ok, sure. please subscribe our channel for the notification s of all upcoming videos, and do not forget to push the bell icon button, it provides the instant upload information notification directly to you.
We have to use the flame to transmitters for the hazardous place according to the requirement there are various types of ratings available for this and I will try to make a video on this topic
Relay se temporary holding hote hue bhi pump chalu rahega to relay ki supply cut hote hi pump band nahi hota. Please explain the wiring. & How to off the pump
Aisa hota hai ki Jab holding Yahan Se Ek Bar Ho Jaati Hai Railway se to Uske bad electrical panel Mein contactor Laga hota hai vah holder Jata permanently to Hamari Jile off hone ke bad bhi vah hold rahti hai Jiski vajah se per chalta rahata hai
Hello Sir, Is that Pre Fab cable and Elco board cable same ??? Because both are using for communication between I/O module and I/O barriers... Also sometimes TBs are also called as I/O barriers or is there any difference??
Thank you for the appreciation and do not forget to share the videos with other so that we can also take benefit from others and other can also take benefit from our knowledge so thank you
Sir aam ko mene age bhi puchha tha Plzz ek baar bata do PC me se channel find kese karte he ? Yocogawava dcs me Node slot se chennl kese dudhe plzzz sir plzzz
First, open system view application in Engineering PC of Yokogawa. At left side all nodes and it's io cards show with the channel. Can easily find out the channel.
If you are going to explain everything in Hindi, then please, write the video description in Hindi as well. If the description is in English, then please, explain everything in English. One of them please.
Good explained,i have a doubt, how i will convert 4 wire vibration sensor to 2 wire system in dcs, please explain practically in dcs with diagram plz, its a request
Mai aapka vedio dekh kar dhanya ho jata hoo. Thanks
Thanks for the appreciation. Please share the video to your social media platforms.
Yes sir you're correct yokogawa provide redundancy in each and every panel.
I'm working in Yokogawa.
Thanks, please share.
Excellent contents, Please continue doing these videos they are really informative.
Thanks, we keep doing and providing such videos regularly, please share with others.
Very well explained sir. Please make a vedio on ABB DCS also.
Thanks, please share with others
Excellent sir... Very nice voice and brief
Thanks, please share with others
Thank you for Good videos.plese send video about PID tuning all parameter s in DCS.
ok, sure. please subscribe our channel for the notification s of all upcoming videos, and do not forget to push the bell icon button, it provides the instant upload information notification directly to you.
Very good easy and breif explaination sir thank you. Your video is amazing 🖒👌
Thanks for admiring the video, please stay with us, and share the video with others also.
@@ElectricalAndautomation_guru sure
Nicely explain sir👌
Keep watching
Thanks sir
Explanation very good but please sir speed thoda km hoga to aur jyada understand ho jayega.
Ok, I will make sure about it, speed remains in understandable limits.
Sir, very well explanation..pls upload DCS from plc tag via communication video will be very helpful..😇 thanks
Sure.
Great explanation sir!🙏
Thanks please share with others
Sir Please explain about configuration LFCS PPCS KFCS PFCS
Controller is connected with ethernet cable then to switches ?
Please make a video on Yokogawa DCS programming..!
Ok
Please explain redundancy wiring kese karte he usake upr video banao
Ok sure, stay connected with us. Please share video with others.
v net switch k through kitane signal ek sath ja sakte h
Unlimited, there is no capacity of this communication protocol, it is just like an ethernet connection.
Sir plc me kisi PT ki value kaha se change karte ya fixed karte h
Ok
Bunker Level ka video bnayiye full knowledge KM krischelmorse ke bare me
good job sir very nice
Thanks, please share with others.
Sir make a video on motor VFD connection in dcs practically
Ok, I will try.
Very good explain sir, please make seperate video on vibration probe.
Ok, sure. It will take time but we make it!
please make a video on MODBUS communication
yeah, sure. do not forget to subscribe our channel for upcoming videos.
How to make logic for flow transmitter in yokogawa centum cs 3000
Ok
Sir kisi bhi parameter ka trend kase assign karte yokogawa DCS me pl help
Ok.
Sir DO me ralay holding kaise karte hai ?
Holding voltage given by DCS
Can you provide pdf sir the complete wiring in dcs with field instruments ... operation... And troubleshooting in dcs and plc ...
isme alco board kyu nhi lgaya and also barrier
Sir hazardous industry may hame instrumentation side kya Precaution leni chahiye ye?
We have to use the flame to transmitters for the hazardous place according to the requirement there are various types of ratings available for this and I will try to make a video on this topic
Thank you sir
Sir flowmeter our yakagowa vp centem how can connect flowmeter output 4-20MA connect sink or source connection please help us
Ok
All components of dcs or plc pe video banaiye
Already made
Thanks and please explain about switch, network cabinet
Sure. Please share this video to others.
very good.....,..if possible plz make a video on auma actuator motorized valve....in details
Ok, I will make sure
i m waiting....
Sir instrument ka dcs se commissioning and decommissioning ka video bna do bahut jruri h
Sir please explain 4 configurations PPCS, KFCS, LFCS
Ok, I will try to make a video on that. Please do not forget to share the video with others.
Plz make video on this topic sir
DCS ke programming me out put chang Karna do me do ko Chang Karna programming or rimot par keshe Lete he
Ok, I will.make video on that
Very well explained, I got a question.. in the control box i have seen we earth 24 vdc and 120 vac in one place is that wrong?
Not acceptable at all, dc and ac searching should isolate to each other at any level
Great explain sir
Thanks, please share with others
Please make video on hvac fields operate by plc.
Ok, I will try.
Relay se temporary holding hote hue bhi pump chalu rahega to relay ki supply cut hote hi pump band nahi hota.
Please explain the wiring.
&
How to off the pump
Aisa hota hai ki Jab holding Yahan Se Ek Bar Ho Jaati Hai Railway se to Uske bad electrical panel Mein contactor Laga hota hai vah holder Jata permanently to Hamari Jile off hone ke bad bhi vah hold rahti hai Jiski vajah se per chalta rahata hai
@@ElectricalAndautomation_guru thank you so much
I am your old channel subscriber
Thanks please subscribe and share our channel
Sir Asphalt Plant pe b video bna o
Please explain yokogawa vnet and configuration
Ok sure
Sir io list open in scada system plz explain
Ok
Sir ye cpu card ko hi controller bolte hai kya
Thanks, if you like the video the video , do not forget to like the video and subcribe channel. if you ahave alredy done, please ignore this!
Sir, What is full form of YBNM??
Sir opocity monitor par video banaiye
Ok
Thanks sir,
Please make a video on abb dcs 800 drive commissioning & Schneider electric plc
Ok sure
Motor ko dcs aur plc card se kaise connection karte hai
Aur kaise plc se control karte hai
I already made an video for that, please see
Pls make a video on DCS programming of ABB.
Ok.sure.
Sir another video upload to explain node, slot,and channel
Ok
Modbus profibus pe banaye plz
Sir plz sugar baging machine ke baare me video bnayen
Ok, sure.
Hello Sir,
Is that Pre Fab cable and Elco board cable same ??? Because both are using for communication between I/O module and I/O barriers...
Also sometimes TBs are also called as I/O barriers or is there any difference??
Yes , prefab cable is same in both cases.
TBs can be called as i/o barriers because it will as protection for i/o
Ye switch kya hai
What is the earthing value of panel and card earthing
It voltage should less then 1 V
Barmang ka video banaiye sir
Ok
Good job
Thanks
Emerson deltav or ovation system
Ok
Please explain DI,DO,AI AO FIM
Okay
What is full form of ybnm system in panel?
ok
What is an Elco board?
it is used for the termination of field cable . to isolate the field from the syatem.
Thanks a lot
Thanks. Please share with others.
Nice 👍
Thanks bhai
Thank u sir 👍😊
Thank you for the appreciation and do not forget to share the videos with other so that we can also take benefit from others and other can also take benefit from our knowledge so thank you
Sir yokogawa ka system architecture bato na
ok
yokogawa ka software bhi dikhana bhai
Ok
Jsw steel hai ( sir caster ka dcs system ka bare mai banaiye
Ok.i will try.
Please process industrial automation project besic details
Ok.
Where is vfd plc connection video
Will upload shortly
Sir aam ko mene age bhi puchha tha
Plzz ek baar bata do
PC me se channel find kese karte he ?
Yocogawava dcs me
Node slot se chennl kese dudhe plzzz sir plzzz
First, open system view application in Engineering PC of Yokogawa.
At left side all nodes and it's io cards show with the channel. Can easily find out the channel.
@@ElectricalAndautomation_guru thankyou for reply but app uska video bana sakte te jyada thik se me samjpata.. Chalo koi bat nahi thankyou for that.
I will make a video on that, but you have to wait for sometime.
सर लाइनर पोलिश मशीन की वायरिंग सिकावो
Ok
please make videos in english .. indians can understand it too
Ok, sure.
ER bus or ESB bus?
ER bus
Sir Kuch banana sikhaiye
For example in DCS ?
Все понятно, спасибо брат, извини что не на английском, я его не понимаю
I can understand, you can't understand our language., I hope someday, I will make avideosin English!
@@ElectricalAndautomation_guru гуд лак
.Pleas sir J.B ka Wiring batao na Instrument wala E.S.P Rediation .Echanoviser J.B Wiring 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Ok sure
Thanks🙏 sir
All the best
Panel on karne liye koun koun si earthing dekhte hai
Power and system earth
If you are going to explain everything in Hindi, then please, write the video description in Hindi as well. If the description is in English, then please, explain everything in English. One of them please.
Ok
@ElectricalAndautomation_guru HI friend! Is it possible to make the same video in English? I would appreciate!
Good explained,i have a doubt, how i will convert 4 wire vibration sensor to 2 wire system in dcs, please explain practically in dcs with diagram plz, its a request
I m working on ABB dcs
Ok sure.
Thank u sir
So nice of you
Pls simens make dcs explain pls
Ok, I will try.
❤❤
Thanks
You are too fast , slow down my friend, I can’t breath ...
Bro, take the oxygen cylinder instead.
Please tell slowly
Thanks, if you like the video the video , do not forget to like the video and subcribe channel. if you ahave alredy done, please ignore this!
all comments in english but video on hindi ///little strange
It is a co- incident
please speake english man in your video for more view