LIBRA H1, H2, H3 Cabinet Hangers - Italiana Ferramenta

LIBRA is the innovative family of CABINET HANGERS and WALL PLATES especially conceived to satisfy all the customer's needs. The LIBRA hangers are to be installed behind the rear panel with the only small cover caps left visible inside the cabinet.
LIBRA is a very resistant and reliable solution as the zinc-coated steel body is sensibly thicker, and therefore stronger.
All the models within the LIBRA family feature an innovative ANTI-TURNOVER device which is covered by patent.
LIBRA cabinet hangers allow to adjust the cabinet vertically and horizontally. The 2 movements are 100% INDEPENDENT of each other and therefore make the adjustments much easier and more efficient.
The adjustment and the locking of the ANTI-TURNOVER bolt can be carried out from the inside of the cabinet by using a standard PZ2 screwdriver.
LIBRA H1 is the universal screw fixing cabinet hanger.
Capacity Loading 75 Kilos per piece in accordance with the regulation DIN 68840.
LIBRA H2 is the universal cabinet hanger 3 dowels + rotary lever.
Capacity Loading 75 Kilos per piece in accordance with the regulation DIN 68840.
LIBRA H3 is the left/right cabinet hanger with 3 semi-circular pins + pre-inserted screw for the top (if required).
Capacity Loading 70 Kilos per piece in accordance with the regulation DIN 68840.
Also featured in the LIBRA family are 5 types of wall plates and 1 type of wall bar made of very thick zinc-coated steel and hardened by punched impressions.Wall bars and wall plates feature oval holes which facilitate the correct positioning and give the possibility to carry out the horizontal adjustment. Placement of the holes for wall-fixation has been optimised to reduce the stress on the plates and on the plugs. Bars and plates are available either with 1 or 2 hanger fixing positions (backwards and forwards), to be used according to the thickness of tiles or other elements attached to the wall which protrude under the fixed wall plate, in order to enhance the in-depth adjustment range without affecting the stability and resistance of the system.
Plates are provided in pairs to be used for installing two cabinets next to eachother, or to be split in two pieces for installing single cabinets.
Bars can be cut to measure in any position and are superficially marked to easily spot the required measurement. Bars will be completely enclosed within the side panels of the cabinets (for cabinets width 450-600-750-900-1200-1500-1800). Along the bars, particular modular flattenings have been created to allow the hanging of nearby cabinets, reducing to the minimum the distance between the wall and the cabinet.

[@owenmullen4669]

Very Helpful Thank you

[@SEGA_DEV]

What is the music?
Yes it's very informative. And those hangers are realy very convinient.