Thanks for the video brother! My passenger side tail light had a crack and when I took it to the car wash it got full of water. Few hours later after the car wash I drove from Houston to Odessa about 8 hours without any electrical functions and A/C in the middle of summer time. Found your video and removed the tail light and found it full of water! Thanks man!
So after drying everything and you put everything back together was the problem fixed and the BLIS operational again? Dealership is quoting $1,100 for a new tail light and module plus $300 for installation which I think is a robbery.
I'll just add my comment to the rest and say THANK YOU! This fix worked. I had a cracked tail light and assy and will have to replace it, but drying it all out, cleaning the sensor mount, connections, and gasket did the job. I put some packing tape over the cracks until I can get the replacement. Thanks again.
@@peprgoodz ... Thank You!! My problem just started yesterday. Everything you stated too. Gator Ford Service Advisor stated he has been with Ford for 15 years and never heard of the problem. Liar!!! --- You fixed my problem with a 10 minute video...... Kudos & BZ.
This happen to mine. All the lights in the rear went out, brake lights including (minus cabs third brake light). It went away on its own somehow so I didn’t bother anymore. A month later (yesterday) it did the same thing. I’ll try and replace the module and make a video showing everything
Bro I've been having this issue for a year. Just took out the fuse and lived with it. Tomorrow I'm digging in deeper into the assembly. I was a little worried about taking the radar off.
What do you do if you pull the tail light see the water, clean it out , dry it out ... put in a new tail light lens cover and reuse the BS sensor but it still errors with Cross Traffic and Blind Spot errors when you start it ... Can i simply replace that Sensor and ill be good or is there more to it than that ?
Thanks for posting the video, mine was the same as yours, light was full of water. My husband dried it and it worked. Your video probably saved me over $1,000. But, Now it just happened again so water probably still getting in..
I have a mustang gt 2017 it’s says blind spot fault but the problem it’s went I put the reverse the a/c turns off and the tail lights too I don’t know if you can help any idea
anybody know why on a 2023 s/C ranger the rear blis actives the opposite mirror left rear does right mirror and right rear does left mirror ford NZ are useless
Same issues, and the left tail light was wet. 20 mins and the problem was solved. Thanks for saving me a ton of money!
That’s great I saved you some money! Hope for many others to save money as well!
I just had this issue, and noticed the water in the tail light. 5-10mins later thanks to your video, it seems to be fixed.
Glad it helped
Did cleaning it up fix the issue, or was the module damaged by the water?
Thanks for the video brother! My passenger side tail light had a crack and when I took it to the car wash it got full of water. Few hours later after the car wash I drove from Houston to Odessa about 8 hours without any electrical functions and A/C in the middle of summer time. Found your video and removed the tail light and found it full of water! Thanks man!
I can only imagine that hot drive! Glad you found the video useful! Wish I had more helpful videos to post.
Subscribe to my channel
Always count on you tube to find everything! Thanks man. Right tail light with same issue full of water.
No problem! Glad video helped! Please subscribe!
Thank you for this video, you solve my vehicle issue… it was the same problem water in the rear light and module was sink in water 😊😊
You’re welcome! Glad I could help!
Thanks for the help, followed your directions and it worked perfectly. Easy (and cheap) fix. Thanks for sharing.
I’m glad you found my video and that I could help! Please subscribe!
Exact same issue! Had a hole in my tailight. All fixed in 20 min, and most importantly, FREE!!!
Thank you for sharing
You're welcome!
You are a life saver homie!!!! Thank you so much. Much love and keep it up 🙏🏻
No problem! Glad I could help! Subscribe to my channel!
Gracias Amigo, me ayudaste a solucionar mi problema, quedo un lujo mi amigo, Saludos
So after drying everything and you put everything back together was the problem fixed and the BLIS operational again? Dealership is quoting $1,100 for a new tail light and module plus $300 for installation which I think is a robbery.
I'll just add my comment to the rest and say THANK YOU! This fix worked. I had a cracked tail light and assy and will have to replace it, but drying it all out, cleaning the sensor mount, connections, and gasket did the job. I put some packing tape over the cracks until I can get the replacement. Thanks again.
You’re welcome! Glad it worked for you!
I had the same problems. Watched this and fixed it and it worked! Awesome. Thanks
Glad it helped! You’re welcome!
I had the same issue! This helped save me so much time and such an easy fix!
Time is money! Money is time! Glad I could help!
100% fixed my issue on 2015 F-150 lariat
Good to know your problem is fixed!
@@peprgoodz ... Thank You!! My problem just started yesterday. Everything you stated too. Gator Ford Service Advisor stated he has been with Ford for 15 years and never heard of the problem. Liar!!! --- You fixed my problem with a 10 minute video...... Kudos & BZ.
I’m glad I could help!
Bro! Your Video Helped me too much!
Thanks 🙏
I’m glad to know it help!
Had the same issues. Thanks for this video man!
You’re welcome!
Great vid just saved 2500 they was trying to charge me
Happy to have played a part in saving you $2500! Please subscribe!
Thank you Mr. Madrid, this solved my issues too.
Glad I could help!! Great feeling to know I could help some people out there fix their vehicle!
Fixed my problem. Thanks so much!
You’re welcome! Glad I could help!
so far so good. all errors cleared. thanks bud.
Glad this video helped you!
This happen to mine. All the lights in the rear went out, brake lights including (minus cabs third brake light). It went away on its own somehow so I didn’t bother anymore. A month later (yesterday) it did the same thing. I’ll try and replace the module and make a video showing everything
This video saved me! Thank you 🙏 thank you
Glad video helped you!
Thank you sooooo much God bless you this video helped a lot problem fixed!
You're welcome! God bless you!
Bro I've been having this issue for a year. Just took out the fuse and lived with it. Tomorrow I'm digging in deeper into the assembly. I was a little worried about taking the radar off.
For me it was the connector near spare tire it was very wet dried it and used 2 layers of electrical tape on it everything works good now
Which connector? 🤣
What do you do if you pull the tail light see the water, clean it out , dry it out ... put in a new tail light lens cover and reuse the BS sensor but it still errors with Cross Traffic and Blind Spot errors when you start it ... Can i simply replace that Sensor and ill be good or is there more to it than that ?
I’ve cleaned out the moisture, it’s absolutely dry. Any way to turn the alert off?
Did you figure out how to get the alert off after drying everything out?
Man I just had some Morimoto lights installed and I am getting the same problems that you just described. What do you think I should do?
Dealership was going to charge me nearly $3,000, hopefully this works
Had the same problem poured out a coffee cup of water.
Thank you for this video!
You’re welcome!
Had mine stolen last night from my house , pissed me tf out!!!
Were you able to get it to work just drying it off or buy a new module? Looking at these modules they cost about $800!
After I dried it, it worked and went back to normal.
Thanks for posting the video, mine was the same as yours, light was full of water. My husband dried it and it worked. Your video probably saved me over $1,000. But, Now it just happened again so water probably still getting in..
Thank you. It works now.
You’re welcome! I’m glad it helped you fix your issue.
Thanks!
You’re welcome!
Thank you !!!!
You're welcome!
Here is your fix drill a drain hole.
I have a mustang gt 2017 it’s says blind spot fault but the problem it’s went I put the reverse the a/c turns off and the tail lights too I don’t know if you can help any idea
Same problem
My truck is having the same exact issue but i dont see moisture in the tail lights, any other places i can look before i get raped at the dealership?
I have the same issue but my taillights are good , and my modules wires are good, idk what to do anymore
Did you actually take the lights off and check for water?
I just bought my Ford Expedition 2022 and I have the same issue!! Honestly it’s not reliable car! It’s piece of junk 💩👎
anybody know why on a 2023 s/C ranger the rear blis actives the opposite mirror left rear does right mirror and right rear does left mirror ford NZ are useless
this sht is about thousand dollars,,,