Sharpen your Electric Razor Blades - DO NOT BUY NEW BLADES !!!
ฝัง
- เผยแพร่เมื่อ 2 พ.ย. 2024
- Showing how to sharpen the razor heads of your electric razor.
This way you do not have to purchase new expensive heads so often and save some money!
All you need is some metal polishing creme and a flat and even surface, e.g. a mirror.
It is very easy and can help save you a lot of $$$ over time!
Never knew this.
I had no polish or mirror but I had a wet stone small bick with a super smooth side.
What could be better than a shaping stone I thought. It worked great .
Hi, I found your video very enlightening. I have thought about the possiblity of sharpening my Norelco shavers cutting blades for years. I realized that I didn’t have any small mirrors ir even a piece of glass. I was in the process of working on and sharpening some of my pocket knive and had a though. I accomplished the sharpening by using my Arkansas sharpeniung stone. Just added some honing oil and it did the trick. Honing stones are exceptionally flat. It shaves much better now and I didn’t have to spend a dime. Thank you for the inspiration!
Hah, I was just like that too.
Replacement heads are expensive, what kind of world do we live in when buying a good sharpening stone costs the same as buying 2 sets of shaver blades?
if you use this method to help sharpen your cutter blades make sure that you keep them matched up with the guards that they came with. If you just jumble them up like what happened in the video you will find that it will take a few weeks to get a good shave because they are specially machined to fit each other.
Also works very well if you have a sheet of ordinary copy paper on a flat surface. Apply a little Flitz (or Mothers Mag & Aluminum Polish) to the paper, then using the same method with a finger moving the blade assembly around for about 1 minute for each blade...
Many, many thanks. Used your method and it worked brilliantly. Saved me £41 (46.50 euros). Have a great day MegaSafetyFirst
How many dollars?
@@ryantjoa : £41 is approx $54 US.
Thanks for show how to sharp the blades of my shaver , very helpful, “ now my question is , we’re can I buy the material (polish) to sharpen my blades) thanks for answer my question, also what is the specific name of thsty polish…………thanks again………….🙏
What proof do we have that this works? And does Diamond paste work better?
Thank you for the video-instructions. I was going to re-sharpen the blade but after I removed the blade from the housing, it turned out there's a lof of hair trapped in there. After removing it I can use it again. because the blade still feels sharp. I have remove the razor blade housing from the head before but did not try remove the the blade itself from the housing.
Very good video but it is advised by Norelco to keep the SAME blades and screens together for the BEST results and not mix them up like what it appears in your video. (I have this shaver in your video.)
Oooo didn’t know that! 🤔 thanks
Any smooth glass surface will work even a ceramic dinner plate etc
it will help and I will do it for the fun of it but be aware that the blades are 2 part blades and the other half is the nest ribs in which they sit. The whiskers go through and get sheared between the 2 blades. So sharpening the one sharpens like one single blade of a pair of scissors.
Ah I see... so should one buy these nest ribs and blades from Philips? Do they sell it or must one buy from aftermarket? Also, I've seen some putting diamond paste in between blades and head. Would that sharpen both then?
I watched another video that said to use diamond paste, what do you think about that or do you reccomend a specific polish. Replacement blades are crazy expensive, it's like printer ink only worse, to just throw away a razor and buy new because of the cost is crazy. Thanks, Mike
I’m wondering if brasso would work, I’ve got some of that from when I was in military
Fantastic video!!Thanks!
I'll try it. It would be good if it works because the replacement blades are very expensive. Add a little more and you can buy a new shaver. Not that I like replacing shavers. They cannot be recycled.
Does it scratch the mirror?
Hi if i shave daily, then how often do i need to sharpen the blade or change the head..philips 5000 series one
From Where I can buy the blade replacement once it damaged?
I am not getting proper source to buy blade replacement for aquatouch shaver.
Plz help..
Can you buy original blades
Thsank you so much!
Approximately how many times can I expect to polish (sharpen) my blades?
I am confident this process works as described but the question I am left with is how often can you do this before the blades are worn down too much and just need to be replaced? At some point they must be worn down but it is after 5, 10, 100 sharpenings?
Another question is do you rotate the baldes with or against the cutting angle in the sharpening paste. It is hard to describe the direction I am talking about but the blades rotate in one direction to shave. Would you rotate them in the paste in this same direction or the opposite? I would think the opposite because if you were sharpening a knife that is the direction you would do it as well.
Theoretically you could do it for many times, but you're only sharpening the rotating blades. You still need the shields of the razor that they sit within to be in good condition. So this limits the number of times you would probably want to use this technique. I have tried it twice and extended the life of my blades by about two years before just buying new. On the Norelco type shavers I have, the heads rotate anti clockwise. I used car polish, any type of thin cutting polish would do. For sharpening I have tried clockwise, anti clockwise, figure 8 orbits and even random. It didn't really matter too much they still came out noticeably sharper. Start with clockwise and see what results you get.
Pretty smart 🤓
Once the polish turns yellow do you have to use fresh for next head to be sharpened? Thanks
I always use fresh polish for each head.
Can Any Polish ??
CAN I use baking soda and water
How many times can the rotary blades be sharpened this way before they have to be replaced .
I did. this proceture 3 times so far. It still works for me.
Thanks very much . I will keep sharpening them .
How you get the retainer out of the shaverhead?
Should turn counter clockwise.
I akso found a way to sharpen is use a non glazed cup bottom with water
pl give the list of replacement shops in pune repairecentre for philips Norleco 5000 i have taken it in Canada Toranto
Sorry, I cannot help you there. I have. never been to Pune.
Can i use toothpaste instead of polisher?
That may be a good idea. I’ve never tried.
yes or jif cleaner or car cutting compound
Yes, but be sure it's a decay-preventive dentifrice reccommended by the American dental association.
@@brucedennison1817 LMAO!
@@brucedennison1817 😁😁😁😁
from where i get polish solution Flits
I'd check on Amazon.
So are you Polishing them or Sharpening them?
thank you
❤
very good video tnx
I don't understand how the metal polish sharpens the blades.
@TestChannelOne the polish is very, very fine abrasive paste. It's like when you're polishing metal from rusted or extremely dull you start with lower (rougher) and move to higher (finer) number grit abrasive sheets.
Every Vedio is showing maintain shaver blades. None showing how to sharpen trimmer blades attached to shaver.
Toothpaste works
E
Hey, wanna hear the worst sound in the world? 1:47
Bullshit, it doesnt work!!!!
For 5$ to 8$ you can buy new blades at Walmart and forgo all the hassle of finding the expensive polish ( 5 to 8 $) ruining the mirror- and making a mess. Doesn't make a lot of sense to me. Also blades need to go back where they were removed. Video was good though and I like.
Try $40
5 dollar blade at wal mart ? The wal marts on my area sell them for almost the same price as
A new shaver
Yeah , you don't know what you are talking about. a new set of rotary blades is almost the same price as a whole new electric razor. Next time post the link of these $5 blades, oh wait, there is no such thing.
$35 is a bargain price for genuine blades on the slightly higher end models. So even if you only use this method twice before finally ditching the blades you'll be saving $$$$. Makes plenty of sense. Also you need to learn a little bit about the Mohs scale, which measures scratch resistance. Glass and ceramics are harder materials than common metals. Definitely more so than your average steel razor blades. So polishing on a surface like this can't (and won't) mark it.
@@alexturko6212just use toothpaste. It works just as well.