Very nice vid. I will replace copper with Pex, much easier, with on next projects. I have ceiling stain from slow leak. If I open drywall, I should leave it open and dry for 2 - 3 weeks? What if I don't open it, will I have mold?
Эти pinholes образуются от остатков флюса при пайке, он и вызывает внутреннюю коррозию приводящей в итоге к pinhole leaks. По мне так это не страшно. И не так типично, к тому же сейчас существую watersoluble флюсы. В тоже время PEX с его достоинствами (простота монтажа и гибкость) имеет недостатки, во-первых PEX фитинги суживают отверстие, уменьшая пропускную способность по сравнению с медной трубой минимум на 20%, если дом уже имеет изначально медную водяную проводку, которая также служит заземлительным контуром, то PEX вставки обрывают этот контур.
Как они пишут, зависит от воды. High levels of chlorine in the water supply Corrosion particles from rusted water heaters High pH levels in the water Other chemical factors in soil and water. Ржавчина, хлорка, жесткость воды.. Вообще этот дом впервые за 22 года такое вижу. Два раза тут пробивало трубу горизонтальную что идет от водонагревателя. Первую пробоину я заменил в Мае и поставил PEX. И вот вторая часть теперь пробилась. Первый раз - th-cam.com/video/P3xfd8IaVoI/w-d-xo.html Ну теперь вся она из PEX, надеюсь больше нигде по дому не пробьёт.
Was that the same house you fixed earlier? Also, I don't think that sharkbite coupler is for pex... It doesn't have any pex stiffener. It was meant for copper only.
You have to use something like this for PEX: www.homedepot.com/p/SharkBite-1-2-in-Brass-Push-to-Connect-Coupling-U008LFA/202270492 Notice the white plastic? Those are the pex stiffeners.
Yes that house was before. I was replace a piece of pipe from water heater. th-cam.com/video/P3xfd8IaVoI/w-d-xo.html Now was leak next part of this line. So i replace now a full horizontal line oh Hot water. I hope no more leak in a future. That push to connect fitting 3/4' x 3/4" Slip Repair Coupling Fit for all type of pipes. Works with Copper, CPVC and PEX tubing
@@FixitAll My friend, believe me.. Unfortunately, that is marketing material for all their products and is very confusing. Go here: www.homedepot.com/p/SharkBite-1-2-in-Brass-Push-to-Connect-Slip-Coupling-U3008LFA/202270515 Go down to Specifications and look at Compatible Pipe Material. You will see it says copper only. The one I sent you with the stiffeners will say Multipurpose.
@@FixitAll Also look at the Q&A... Someone asked if you can use it on PEX.. Sharkbite answered: "No, our slip fittings are only for use on copper or CPVC. If you have further questions, please contact Customer Service M-F, 8am-5pm at (877) 700-4242."
Ceiling repair here - th-cam.com/video/x1THdsran80/w-d-xo.html
You’re a talented dude… makes me want to take on a diy fix myself!
Thank you!
Great video, great music.
Glad you enjoyed it
Great job, please show the drywall fix.
Yes will do. After a couple weeks when ceiling dry out.
You can see repair here - th-cam.com/video/x1THdsran80/w-d-xo.html
Another great video
Yes yes yes I do the same I love your videos thank you 🙏🏻
Thank you!
Good job!! 🤠
Very nice vid. I will replace copper with Pex, much easier, with on next projects.
I have ceiling stain from slow leak. If I open drywall, I should leave it open and dry for 2 - 3 weeks?
What if I don't open it, will I have mold?
Correct, live it open, and better if you can put some small fan to get air circulation in the open ceiling hole.
How old is this house? I thought that copper should last 50 years.
About 40 y/old. Pipe condition depend from water condition and contamination.
Goooooooood job 👍🏼👍🏼👍🏼👍🏼
Thank you.
Hoe much does a job like this cost?
From $600 and more.
@@FixitAll thank you
How much would a repair like this cost?
300-400 just for plumbing.
What caused the pinholes?
I believe the water condition.
- "Sometimes this is caused by poor water quality, and could indicate the need for water treatment services".
Лайк!Кто занимается дорогим ремонтом - говорят что медные трубы на века.Теперь вижу что нет!
Эти pinholes образуются от остатков флюса при пайке, он и вызывает внутреннюю коррозию приводящей в итоге к pinhole leaks. По мне так это не страшно. И не так типично, к тому же сейчас существую watersoluble флюсы. В тоже время PEX с его достоинствами (простота монтажа и гибкость) имеет недостатки, во-первых PEX фитинги суживают отверстие, уменьшая пропускную способность по сравнению с медной трубой минимум на 20%, если дом уже имеет изначально медную водяную проводку, которая также служит заземлительным контуром, то PEX вставки обрывают этот контур.
Как они пишут, зависит от воды.
High levels of chlorine in the water supply
Corrosion particles from rusted water heaters
High pH levels in the water
Other chemical factors in soil and water.
Ржавчина, хлорка, жесткость воды..
Вообще этот дом впервые за 22 года такое вижу. Два раза тут пробивало трубу горизонтальную что идет от водонагревателя. Первую пробоину я заменил в Мае и поставил PEX. И вот вторая часть теперь пробилась. Первый раз - th-cam.com/video/P3xfd8IaVoI/w-d-xo.html
Ну теперь вся она из PEX, надеюсь больше нигде по дому не пробьёт.
@@BlahBlahManYeah Верно.
@@FixitAll не соглашусь, проволочка то зачем!? Вот она и послужит доп заземлением))) а от блуждающего тока не спасёт никакое заземление.
Was that the same house you fixed earlier? Also, I don't think that sharkbite coupler is for pex... It doesn't have any pex stiffener. It was meant for copper only.
You have to use something like this for PEX: www.homedepot.com/p/SharkBite-1-2-in-Brass-Push-to-Connect-Coupling-U008LFA/202270492
Notice the white plastic? Those are the pex stiffeners.
Yes that house was before. I was replace a piece of pipe from water heater. th-cam.com/video/P3xfd8IaVoI/w-d-xo.html
Now was leak next part of this line. So i replace now a full horizontal line oh Hot water. I hope no more leak in a future.
That push to connect fitting 3/4' x 3/4" Slip Repair Coupling Fit for all type of pipes.
Works with Copper, CPVC and PEX tubing
@@FixitAll My friend, believe me.. Unfortunately, that is marketing material for all their products and is very confusing. Go here: www.homedepot.com/p/SharkBite-1-2-in-Brass-Push-to-Connect-Slip-Coupling-U3008LFA/202270515
Go down to Specifications and look at Compatible Pipe Material. You will see it says copper only. The one I sent you with the stiffeners will say Multipurpose.
@@FixitAll Also look at the Q&A... Someone asked if you can use it on PEX.. Sharkbite answered: "No, our slip fittings are only for use on copper or CPVC. If you have further questions, please contact Customer Service M-F, 8am-5pm at (877) 700-4242."
@@apex007 Ну, время покажет.
Большое спасибо.
Lost me with the fake looking Sharkbite and also sanding the pipe. Cleaning is good, sanding is bad when it comes to Sharkbite type fittings.
Yes, that house was before in May 2018. I was replaced a piece of pipe from same water heater line. th-cam.com/video/P3xfd8IaVoI/w-d-xo.html
Медь и прогнила ? Я думал она вечная
Это первый дом за мою 22х летнюю деятельность с такой проблемой.
Nothing last forever. The end.
I’ll be freaking out if I see it. Ur so latent
Yeah, that's bad surprise.