang video mo idol, new subscriber here🙂 Yung saken idol, nung tinanggal ko ang crank, sumama yung sealed bearing sa crank. Sira na kaya yung BB ko?
@@protambike7258 Why hightemp grease? I think using a grease that blocks water is much more important for this location. Marine Grease seems like a good idea. Basically look for a bearing grease designed for boat trailers that are regularly submerged into salt water and that should be the grease you should be using.
Best bottom bracket service video on TH-cam even though I can’t understand it I still know what to do now haha 👍
Nice
same here, I have no club what he saying but the video is good enough hahaha Thanks
@@luigirs3 The langauge is Tagalog/Filipino fyi.. but yeah the vid is simple yet precise, u got all u need to service your bb.
Great work! These bearings are not officially serviceable but the method you demonstrated here seems to work just fine. I think it would be even better to fill the space between seal and the plastic protector with vaseline, too, to avoid having any space for water to stay for prolonged periods.
Simple, pero direct to the point, kaya di nakakainip panoorin
Thanks good video, now finally I understand what to do. Your grease was brown before the repacking which means water intrusion. What I can’t understand is how with 2 seals water gets in there. I have the same problem, with a Dura Ace BB.
He mentioned that he rode his bike through flood water that's why he decided to do a repack
Use an old toothbrush to apply grease. It’s sometimes less messy and I easier to apply it exactly where you want it. And don’t forget to grease the crank arm keeper screws while you’re at it.
A regular Calvin Jones! Outstanding video and just what I needed.
ang ideya ko lang idol, since hindi nabaklas yun mismong bearing, dapat nilagyan mo ng oil, engine oil para medyo malapot kasi hindi talaga magpenetrate fully ang grease dun sa other side ng bearing.
Anong engine oil?
Excellent job and great lesson for me. Thanks.
Very informative, direct to the point. Salamat sa pagshare idol.
Ride safe!
I love this video skillful hand perfectly. add) 09:18 softly tighten bolt as like stem Top Bolt. Too Tighten cause? energy LOSS.
Can’t thank you enough, you made things so simple, thank you so much!!
6:51 this bird is laughing at you, mate. :D this video also helped me a lot!
nice video.
the best part is the animals doing noises on the background lol
thank you
Salamat dito idol, very helpful sa mga katulad kong nagtitipid 😅
Salamat ng marami, sir. Malaking tulong ang video mo.
Maraming maraming salamat, sir.
Salamat sa video dagdag kaalaman namin😀
Wow ngayon ko lang nakita etong ibang channel nya. Sana makapag upload pa kayo ng ganito
napansin ko agad now lang ako na padaan sa channel na to my ka boses moto phil is that you hehe
Nice one Bosing, gas ata pwede na din diba para wag masyado matapang.
Ok idol may idea nko kng paano magbaklas ng seald bearing ng bike ko maingay narin
good job.. i'll give you 10 for that bearing repack..
Kea pla familiar..c motophil pla tlga to hehe lodi tlga kala q sa motor lng pati dn sa bike nice2
Excellent Demo. Good job!
Thank you.
Ngayon ko lang nakita motophil may bike channel ka din pala, all around galing. Hahaha
Hindi po ba nabubuksan ang old shimano bottom bracket
lods hindi ba nahuhulog yong bulitas
Wala na ata yung parang lock ring bago yung pedal mo lods
Hoy pare 2 taon na san na bagong video mo hoy
Pwede ba yunh shimano bb51 sa ixf crank?
lakimg tulong nito sir sana gawa kapa mga vids
good day ikaw ba si glynne dunca ng moto phil?
Dimo kami maloloko motophil haha, description lng siya to 1000000% po haha
ano po problema ng bike ko sa tuwing nakalagay siya sa bike stand tapos pinepedal ko at bibitawan eh sumasama sa pag ikot ang crank ko.. may problema ba sa bottom bracket pag ganyan? shimano bottom bracket gamit ko ngayon..
grease brand?
Pwede po ba ang paint thinner i pang linis idol?
Eto kaya sulusyon para sa malagitik na bb?
Salamat sa video. Napaka informative. Ask ko lang kung may nabibili bang plastic cover ng BB Sir?
Boss next vedio upgrade naman sa 1× crank ty
di po ba makunat ipadyak un race king?
Kasya po ba yung ginamit mo na bb tool sa road bike na hollowtech 2 lods?
Ui soy bikers din pala! 💪
Boss skin din Po Kasi natunog pag pinapadyakan .. Anu Po Kaya pwdi Kung gawin boss tnung lng Po pahelp po
ehh lods paano po kapag umaalog yung crank arm repak paden po bayon?
ano po brand ng Shimano bottom bracket mopo?
Upload kana motophil
Idol tanung ko lang paano pagkakalagay mo ng spacer sa bb.2 sa right at 1 sa left.gnon b akabit
What is the green liquid you use to clean the old grease?
gasoline
@@r0ckfus10n Gasoline is probably the cheapest high performance degreaser you can get but products specifically designed for degreasing might be nicer to use. If you use gasoline, I would recommended using gloves that prevent getting gasoline to your hands because gasoline is pretty bad for your skin (it degreases your skin too!).
Soy sana magkaupload ulit dito
Idol may bike video kana pala .... Hehe
Motophil po ba to? Kaboses hehehe tska parang same location
parang si motophil. kaw ba yan? yung background at boses pati yung grease na ginamit parang motophil.
Idol pwedi bayang bottom bracket na yan sa roadbike?
Pwede yan idol hollowtech bottom bracket basta hollowtech din po yung gagamiting crank hehe ride safee
sir advice nmn po , gusto n mag shield bearing sa butterfly n bike size ng bottom braket q 9/16 same parin ba po sa shield bearing ty po..
Salamat dito ser. Ride safe.
Sir hindi ba mhirap tangalin Yung tire
Mo.ako sir nhirapan ganyan tire ko din.
Kapampangan ka idol?
anong gasolina yan idol?
Pwede po ba paint thinner?
hindi mo na nilagay boss yung parang plastic sa gitna ng bb?
Maraming salamat sa guide 😎
Ano gamit mong camera boss???
Boss Motophil ikaw ba yan?
moto phil i thai look mo yan blue yung rims silver spokes tapos naka pang cyclocross na gulong haha✌
Boss gawa ka sa hub repack
Boss mgkno yung mga gnyan grasa?
Salamat sa magandang video mo idol, new subscriber here🙂
Yung saken idol, nung tinanggal ko ang crank, sumama yung sealed bearing sa crank. Sira na kaya yung BB ko?
Lods ok lang po ba di tanggalin yung bb? Wala kasi akong pang tanggal di pa naka bili ng tools?
Nagbibike kadin pala idol?
Shout out motophil kahit pala sa bike matatagpuan kita 😅
Excellent job! 👍👍👍
Ano hubs mo sir
Bakit po sinasabi ng iba na pangit daw grasahan ang bottom bracket kasi tumutigaw daw
After how many kilómeters is it adviceable to do the regrease?
Me about 6 months if you use it everyday
Ps. Please use hightemp grease
@@protambike7258 why? Cycling does not generate as much heat as motor vehicles
@@sepg5084 I use marine grease and it does great.
@@protambike7258 Why hightemp grease? I think using a grease that blocks water is much more important for this location. Marine Grease seems like a good idea. Basically look for a bearing grease designed for boat trailers that are regularly submerged into salt water and that should be the grease you should be using.
Salamat Idol ❤️❤️❤️ Auto Subscribe
Ikaw ba yung nag ba vlog fin about sa motor boss?
Sir ikaw ba si MotoPhil?
Lodi yung sakin sa may drive side yung bearing hindi na naikot. Malinis naman pero hindi umiikot. Any tips lodi?
Idol may tumutunog sa bottom bracket parang daga na umiiyak ehh pls po pano puyon balak kupo erepack dipo ba masisira yun
Ano crnkset mo? At ilang teeth?
Moto phil?
Mga boss anu magandang grease sa brearing ng bb.synthetic na blue o ung kulay green na grease.O kulay dilaw.
what kind of language is this? i hear lots of spanish words.
Tagalo. Filipinas.
@@ollekgspd thanks, yeah, i have since learned a bit about tegalo and the historical spanish influence. thanks!
Sir san mo nabili bottom bracket remover mo? Salamat po.
Nicee! Sa bike ka din pala
Pare anu gamit mo na hubs?
Idol motophil is this youuuuu?🥺
Lods,Ano bearing code nyan sa bearing sa bb?
Punto yang kapampangan i parekoy
pwede po ba kahit brown na grease? thanks po
It would do
Thank you for informations.
Boss ano po gamit nyong hub?
Nagutla ako nung pag imik mo soy hahaha.. Basta may gulong yata kaya mo eehh
Pabati po
actually nakakabili ka ng sealed bearing lang. 75 pesos lng isa nun bro.
Kuya pwede pa yung digreaser pang tagal ng grasa sa bottom bracket den po wala po kase akong gas
goods yan
big thanks 👉❤️👈
Anong grasa po ang gamit nyo?
pwidi pa din kya ipaayus ung bb KO...biglang may lagatok kc
Nag bibike ka din pala
Pareho tau sir moto phil may hilig s motor at bisiklita
Motophil???