Chevrolet CEO after watching this: "Dear valued customers, we've just revolutionized your driving experience with our new polypropylene wheels. More cost-effective and lighter than ever"
In the US That white pipe is called Schedule 40, and it's a bit brittle. for a prop shaft, they would need the dark grey type, which is schedule 80 and far stronger.
hmmm there's potential about "Multi spoke" wheels. The fact that multiple tracks can adjust torsion independently of one another, allowing each track to find optimal grip. The pipe spokes are flexible allowing this effect. This is used already in springy recovery ropes - they being springy is magic of how they work better than just chain.
Hey guys what about using the same material to make an exhaust or for radiator hose? Would be interesting to see how long it would last considering how long those wheels lasted!
i enjoy these videos as they try new things pushing the envelope and being different . id like to see spring pistons maybe double the springs and weld then better lol . just to see how it would work
I wonder if there might be a way to use the round surfaces of the pipe to be the tread of the tire? Or perhaps even go the other way and have the ends of the pipes forming the tread? It would certainly be a very different sort of radial!!!! Those would have better grip, but the key would be to secure the pipes to something solid. It would have to be on a monster scale--but who would be crazy enough to do THAT? Hmmmm. 🤔
Hey guys i love watching your videos ,love the content now i ha e a question coud you weld two strait 8 engines together and see if it would run that would be awesome Thanks guys
When your Lada comes witha pretty good lathe to make its tires round again :) Should have tried to drift with them ( like those japanese kei car drifters do with their palstic rims around the tires for less cheap grip).
Imagine you flattened the sides and glued them together. Then filled the tubes with no open Ts with resign. Once rounded right diameter glued on tire tread. Then test them vs police spike strips. For the ultimate get away car. Or wrap the spike strip around the axel.
Yeah I said that too, Polypropylene tubular car chassis! 👍 Then Sheets of the stuff to make the panels, these tubular things as all four wheels... The list is endless! Hahaha
I used to make my bike wheels indestructible with pool noodles cutting them in half and placing them on the inside of the tyre outside of the innertube never a single puncture other idea is pure rubber tyres like with my BMX at 5 years old those tyres I literally cut stabbed etc they're probably still intact a little extra bounce however you could fix that with suspension if applied to a car obviously
Do the same thing you did with 3 in the hub, except somehow wrap the outside of the pipe with carbon fiber, and fill the inside with some kind of really durable material like flex seal, or maybe molten rubber? Then top it all off by spraying multiple layers of rhino lining material and/or flex seal on the outside, possibly some metal wire wrapped around the inside as a "radial" You can get some real life out of those pipes!
Those work better than I ever thought they would.
Right? Haha I bet PVC don't look like that 🤣
They really held up well! Who woulda thought
Chevrolet CEO after watching this: "Dear valued customers, we've just revolutionized your driving experience with our new polypropylene wheels. More cost-effective and lighter than ever"
@@skorpius2029 still better than the shitty spare wheel they give you
I was surprised as well!
I see someone has never worked with PVC pipe. And that's a pretty light car.
The same material can be bought in sheets. Buy sheets, cut circles and make tires. It should work and last longer because it will be a solid material.
Cut long sheets, install around tires, go drifting!
Cut notches for the treads and Wala, DIY offroad wheels.
Very impressed! I would love to see you make the Lada into a hovercraft.
The burnout was killer
Great set of wheels, do a winter snow / ice version that have studs / bolts on the corner sections.
These look like they would be wonderful for offroad use. How long would they last before they get stuck in deep mud?
Do a build where you combine all the crazy things you have tried that work well.
Like install their centrifugal clutch on the car they cut in half, with all the see through engine parts? That would be fun to watch lol
I would love to see you make drift Wheels out of five of them
Pipe and the home made hub was rather impressive. Good show.
still better than a peugeot
Hey only place a Peugeot is any good is on Gran Turismo the 206 rally car was badass ❤
EW12 Peugeot Engine is pretty badass.
@@acuraintegra101 only 205 and 405 rallye cars were awesome.
@@bitkarekbarly related to the street cars 😅
Wrapping rope through the spokes over the rim would remove the bumpiness ??
Make a prop shaft out of that pipe. Might last for a while.
In the US That white pipe is called Schedule 40, and it's a bit brittle. for a prop shaft, they would need the dark grey type, which is schedule 80 and far stronger.
Schedule 80 is white also. The grey is either non pressure drainage or electrical conduit
2:28, that's some phenomenal background music.
hmmm there's potential about "Multi spoke" wheels. The fact that multiple tracks can adjust torsion independently of one another, allowing each track to find optimal grip. The pipe spokes are flexible allowing this effect. This is used already in springy recovery ropes - they being springy is magic of how they work better than just chain.
8:26 the excited voice is legend
Would be cool trying those wheels on snow. 😊
If they had more sections, built out a bit, this would work very well I think.
Astonishing! You good men are never bored or lacking ideas.
Those worked 107% better than I thought they would! 😂
Y’all just keep coming up with new ideas! 👍🏻. From Oklahoma, USA.
Hey guys what about using the same material to make an exhaust or for radiator hose? Would be interesting to see how long it would last considering how long those wheels lasted!
i enjoy these videos as they try new things pushing the envelope and being different . id like to see spring pistons maybe double the springs and weld then better lol . just to see how it would work
So durable.. Didn't expect it to last that long
Not indestructible, but far tougher than I would have thought. Thanks for doing this so I didn't have to! Oh wait....
Idea what to do with a new set of this pipes: a camshaft and/or connecting rods :D
I think this experiment actually worked out really well for a change!
I wanna see a car made out of the pipes, similar to their log car video
Great content as always.
Crazy Ivan at it again...
I wonder if there might be a way to use the round surfaces of the pipe to be the tread of the tire? Or perhaps even go the other way and have the ends of the pipes forming the tread? It would certainly be a very different sort of radial!!!! Those would have better grip, but the key would be to secure the pipes to something solid. It would have to be on a monster scale--but who would be crazy enough to do THAT? Hmmmm. 🤔
I thought that they would bust apart before they left the garage..Amazing!
If you were to find a 24-inch diameter plastic water or sewer pipe, you could cut slices off them to make round wheels.
I think they already did that to make drift wheels. Except they deflated the tyres and crammed the pipe "rings" over them and reinflated.
Now that's what I call reinventing the wheel
8:04 that sorts out the fabrication imperfections.
Excellent snow tires!
Next time fill them with flex seal so that once the outside of the pipe is worn down, you have a rubbery substance to give better grip on the asphalt
this is content!!! what a breath of fresh air
Burnouts make EVERYTHING better!
Definitely didn't expect that!
This is schedule 40 type of pvc, You guys should try schedule 80 , it's much harder and tougher plastic
Would be interesting to see these perform in snow.
Hey guys i love watching your videos ,love the content now i ha e a question coud you weld two strait 8 engines together and see if it would run that would be awesome
Thanks guys
When your Lada comes witha pretty good lathe to make its tires round again :)
Should have tried to drift with them ( like those japanese kei car drifters do with their palstic rims around the tires for less cheap grip).
3:38 "The first few centimeters are always the most crucial..." - she 🤣
Best wheels yet.
Do the same thing up till the burnout, after it's round screw tire tread onto it making an airless tire!
Build a Lada out of pipe a sort of skeleton car form the chassis to the roof pillars.
Now coat them with the bed liner heavily and see if there's traction.
garage 54 just Cracked the Puncture proof consumer tire conundrum. will not develop flat spot from sitting. survives burnouts
Did you know? You can buy a polypropylene baseball bat and it's tough af. Now u know
Awesome thanks 👍
YESS
get more micro plastic into your ground!
makes it more durable.
Bravo.......u should see what a 3d print a I would make......cheers
Need 4 of ‘em.
Imagine you flattened the sides and glued them together. Then filled the tubes with no open Ts with resign. Once rounded right diameter glued on tire tread. Then test them vs police spike strips. For the ultimate get away car. Or wrap the spike strip around the axel.
You should make a whole car out of PVC tubes at this point!!
Yeah I said that too, Polypropylene tubular car chassis! 👍 Then Sheets of the stuff to make the panels, these tubular things as all four wheels... The list is endless! Hahaha
eat your heart Michelin! this would be fun drifting around the test track. maybe a poly pipe tail shaft?
torsion bar getting a good work out
Now use heated sand to make circles of PVC.
I never thought that would work!
Amazing how durable those pvc pipes proved to be.
This is PP not PVC.
Take some treads and glue them to the outside edge, then it will gain some grip on road
Build a whole Lada chassis and wheels out of the tubing, panels out of perspex, pop an engine and drive train and go off roading.
Now with that, how about making them fit tires like actual wheels? Axles and driveshaft?
Make a propshaft
😸 Con rods.
a.. polypropshaft if you will
@@olnnn Brilliant, I wish I'd thought of that!
madness, love it
How about make a complete exhaust system using the same quality pipes.?
Just wow.
Make PVC / polypropylene pistons.
You guys have to try them again in winter ❄️☃️❄️
you could have slapped some tyre retreads straight on to them once they were rounded off
Great channel!
Wrap a hose around a wheel.
And inflate the hose.
In place of tires!
It's the best job, abuse things till they break. Just a question, has any of your experiments been used in the space program yet?
How about a whole tube chassis maybe even in the shape of a Lada
Test how long new theirs last whit a burnout
How about giant ball bearings for wheels. Or a Lada that runs on a lawnmower engine
They should do a lifted Lada build.
Very nice.
But the uneven wear of the tire may indicate some Suspension issues.....😅
I used to make my bike wheels indestructible with pool noodles cutting them in half and placing them on the inside of the tyre outside of the innertube never a single puncture other idea is pure rubber tyres like with my BMX at 5 years old those tyres I literally cut stabbed etc they're probably still intact a little extra bounce however you could fix that with suspension if applied to a car obviously
COOL story bro
Do the same thing you did with 3 in the hub, except somehow wrap the outside of the pipe with carbon fiber, and fill the inside with some kind of really durable material like flex seal, or maybe molten rubber? Then top it all off by spraying multiple layers of rhino lining material and/or flex seal on the outside, possibly some metal wire wrapped around the inside as a "radial"
You can get some real life out of those pipes!
Could this be used to make an airless tyre? As in, wrap a tyre over them?
Make a dune buggy type frame with this pipe, and put a Lada drive train in it. Basically a whole car out of pipe.
This would be pretty good for an apocalyptic set of wheels for horse drawn carts
and then it hit me
"vlad really is setting out with wheels made of PP pipes xD"
This experiment brought to you by! South Park’s Canadians!!👋😂👍
I'm blown away that they didn't immediately collapse just under the weight of the car. 😳
Lada Mars Rover. Fill with sand for extra traction
The music is nice lol
Excellent!
Is it possible to make a wheel from a steering wheel?
Please make more offroad test videos
Maybe a driveshaft next?
Connecting rod?
Could you fit rubber to them somehow and use them as road wheels?
good idea to make them even more durable
Try hundreds of ferro rods stuck into a tire tread and do some super sparky burnouts at night? Be a cool visual anyways.
Do the same thing but use wooden posts !
Impressive. I was waiting for a crack as soon as the car was lowered onto the ground.
What about just a bunch of pipe spokes in a star shape and just drive on the tips/ends of the pipes!
I don't think you have invented a replacement for the wheel and tyre yet maybe one day keep up the entertaining videos
Fill them with concrete - or brass. Lead?
How about sleeving a engine block with that same type of pipe?
no use letting them go to waste :D cheeky