This was just in time. I'm to the point of mounting the plate on a live axle and I would have never thought to put it all together then clamp then weld. Thank you for doing an awesome job explaining the easiest way to make sure everything lines up.
Over all good video. I would like to point out that you should leave a gap in the slot for the engine mount to allow adjustment to the chain tension as the change will stretch
Subscriberoonied! Yep that's smart idea to put the Horseshoe clip on with open end going towards the back in case your chain hits bushes and stuff it won't get knocked off
+Alexander Todt it is completely, 100% dependant on the welder itself so it will vary by welder and there is no clear answer other than 'read your users manual' and set your welder to the settings needed to weld 11 gauge steel.
I have Royal Enfield DIESEL bullet, i planed run without gear box,so please help which cvt torque converter suitable for bullet engine.(Greaves Cotton engine 5 HP ).
Can I ask you something man I was working if you can take off this go kart plate n the kill switch too cuz they all ready cut the motor plate n they all ready broke off a piece of my kart
Good job man, but I have a question, what I have to do if I want to spin both rear wheels? Do you think 250cc has enough power to do a drift buggy/kart? Thank you from Spain.
Live axle is the only way, unless you make some sort of a jackshaft type of setup with two one wheel assemblies, but that is impractical, a live axle kit (solid axle) is the way to go to get both wheels spinning at the same rate.
+melvin moo I already have an article out on the throttle cable installation. The throttle cable video will be released after the seat, steering, and brake videos come out. Here is the link to the go kart throttle cable installation guide kartfab.com/go-kart-plans/go-kart-throttle-cable
I got a question. I have the exact same motor but I have it lifted and the engine runs good but it turns the clutch when in idol. Am I missing something so it won't want to run off on me or is that how it is?
open up your users manual, and search how to adjust idle speed (black plastic screw on top of carb) also, make sure your throttle is returning completely to idle position, if not, some people install a little spring by drilling a hole in the throttle arm and connecting the spring between the throttle arm and pull cord cover.
i live in guyana but i don't have no engine to buy anywhere in my country which i have to build the frame my self. and i have a motor bike engine can it work
+KartFab alright but what about for a birel racing go kart? I recently bought one but it didnt come with an engine or engine mount and theres so many on the website but idk which is the right one
like I know you can doit in lawn mowers where only one wheel is spinning freely while the other has the power when you lock the axle both wheels have the power I just notice that the do kart in the short kill was only the one tire with power
noooo! haha. best is a 10 or 11T gear on clutch, and a 52-60T axle sprocket. it'll still get you over 25mph with an 11T/52. if you don't care about accelerating quickly, 11T/44 gets you 32mph @3600 rpm, but you will burn the clutch up sooner.
Awesome video! Just what I was looking for. I bought my son a pedal car from my Tractor Supply and he wants me to convert it to a motorized vehicle. It'll be a nice project for us to work on together. If the frame is not sturdy enough, I'll be sure to give you a call.
You didn’t give me the information I asked for, so I can’t tell you what’s wrong. If I had to guess it’s your gearing. If you have a clutch your tires should be no larger than 15” and the axle sprocket should be around 60t/and a 10t clutch, or a 72t axle and a 12t clutch
This fool can't weld something about the support weld you using a stick because you can't afford it made you can't even weld with a MIG make it make it harder so you can if you can weld with a stick you can weld with a MIG with a stick you can't weld with a MIG
if you do the live axle plans that i have on my website it will go 35-36 mph. If you use the free plans top speed is 25-30 mph regardless of which engine you use.
![เปิดคำทำนาย นอสตราดามุส - บาบา วานก้า ปี 2025 คนทั่วโลกต้องเจออะไรบ้าง? | แฉ 11 ธ.ค. 67 [2/3] |GMM25](http://i.ytimg.com/vi/xmTIKWJUMPM/mqdefault.jpg)
This was just in time. I'm to the point of mounting the plate on a live axle and I would have never thought to put it all together then clamp then weld. Thank you for doing an awesome job explaining the easiest way to make sure everything lines up.
what size bolts
I think he meant 5/16-24. Standard on the 212 predator motor. I opted for a torque converter over the centrifugal clutch. Supplied bolts were metric.
This is such a good demonstration dude thank you for this I have a predator to replace a old engine in my go kart.
Over all good video. I would like to point out that you should leave a gap in the slot for the engine mount to allow adjustment to the chain tension as the change will stretch
can you make a video of how to put your gear and the drumb break on the tire? thanks that will help alot
+Luis Barajas watch the whole playlist, the link is in the description. Iirc it's "go kart assembly
Does the engine require oil?
Also how much total is it to build one of these go karts?
Does it matter how far back the motor is mounted as long as the Sprocket and Clutch are aligned?
Nope not really. Just make sure you have the right sized chain
Subscriberoonied! Yep that's smart idea to put the Horseshoe clip on with open end going towards the back in case your chain hits bushes and stuff it won't get knocked off
Hey i need just the clutch could you send me a link please?
Where do I find the drive wheel assembly at?
Link in description click around in the go kart plans. It has individual links
@@KartFab thanks man
what size is the chain
I'm having a tough time figuring out the drive wheel and sprocket any tips
Excelente proyecto. Aquí en Colombia hay muchas personas que nos gustan los karts. Gracias por tan bello aporte. Bendiciones.
De nada. Aunque soy gringo, hablo espanol y me agradezco que hayas comentado y buena suerte con su proyeto.
Very good engineering! Great work!
Hi what intensity do you apply when wielding MIG ? Thanks for clear and thorough explanations.
+Alexander Todt it is completely, 100% dependant on the welder itself so it will vary by welder and there is no clear answer other than 'read your users manual' and set your welder to the settings needed to weld 11 gauge steel.
Great job on 6000 subscribers!!
Thanks :-)
You deserve it:-)
I would like to use as many parts that you use, but i would like to use street tires, like the ones with no grit. Help?
Just select “slicks”
is it one wheel drive? or live axel? can u pleaseeee make a pros and cons video of 1wd vs live axel?
one wheel peel at 1:00.
I have Royal Enfield DIESEL bullet, i planed run without gear box,so please help which cvt torque converter suitable for bullet engine.(Greaves Cotton engine 5 HP ).
How long is the chain ..?
What size bolts do you used to mount the engine
does your spacer does it spin freely?
yeah I don't either I'm a newbie but I'll figure it out with a few burned clutches I'll learn from my mystakes
Can I ask you something man I was working if you can take off this go kart plate n the kill switch too cuz they all ready cut the motor plate n they all ready broke off a piece of my kart
My driveshaft has splines, will it work with the type of clutch you’re using or do I need to find a different clutch or shaft?
driveshaft? you mean rear axle? using a PTO driveshaft is a whole 'nother ball game
Good job man, but I have a question, what I have to do if I want to spin both rear wheels?
Do you think 250cc has enough power to do a drift buggy/kart?
Thank you from Spain.
You will need a live axle go kart. kartfab.com/live-axle-go-kart-plans 250cc bike engine is a lot for a go kart if it is a motorcycle engine.
+KartFab I have a question. Is there any way to make the both wheels spin instead of just one wheel? But doing in the same way?
Live axle is the only way, unless you make some sort of a jackshaft type of setup with two one wheel assemblies, but that is impractical, a live axle kit (solid axle) is the way to go to get both wheels spinning at the same rate.
***** I'm making a offroad gokart
whats the total distance it can go on an full tank? +kartfab
+Pritish Gandhi depends on how u drive it. You would get 4 to 8 hours per gallon of gas.
+KartFab how much fuel can we store in it
Pritish Gandhi if its a 212cc about 0.9 gallons.
Can you go over the throttle cable installation?
+melvin moo I already have an article out on the throttle cable installation. The throttle cable video will be released after the seat, steering, and brake videos come out. Here is the link to the go kart throttle cable installation guide kartfab.com/go-kart-plans/go-kart-throttle-cable
You are very good worked that makes me sub
gave me the information that go kart
Anyone have any tips im thinking about get a go kart frame and motor and trying to make it work
is the $100 harbor fright welder ok for welding a go kart? And could i convert the one wheel drive to a live axle?
+Hk Savage you could just do live axle build. Just google kartfab live axle plans. There's a live axle kit for it as well.
If the power is closer to one wheel than the other, does that mean you will have to constantly correct steering?
+Creamated Biscuit no. It drives straight.
***** ok
Should always pull with stick. Nice video though helped. Cheers
bro i need a help i want to know how to paint a fibreglass sample plz tell this in ur next video its urgent
can I replace the centrifugal clutch with a torque converter on the live axle go kart?
yes
can i put on an axle for 2wd?
I got a question. I have the exact same motor but I have it lifted and the engine runs good but it turns the clutch when in idol. Am I missing something so it won't want to run off on me or is that how it is?
open up your users manual, and search how to adjust idle speed (black plastic screw on top of carb) also, make sure your throttle is returning completely to idle position, if not, some people install a little spring by drilling a hole in the throttle arm and connecting the spring between the throttle arm and pull cord cover.
+kart fab do you think you could do a vid on a go pro of you riding
+CAMOKIDS first, i will finish editing the footage I have of the actual build. Thanks for the request.
What do u use to edit.
Adobe premiere
Do I need a clutch or can I use it just use it like that
Can I do this without welding it together?
Can I do this with a shopping cart
hi cart fab I was wondering do you know how to lock an axle
+CAMOKIDS what do you mean by lock?
would the plans for this build work with 2 inch suare tube??
1"
***** only works with 1inch?
1" is what the plans call for
what do put to get the sprocket and brake to go on the rim plz help!!
google "kartfab go kart assembly video" and you will see step by step
Ok I have a serious question and I really need an answer does the engine only go on one back wheel?!?! And if so won’t that make the go kart spin?
Yes it does, and no it doesn’t.
@@KartFaboh ok thanks
if the engine is secure with just the 4 bolts in, is it possible to not weld the 4 corners?
You gotta weld the plate to the go kart, bolts do not hold the plate to the go kart itself.
okay thanks
hey i was wondering if can use my bike engine for my go kart please reply soon so i can start build my go kart now
+melroy james what engine is it?
i live in guyana but i don't have no engine to buy anywhere in my country which i have to build the frame my self. and i have a motor bike engine can it work
+melroy james yes it can but you will need to figure out how to set it up.
ok thanks very much for replying
I live in the U.K. And was wondering where could I buy all this stuff
+George ThomsonB it ships via FedEx international link in description. I don't live in the U.K. So I couldn't tell you where to get parts there.
When you buy the kit and u add the 5$ for the mounting kit does it comes with the engine mount seperate or already installed
kit comes with engine plate. i just put the link to the engine mount itself just in case you only wanted that.
+KartFab alright but what about for a birel racing go kart? I recently bought one but it didnt come with an engine or engine mount and theres so many on the website but idk which is the right one
oh, i dont know i cant help you there. Its probably a 15 degree racing mount btw, just look up go kart racing engine mount or something like that.
+KartFab yeah true alright thanks so much kartfab really appriciate it XD
no problem
How do I contact a vertical Moter for cheap
I am in Chennai Tami Nadu.India. where to buy online.which website.
like I know you can doit in lawn mowers where only one wheel is spinning freely while the other has the power when you lock the axle both wheels have the power I just notice that the do kart in the short kill was only the one tire with power
This doesn't use a peerless transmission. It's only one wheel drive. The simplest and easiest and cheapest way to build a go kart.
Wouldn't it be better to have the bigger sprocket on the clutch and the smaller on on the axle so you get more speed and less torque?
Sounds good in theory but that’s actually one of the ways you can burn up your clutch.
noooo! haha. best is a 10 or 11T gear on clutch, and a 52-60T axle sprocket. it'll still get you over 25mph with an 11T/52. if you don't care about accelerating quickly, 11T/44 gets you 32mph @3600 rpm, but you will burn the clutch up sooner.
Awesome video! Just what I was looking for. I bought my son a pedal car from my Tractor Supply and he wants me to convert it to a motorized vehicle. It'll be a nice project for us to work on together. If the frame is not sturdy enough, I'll be sure to give you a call.
good luck!
frankmmiii how’d it go?
Yeah, how'd it go? Is it perfect?
my clutch always keeps breaking? i have to buy a new one every time i want to use it. do I need a pully system or something?
What do you mean by breaking? Describe what happens. What is the size of the thing you are riding? Teeth on clutch? Teeth on axle sprocket? Jackshaft?
KartFab it spins but delivers no torque to the axel
the clutch looks identical to the one used in the video
You didn’t give me the information I asked for, so I can’t tell you what’s wrong. If I had to guess it’s your gearing. If you have a clutch your tires should be no larger than 15” and the axle sprocket should be around 60t/and a 10t clutch, or a 72t axle and a 12t clutch
I also use a hammer and chisel for removing a link, my dad done it for years works great.
This fool can't weld something about the support weld you using a stick because you can't afford it made you can't even weld with a MIG make it
make it harder so you can if you can weld with a stick you can weld with a MIG with a stick you can't weld with a MIG
is there any way to make it a two wheel drive in the rear
+Noah Calderon yes. Go to my live axle plans page.
***** thank you
How many teeths have the sprocket I mean the big one ? Thanks
60
frm where cn we buy dis engine mount sheet????any online site?
+Abhishek Vasudevan link in description
Thanks but how to fix clutch, brake and starting.
The Inovater have you checked the brake fluid
what is purpose of the Centrifugal clutch
To prevent engine from stalling
0:33 skits blood blister mate haha
whats is your 3D realm software?
+Devin Witt CAD
would the scooters engine work here??plzz rey
+vlog maker you would need to figure that out. I designed the kart for a standard 4 stroke 3:4" shaft industrial engine and cent clutch
How much did you pay for the whole carr
is it necessary to use clutch..??
sure
could u put 2 engines on that axel
You would need to do live axle for two engines
+KartFab love ur builds
+KartFab yea but wat if u put another drive weel the other side????
Please where can I buy the engine
The engine store
it is okay if i use predator 420cc
+Muhd Haziq yes but with live axle only see my live axle plans.
Where did you get the engine
Harbor freight
What is the total weigh of ur go-kart?
is this sell in india
how to stop clutch moving back on forth keeps popping chain off
+Tony Gonzalez set screw or spacers.
I set some spacers behind the clutch but made the pull string on the motor hard ? That's bad right ?
I have no idea what you are talking about or why the pull string on the motor would be related to the clutch.
Where can I buy the kit?
Https://kartfab.com/go-kart-plans
we find the clatch and the others wtih the engine ?
+Marocain Ismael What ?
Which engine did u used plz reply
Predator 212cc
KartFab first of all thanku sir for replying and second how much does it cost plz tell sir
ujjval verma about $100 from harbor freight
Nice
How much did it cost you completing this gokart?
about $750
+KartFab okay how much was all of the steel you bought for the body? I am wondering because I can get my steel for free
it was about $150 for me so you are really only looking at the cost of the kit, and the hardware (nuts/bolts)
do you want to sale this go kart
How many cc is the engine
212cc
Tnx for plan
where i can buy an engine?
+Cadibaluzzi link in description, comes in the kit or you can purchase separately
How can I make it RWD?
S&M Teen Racing Team put the engine on the back of the go kart so it powers the back axel
How much would all this cost?
+Nathan Rodriguez $700 roughly when all said and done.
What kind of clutch
centrifugal clutch
hey is 110 cc motor enough for 2 seater go kart??
vaishali kankal im pretty sure any cc above 100 is ok as long as the riders arent too heavy
how much kmh he can go?
+GRamingzone 1 25-30 mph
ok when i go buy 8hp engine or 13 hp how much mph he can go ?
if you do the live axle plans that i have on my website it will go 35-36 mph. If you use the free plans top speed is 25-30 mph regardless of which engine you use.
that's amazing
One wheel peel, I'd rather put a differential on mine.
solid axle for the cheapness,, then it's like Posi, but turning on pavement is a little bit harder
where i buy engine
What engine?
Predator 212
What abut tha brakes
I
And 4 stroke this engine
reply*
💖💖💖💖💖💖💖💖💖💖💖💖💖
Too bad you have to know a trade to build these.
Yay • - •
How many teeth
10 clutch 60 axle