How I wired up the blind spot module on my 17 fusion
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- If you find this video helpful feel free to donate at paypal.me/nickthecarguy
forscan download forscan.org/do...
obd device els27 www.ebay.com/s...
passenger blind spot I'm selling www.google.com...
driver and passenger mirror not yet selling will be soon
blind spot module part number HP5Z-14C689-C
Parts Required (part numbers are same for both sides except for OEM mirrors)
Blind Spot Radar, referred as Side Object Detection Left/Right (SODL/SODR) modules in this guide: EM2Z-14C689-A
Pigtail, a.k.a Side Object Sensor Connector: WPT1434
Blind Spot Radar Mount Bracket: FT4Z-14D189-A
Blind Spot Radar Bolt: W505563-S437
www.mustang6g....
very informative as always man!
Hello, have a few questions, 17+ blis have 5 (2x ground, ms can +/-, power) and 4 wires (GND, ms can +-, power). Starting from 2:10, you said that you plugged into the trunk harness, so you bolt together ground from L and R radars and the same for power? And one more, did you plug to ms can + - 2 or 4 wires (I mean one plus and minus from R and one +- from L sensors) or bolt + from left and right sides together?
thank you for your video, I have a question, I will buy a used module, I will have to reprogram it or it is not necessary. I have a 2014 Lincoln MKX.
You will need to reprogram it as the blind spot have Vin stored into it
Can you explain to us how to program the module in Forcan for different VIN number? Thank you so much for sharing your knowledge!
Did your vehicle come factory with blind spot? If you have the lastest forscan verson they added it in the easy mode you would go to sodl/sodr (non asbuilt format) then there should be one that show vin you would type in your vin number and make sure it's all capital
@@Nickthecarguy ... Yes my truck is equipped with blis. i bought a used radar to replace my water damaged one. i appreciate the fast response.
@@11g11g try what I said if you have problems let me know I can help you out through teamviewer
@@Nickthecarguy Hello Nick i wanted to tell you i programmed the SODR (Right side) module by typing the VIN number in (non as built format). But still it didn't work. So i also went to SODR (as built format) then chose (load factory AB). It said i don't have the file so it downloaded the file (need internet) then i clicked on (load factory AB). It WORKED!
Thank You for the help and i just wanted to share this!
@@11g11g thanks for the update I wonder if it caps wasnt on or if there was a block or somthing else beside the vin that made it act up
Is it right, that wiring harness for blis is missing on FF restyle version (2017)? Cuz I saw a few guides for 2016 Fusions and this vehicles got default wiring.
I know the 17 titanium come pre wired for on the doors but on the back of the trunk where the module goes im not for sure on that
Thank you, can I have this book in pdf
Hi. Can you write title of this book? I need it. Thanks.
www.ebay.com/itm/404747882987?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=La5MFMguTnG&sssrc=4429486&ssuid=MjZ31FyeR62&var=&widget_ver=artemis&media=COPY
@@Nickthecarguy thank you very much. You are kind and helpfull person.
Hi. Do you remember, where to connect mscan?
I ran mine behind the gateway module
Preciso desabilitar a função anti colisão frontal e lateral do meu fusion 2014 tive um problema com o meu painel original e tive que substituir por outro e estou com esses alertas...vc tem o passo a passo?
Hello,
At 8:32 . How can I get such a manual?
I got mine off of ebay it is the whole wiring book for the 17 fusion and mkz
Thanks a lot!
Are you just selling just the mirror for the driver side, please let me know the price
I will be selling the passenger side and driver side asking 300 a piece for the mirror
Do you still have the module for sale?
Unfortunately I dont have any blind spot module left
Ok thanks. Can you please give me your email address.
@@georgegon4023 my email is nickours20@yahoo.com
How much for the right side mirror
When I do sell it probbly about 300 for it