ABB DCS AC 800M distributed control system Explained in Hindi | Electrical & Automation

ABB AC 800M for Advant Master DCS, a modular DCS process controller in several CPU modules from low cost, medium power to high-power and full redundancy.
AC 800M is a modular process controller with a rich set of communication functions as well as full redundancy and support for a large range of I/O systems. Several fully compatible CPU modules vary in terms of processing power, memory size, and redundancy support - from low-cost, medium power to high-power, full redundancy.
Rail-mounted modules comprise CPUs, communication modules, power supply modules and accessories. Connectivity and expansion options make AC 800M exceptionally open and scalable; easy to connect and easy to adapt according to current control needs.
CPU and Control Network Redundancy
The AC 800M CPUs can be configured for CPU hardware redundancy. Here, two CPU
modules will run in parallel, one as primary and the other as secondary. If the primary CPU fails, the secondary CPU automatically takes over.
Network redundancy is based on the ABB RNRP (Redundant Network Routing Protocol). This protocol is designed for rapid detection of network failure and instant switching to alternative
paths. Network redundancy requires two independent IP networks, one primary and one secondary. Whenever the maximum number of lost messages is exceeded, the traffic switches to the secondary network.
Powerful control solutions and reusable libraries
AC 800M supports logical, mathematical and time-based data processing. The functionality range for control applications is wide, from binary control to closed loop control, with advanced functions like auto-tuning and adaptive PIDs, fuzzy control, etc.
Predefined process objects like motor objects, valve objects, etc. are available. It is possible to build user-defined function blocks and hide their content to protect intellectual

[@Gaurav-121]

thankyou for making this video .recently i joined an automation company . isilye aapki video bhht kaam ki hai mere liye ,,,,now i am your new subscriber.

[@ElectricalAndautomation_guru]

Thanks, keep watching and share in the technical groups

[@c.a.chauhan1494]

You give very best information sir. I am instrumentation and control engineering student. So your information is very helpful for me
Thank you sir...

[@ElectricalAndautomation_guru]

Thanks, please share with others.
Help us to grow

[@4uhacks767]

Bhai apne Electrical engineering diploma Kiya hai kya ?

[@samsadshola4969]

Bahoot achhe se explain kiya hai aapne... Thanks

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@kalpalatapurohit9022]

Very Good. Nicely explained so that a beginner can easily understand it. Thank U so much

[@ElectricalAndautomation_guru]

Thanks for the appreciation! Please share with others.

[@KK-Manju]

I am a ABB DCS Engineer since 5 years and working in Bengaluru. Please make a video on Engineering Work place and Operator Workplace, Alarms and Events, OPC server for AC 800M Etc, so that beginners can easily get an idea about what does ABB DCS Mean and how important it is in the current automation market. Please make and introduce a videos to society. Part wise videos and all should related to ABB 800xA only, Because people may not get confused.

[@ElectricalAndautomation_guru]

Sure.

[@mohamedeljabri4970]

How can I configure ci801 until get all signals from field devices you should know I have profibus dp

[@VSO-ek1bp9vm5k]

Sir please explain me , in ABB difference between pm 891, pm892, pm862 ???
Difference between ci854,ci853,ci867,ci840,ci801???
Plz explain me dp 820 card ???

[@siddusiddu6266]

Hi sir

[@ak_patel86]

Sir how to download ABB SCADA. Plz help me🙏🙏

[@abhaymandalekar1388]

Thank you sir create explain, good job

[@ElectricalAndautomation_guru]

Welcome, please share with others.

[@aluri.kirankumar4304]

Thank you for sharing words
Most of the people need first explain Architecture of DCS and Then Hardware totally ....please do it one video

[@ElectricalAndautomation_guru]

Ok, will tell anything, like this, will make like as you said.

[@arshadimam9966]

Very good appreciate your way and dedication for explanation.... Thank You.

[@ElectricalAndautomation_guru]

Thanks., please share with others

[@tejashpatel9929]

Very good information about Dcs panel.

[@ElectricalAndautomation_guru]

Thank you, please subscribe to our channel and do not forget to share with others. If you already subscribe to our channel then thank you for doing so.

[@jithinpc2561]

Very good explanation sir , more videos please regarding ABB DCS

[@ElectricalAndautomation_guru]

Ok, sure.

[@simanchalparichha331]

Thank you sir, you doing great work

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@JohnSmith-wb2lq]

Great explanation.... Pls upload more videos...

[@ElectricalAndautomation_guru]

Thank you, I will

[@gajendrachauhan7579]

Nice information sir. I am waiting for next video.

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@RameshKumar-jr8kq]

Supr information

[@ElectricalAndautomation_guru]

Thank you.

[@bhaveshparab4812]

Thank You Sir, really appreciate for your efforts.

[@ElectricalAndautomation_guru]

Welcome

[@sudhakaryadav4395]

Thank you sir. Waiting for next video.🙏

[@ElectricalAndautomation_guru]

Thanks. Sure

[@anandtanty3498]

Thank you very much Sir

[@ElectricalAndautomation_guru]

Thank you!

[@srijansrivastava2670]

Good video ,🙏

[@ElectricalAndautomation_guru]

Thanks, please share with others

[@talalkhalid269]

Bro really nice video! Thanks for the help!!

[@ElectricalAndautomation_guru]

My, please, please share with others

[@farhatabbas1084]

Sir Aapka training center kaha hai & aapse kese contact kre

[@Raosaaaahab]

This is 👌👌👌

[@ElectricalAndautomation_guru]

Thanks, and please share with others

[@rajkumarsandaveni2327]

Waiting for Next video...

[@ElectricalAndautomation_guru]

Coming soon

[@mohsinraza9944]

Good job

[@sunilrajbhar7894]

Very nice Sir

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@adverankursaxena8734]

Sir Thanku for information

[@ElectricalAndautomation_guru]

Welcome

[@arabindaanand4158]

Thank you 🙏

[@ElectricalAndautomation_guru]

Thank you, please share with others.

[@arabindaanand4158]

@@ElectricalAndautomation_guru Sure sir. Please make more videos on Industrial Instrumentation and automation 🙏

[@prakashmohanta5909]

Excellent

[@ElectricalAndautomation_guru]

Thank you, please share with others.

[@MyPurushu]

Very good

[@ElectricalAndautomation_guru]

Thanks

[@aadarshagupta8930]

Thank you so much

[@ElectricalAndautomation_guru]

Welcome, please share with others, and do not forget to subscribe to the channel

[@atishnarharshettiwar4452]

Or esa hi video DCs ka bhi banaiye

[@ElectricalAndautomation_guru]

Ok

[@rajanbhatt5633]

Waiting for part 2, sir!
And whats experiences of AI, AO, DI and DO sensors that u told??
🙂🙏

[@ElectricalAndautomation_guru]

Thanks, please share with others.

[@yogeshasutkar9245]

thankyou for sharing

[@ElectricalAndautomation_guru]

Welcome please do not forget to share with others

[@yogeshasutkar9245]

@@ElectricalAndautomation_guru yes 👍🏻👍🏻👍🏻

[@saolindaya]

Very helpful

[@ElectricalAndautomation_guru]

Thank you. Please share with each other.

[@sohailmajeed9922]

Sir agr profibus Ka relay module replace Karna ho to plz bata dany

[@ElectricalAndautomation_guru]

Ok

[@atishnarharshettiwar4452]

Sir aapne jo abb DCs and plc ka video dala hai vo bhot knowledge ble hai but is video me plc ke sab components ko pannel me na show karte hue allag se 1 table me rakhake usse 1 motor,transmeter etc chalake dikhate to jada achhese samaj aata.... please esa video banaiye or uska notification hamko jarur bheje

[@ElectricalAndautomation_guru]

Ok, I will try to do that, if possible!

[@The18yards]

Super

[@ElectricalAndautomation_guru]

Thanks brother for your kind feedback I request you to share this video with your other groups so that we can expand our ideas also

[@gagan7311]

Good.need to know programming part.

[@ElectricalAndautomation_guru]

Ok, will.uplod shortly.

[@wellingtonpazmino58]

Hi, Do you have any information How to implement redundancy in AC800M?

[@ElectricalAndautomation_guru]

Hmm

[@binodadhikari8546]

Plz sir make video power house control video relay breaker etc

[@ElectricalAndautomation_guru]

ok, thanks, please don not forget to subscribe our channel and don to forget to share with your friends in social media platforms.

[@jaysondkar5368]

Sir jo switch hai wo manageable hai ya unmanageable switch hai?

[@ElectricalAndautomation_guru]

Process networking Mein Ham Sare Jo Hain and manageable switch use karte hain manageable sirf switch vahan use karte hain Jahan per internet networking yah bahut hi classified networking ki jarurat padati hai

[@jaysondkar5368]

Thank you sir

[@automationguruji1399]

Kitni retandancey de rahe ho sir automation ka cost bad jaye ga aise me

[@ElectricalAndautomation_guru]

Safety bhi to increase Ho rahi hai

[@atishnarharshettiwar4452]

Thanks sir

[@ElectricalAndautomation_guru]

Welcome

[@yasserhaddou5393]

Please sir add substitle in english to your videos
Your tutro are rare pearl

[@ElectricalAndautomation_guru]

Thanks, I will try

[@jaysondkar5368]

Sir sarver and hoist system kay hota hai eske upper video baniye 🙏please.

[@ElectricalAndautomation_guru]

Ok, I will try to do that.

[@muhammaddawood6165]

Bhai dcs t distributor system hai t is mein aik controlr say hum pry plant k control kar sakty hain to ya or control qq

[@ElectricalAndautomation_guru]

Yes, we can do

[@jaysondkar5368]

Hello sir.
Sir may jab apperinticeship may tha tab hamaare eidher company may 4 plant thye.
Mager jo dcs operater tha wo 1 no plant se 4 no plant ko operat kartha thaa. but mera question hai ki kase wo ethernet cabling rahae thi hai jise hum 1no plant se 4 no plant ko operat kar sakthy hai?

[@ElectricalAndautomation_guru]

Yes

[@jaysondkar5368]

Sir RTU kay hota hai our kaha use hota hai uske barema please🙏 video baniye.

[@ElectricalAndautomation_guru]

Ok, I will try. 🙂

[@israrshah6179]

Rtu

[@HarshSharma-rr7vf]

PLEASE MAKE A VEDIO ON THE PROGRAMMING IN 800 XA.

[@ElectricalAndautomation_guru]

Ok sure

[@hasanraza1298]

Dear Sir
Kindly make practical video on Turbine protection and their interlocks please..

[@ElectricalAndautomation_guru]

ok, thanks, please don not forget to subscribe our channel and don to forget to share with your friends in social media platforms.

[@zaheerkhan4374]

Kindly share video for this controller Ac800 when Fault indication blinks

[@ElectricalAndautomation_guru]

Ok, I will try

[@anilgurav6071]

Sir please could you explain profibus connection between io modules and controller in single line diagram on paper

[@ElectricalAndautomation_guru]

Ok, I will try

[@israrshah6179]

Need info on RTU

[@Ram-sx5mv]

Field se i/O k bich kya kya lga rahta h second part video banao sr

[@ElectricalAndautomation_guru]

Ok, sure

[@ElectricalAndautomation_guru]

Please share with others

[@shekhaazmi4033]

Sir upload the next part asap

[@ElectricalAndautomation_guru]

As soon as possible

[@shubhamroy13]

Abb 800XA ki programing ka video to bnao sir ki AI AO k se assain karte he or parameter ki range k se change karte he motor ka logic k se banate he or motor ko auto me k se chelate he.

[@ElectricalAndautomation_guru]

ok, thanks, please don not forget to subscribe our channel and don to forget to share with your friends in social media platforms.

[@rajkumarsandaveni2327]

Make one video on Abb 800xa architecture only....

[@ElectricalAndautomation_guru]

sure!

[@mohamedeljabri4970]

How can I configure ci801 until get all signals from field devices you should know I have profibus dp

[@ElectricalAndautomation_guru]

Hmm

[@anandtanty3498]

prosacer panel pa ak video banaya sir.

[@ElectricalAndautomation_guru]

Ok

[@arshadimam9966]

Please give link of part2 video of which you are talking about in this video...

[@ElectricalAndautomation_guru]

Ok, it still needs to be upload, as soon as possible

[@bibhutibhusanbehera5160]

In there any communication between boiler DCS and TG DCS?

[@ElectricalAndautomation_guru]

Yes

[@jaysondkar5368]

Sir es system jo black cable hai TK 850 uska use kya hai ?

[@ElectricalAndautomation_guru]

As i said i the video this cable is used the connection of bus of both the controller back plane module to each other for communication.

[@jaysondkar5368]

Thanks sir

[@ElectricalAndautomation_guru]

Welcome, please share videos to your Facebook, whats up technical group

[@arunvishwakarma6812]

Sir make a video over turbine panel full details ...

[@ElectricalAndautomation_guru]

Ok sure

[@daddycool2800]

Sir ek video me DCS, Server & Engg stations ka communication kaise hota hai woh share kare plz.

[@ElectricalAndautomation_guru]

Ok sure.

[@hooshangalizadeh637]

how to find or set the secondary ip and use it in opc?

[@ElectricalAndautomation_guru]

will make video on this

[@vermaji3130]

Controller kharab hai ya sahi kaise check karein mere plant me controller kharab hai bataya gaya hai lekin hamara plc hai same card hai

[@ElectricalAndautomation_guru]

If it is cominication with your network, and coming on line. This is the way to check contriller at formost level

[@gangadhardas5622]

Sir PLC pura control panel one one component Kia Kia hai.vidio banao sir

[@ElectricalAndautomation_guru]

ok

[@anishzeriya6784]

Please upload Part 2 ASAP

[@ElectricalAndautomation_guru]

Ok, I will try.

[@tarunsaini5202]

Sir abb 800m plc mai power ki light on h but plc run mode mai nhi aa rhe h ..

[@ElectricalAndautomation_guru]

Reset it

[@arunvishwakarma6812]

Sir I m waiting for u r video ..sir aapke videos q nahi aa rahe hai

[@ElectricalAndautomation_guru]

Now, it's coming regularly Arun Bhai, thodi personal problems hai.

[@arunvishwakarma6812]

@@ElectricalAndautomation_guruok sir
Q ki sir mai yahi pray krta hu god se ki ye aapka channel hamesha chalte rahe and kbhi band na ho q ki jitna aapse logo ko sikhne milta utna kisi nahi milta and I pray to god that apki har problem solve ho jaye

[@ElectricalAndautomation_guru]

Thanks Bhai.

[@anandtanty3498]

Sir ak Rio panel pa video banaya please.

[@ElectricalAndautomation_guru]

Ok I will try.

[@owinookello9358]

good teacher but make videos in English please

[@ElectricalAndautomation_guru]

Ok. Thanks

[@alipasha8323]

Please add subtitle to your video if its possible...thanks

[@ElectricalAndautomation_guru]

Ok, I will try.

[@anandtanty3498]

Dcs ka circuit drawing ka ak video banaya Sir

[@ElectricalAndautomation_guru]

Ok, will do it

[@Prabhatkumar-et8qe]

Which type of cable used in controller ac800m redundancy

[@ElectricalAndautomation_guru]

A speciality designed by Abb, now other brand make this.

[@shubhamroy13]

Sir woodward governor 505 ki video bnao

[@ElectricalAndautomation_guru]

Ok, sure.

[@shubhamroy13]

@@ElectricalAndautomation_guru sir is me kya programming ki jati he or kese ki jati he plz discribe kijiye.

[@ElectricalAndautomation_guru]

Ok

[@zamizamin2411]

hi dear
could you please share the Profibus connecter details
order number/ model details?
Thanks

[@ElectricalAndautomation_guru]

Ok, will make details on that.

[@faizalraazy91]

Please keep your camera little bit stable

[@ElectricalAndautomation_guru]

OK

[@faizalraazy91]

​@@ElectricalAndautomation_guru 🙏

[@Prabhatkumar-et8qe]

Sir how many I/O are used in ac800m controller

[@ElectricalAndautomation_guru]

100000

[@asifakhtar4553]

Ye abb ka dcs ka model kaun sa hai

[@ElectricalAndautomation_guru]

800xa with pm 864 controller

[@asifakhtar4553]

Thank you sir,

[@satish_maru]

Sir How to check riddandancy for dcs

[@ElectricalAndautomation_guru]

By taking off the another pair

[@satish_maru]

Ok sir

[@INSTRUMENT_GYAN]

Sir logic kaise dekhe iske bar me bhi bato

[@ElectricalAndautomation_guru]

yeah, sure. do not forget to subscribe our channel for upcoming videos.

[@tayyabrashid2227]

I am Electrical engineer can I am become a Control and automation engineer?

[@ElectricalAndautomation_guru]

Yes

[@SaifUllah-df4hk]

Profibas DPand profibus PA videobanye

[@ElectricalAndautomation_guru]

Ok

[@mohammadparwez7660]

Bhai I.O ka full form kiya hota hai

[@ElectricalAndautomation_guru]

Input- output hota hai

[@wellingtonpazmino58]

Please, I need your support Do you know How to downgrade AC800m firmware? Could you help me with your comments?

[@ElectricalAndautomation_guru]

Hmm

[@luckybains4833]

Please one video,,how to use,fluker 705 loop calibrator,,,,,,miter,,,in scada

[@ElectricalAndautomation_guru]

Thanks, please share with others and don't forget to subscribe to the channel.

[@SajidHussain-ho8ou]

Sir DCS mean plz?

[@ElectricalAndautomation_guru]

Already tol

[@gangapandit5745]

HOW TO Man turbine 12.65 MW DCS OPRETIND

[@ElectricalAndautomation_guru]

Ok

[@bharatprajapati6532]

ABB 800M is a HI PLC😏

[@ElectricalAndautomation_guru]

That not true.

[@bharatprajapati6532]

@@ElectricalAndautomation_guru i am working with ABB since last 6 years

[@ElectricalAndautomation_guru]

Tell me one thing that, is server-client topology is found in plc

[@prabhashkumar1336]

DCS there are used in software

[@ElectricalAndautomation_guru]

Thanks, please share with others and don't forget to subscribe to the channel. I

[@rajeshjaiswal2268]

Sir dcs sikhna hai

[@ElectricalAndautomation_guru]

Ok

[@sabaawan9838]

Automation supply sir reply them rack controller plese back mee ans

[@ElectricalAndautomation_guru]

Ok wait

[@technicalsoheb7658]

Kha se bhai

[@ElectricalAndautomation_guru]

What?

[@technicalsoheb7658]

Kon si city se

[@ElectricalAndautomation_guru]

Reason?

[@jitubabusay2826]

Hmi kya hota hai?

[@ElectricalAndautomation_guru]

Human machine interface for display like computer.

[@rajasekar206]

Explain in English...

[@ElectricalAndautomation_guru]

Ok

[@narendrasonar8534]

English bolne wale videsh jaye🤨

[@ElectricalAndautomation_guru]

Ok

[@raheemsiddiqi3243]

Sir Phone nambar

[@ElectricalAndautomation_guru]

Please contact on mail

[@singhjd3038]

AMAR IF YOU CAN ADD ME TO YOUR TEAM FOR WORKING IN THIS CHANNEL.

[@ElectricalAndautomation_guru]

But why?

[@mohsinraza9944]

Good information

[@anandtanty3498]

Thank u very much sir

[@ElectricalAndautomation_guru]

Welcome, please share with others.