Nope, I had 160k on it when I sold it no issues, it would sit slightly lower when it was cold in the morning though just due to the air molecules I'd hit off road height and it would go back up. Not as bad as some say. I enjoyed the air suspension for sure.
I had 35” tires on my Warlock. Stock 5 spoke aluminum wheels and 35x10.50x17 tires. Completely stock. No spacers. Fit with room to spare. Only downside is a matching spare won’t fit underneath. 285/75/17 or 34” tire is the largest that will fit underneath these trucks.
Warlocks don't have air suspension right? So definitely a different suspension setup. I could fit ATs easier than RTs for sure as well, with the Kenda Klever RT they had large side lugs that came close to the upper control arm.
I have a stock 16 Rebel with air suspension. Need a new set of tires and didn’t wanna add a lot of stuff to it. So I can get 35s just need spacers? Do you think 305/70/r17s would be better for not having to add anything?
Honestly yes, you can fit 35s but they will definitely impact gas mileage. If you go with a a 10.5 wide tire that would eliminate the need for spacers instead of the 12 wide tire. If you're not off roading it very often I'd just go up a size or 2. 35 by 12.5 are just the max. If you get a 35x10.5 or 305s that would work just fine but still make it look more aggressive.
@@rickymorales6130 no it shouldn't, it will definitely clear the upper control arm, you may just have a little bit of rubbing in the fender wells, though that wouldnt hurt anything.
Hello friend did you add longer studs ? Also will a wheel adapter be better ? Can't find those flat spacers bora and supreme only offer the wheel adapters/bigger spacers
Thanks for sharing this info.. I asked on the Facebook Rebel group and they were assholes! 👍🏻🙏🍻
BTW I have a blue 2018 Rebel with air ride suspension and I’ve got 58,267 miles on the tires so I’ll be getting tires soon
I have a 22 , im glad I saw this.💪👍😎
Have you had any trouble with the air suspension?
Nope, I had 160k on it when I sold it no issues, it would sit slightly lower when it was cold in the morning though just due to the air molecules I'd hit off road height and it would go back up. Not as bad as some say. I enjoyed the air suspension for sure.
@@dirtsailoroff-road5580 Thanks 👍
I had 35” tires on my Warlock. Stock 5 spoke aluminum wheels and 35x10.50x17 tires. Completely stock. No spacers. Fit with room to spare. Only downside is a matching spare won’t fit underneath. 285/75/17 or 34” tire is the largest that will fit underneath these trucks.
Warlocks don't have air suspension right? So definitely a different suspension setup. I could fit ATs easier than RTs for sure as well, with the Kenda Klever RT they had large side lugs that came close to the upper control arm.
I have a stock 16 Rebel with air suspension. Need a new set of tires and didn’t wanna add a lot of stuff to it. So I can get 35s just need spacers? Do you think 305/70/r17s would be better for not having to add anything?
Honestly yes, you can fit 35s but they will definitely impact gas mileage. If you go with a a 10.5 wide tire that would eliminate the need for spacers instead of the 12 wide tire. If you're not off roading it very often I'd just go up a size or 2. 35 by 12.5 are just the max. If you get a 35x10.5 or 305s that would work just fine but still make it look more aggressive.
will 1/2" spacer be OK? I assume the studs will still be long enough?
What type of sliders are those? Frame mounted or rocker panel
They are Dominator D6 steps from go rhino and they are mounted to the frame.
Did you get a matching size spare under the bed as well?
No I never did, never needed it honestly. I figured the inch and a half smaller would get me wherever I needed to go.
Thanks, great info but that background music is annoying AF....😒
Thanks for the tip. I'm not a pro TH-camr lol
I’m a vet too. Lol. I’m getting my 35s tomorrow on my 17 rebel keeping same stock rims no lift. Just 1.5 spacers.
Should work fine. Just make sure those spacers are a quality brand and torqued to spec. Good luck sir.
Will that affect air suspension
Hello friend so all I will need is spacers for the 35s to fit without rubbing ?
yes, but there will still be a bit of rubbing in entry exit mode, but at least it wont rub on the upper control arm.
Hello friend will it be an issue with 1/2 in spacers since the 1/4 aren't available on the website? 😔
@@rickymorales6130 no it shouldn't, it will definitely clear the upper control arm, you may just have a little bit of rubbing in the fender wells, though that wouldnt hurt anything.
Hello friend did you add longer studs ? Also will a wheel adapter be better ? Can't find those flat spacers bora and supreme only offer the wheel adapters/bigger spacers
Did you have to change your wheel studs out?
No sir, the spacers I needed on the front were pretty thin so the studs definitely won't need changed.
@@dirtsailoroff-road5580 okay thank you I appreciate the info. I'm actually thinking about going 1/2 inch but I don't want to change the studs
👍👍❗(from "FB")