Kohler Lawn Equipment Hard Starting Fix - Zero Turn Mower Choke Adjustment
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- If your Troy-Bilt, Cub Cadet, Toro, Ariens, Gravely, Dixie Chopper, Craftsman, or Husqvarna zero-turn mower, riding mower, or garden tractor with a Kohler engine takes a long time to start the choke may not be closing far enough.
Some Kohler engines feature a manual choke control integrated with the throttle linkage. If the throttle linkage is out of adjustment, the choke won't close far enough to help the engine start without cranking for an exorbitant amount of time, or may not start at all without the use of starting fluid.
A simple adjustment of the throttle cable is all that is required in order to get proper closing of the choke and allow the mower to start much more quickly. The procedure is demonstrated on a Troy-Bilt Mustang 50 XP zero-turn mower with a Kohler 7000-series engine, but the procedure may be the same, or similar, with other manufacturers of lawn equipment that use the Kohler engines with the integrated manual choke.
------------------------------------------------------------------------------------------------------------------------------------------
Other videos that may be of interest:
First Zero Turn Mower - Learning Important Things
• First Zero Turn Mower ...
First Zero Turn Mower - Learning Important Things
• First Zero Turn Mower ...
If this video helped you out, either by saving you time and frustration troubleshooting, or even better, if it saved you a service call, you can thank me by buying me a cup of coffee or a beer (in a roundabout sort of way) by clicking the Superthanks button under the video to make a small contribution. Thank you for your support.
I am beyond grateful for this video. I've been trying to troubleshoot this issue on my Troy Bilt Mustang for YEARS. Of course it would eventually turn over once warm. And it would get worse when you clean the air filter... which now makes sense. And it could never start without draining the battery in cold weather, so I had to keep a jump starter nearby at all times. This machine has been to multiple mechanics who never did this simple adjustment. I just installed the 3rd battery in 8 years, and when it still wouldn't start, I found this video. I had to pull my cable a tad further back than you recommended, because the choke still wouldn't fully engage. I think my choke rod might be a tad loose/bent, but no big deal. Machine starts instantly! Thank you so much!
Reading comments like this always makes my day. Glad I could help out.
You still need to go to Church but as soon as I watched this Video my wife said let's go outside right now and try it. Boom is fixed and roaring to go. My wife told God thank you for putting this video in front of us. I was fixing to check and adjust the valves and also rebuild the carburetor. Thank you for making this video and you did it so well.
This video is a huge help! Been dealing with hard starting for two years and with this one adjustment starts perfect again! Thank a million!
Thanks for this video. As soon as I saw the video, I knew this was the fix I needed for my Cub Cadet. Solved the issue perfectly.
You broke this down ESPN style. Somebody give this man a beer!"(Stone Cold voice) 🍺
100% Fixed my on-going issue. You sir have done your good deed for the day. Your new buddy, (me) declares that you can take the rest of the weekend off and skip going to church now.
Thank you soo much, for posting this video. I've been fighting with my Cub Cadet Ultima, for 2yrs. With hard starting. Especially first time in the spring. Sometimes killing the battery, trying to start it. The throttle adjustment solved the problem. Can't believe it was that easy to fix.
Great to hear. Glad I could help. Thanks for the comment.
Update! Solved my problem! I have a Kohler Courage 17. Choke adjustment is done with a screw similar to the idle speed screw. Starts quickly now. Thanks for the video.
You are welcome. Glad I could help.
You saved me hours or days of tracking down this problem. I can't believe it was such an easy fix. Many many thanks!
Glad it helped!
I just made the adjustment you showed and my Cub Cadet fired right up. Thanks for the great info!
Great job!
I had to replace the carb on my cub cadet. The choke was not closing all the way. This video helped me adjust it. Thank you so much.
Glad it helped
I think your video just shed light on the problem I have.
Thank you!! My kubota zt740 would start hard, run rough etc.. after screwing with it for weeks and changing fuel lines, pump, filter, air filter, plugs etc.. this finally worked! I feel like an idiot but thank you sooo much!!
Just fixed the cold start on my Cub in ten minutes thanks to your video! You rock brother....
Excellent!
Same here, thanks for the tip. I wasn’t pushing the throttle far enough to engage the choke. Freaked me out! Cutting grass again!
I’ve been putting a cap full of fuel down the carby to start my cv16 for more than 10 years now , i just ran out to the shed and adjusted the choke and the darn thing fired into life first crank . Thank you 😃
Right on
Thank you so much, I watched your video checked mine, it was not closing all the way. I adjusted it and it fired up faster than it did when I bought it brand new. Thank you so much, I appreciate the video and appreciate you.
Thank you so much. Dude you just save me a service call. Mine used to be so hard to start and it could easily take five or six different tries. I did my choke adjustment like you showed us and it probably turned over for 2 seconds and fired right up
Thanks for the comment. Always good to hear when things work out for people.
Excellent video with very clear instructions- I got my mower up and running thanks to you.
Glad I could help. This comment made my day. Thx.
I just did this to fix my TroyBilt Mustang. It’s been tough to start for the last 4-5 years. It fired up the first time though just now after performing the fix. I did mow my lawn earlier today though, so hoping it starts just as well on a cold engine after a couple of days without use.
Thank you! You fixed my mower issue that I have battling with for a couple of years! This solved my issue instantly. Very grateful for your help!
You bet! Glad I could help.
Well done video sir.
I have a toro 4216 zero turn mower your procedure worked for me, i am so glad you posted this video fix tyvm!!!!
Great to hear!
This is just what I needed. Fixed the problem on my Cub Cadet XT2
Excellent!
Thank you, thank you, THANK YOU! No more starting fluid. Scag 48 with a Kohler Command 14.
I realized this was the issue on my Mustang 50 also, but did not set the throttle to the indent position when adjusting. Thank you!
You bet!
I had the same problem with a John Deere S180. Bought it from a Guy for $2000, normally a $3600 machine. I could only get the mower to start with Quick Start, til I adjusted the throttle cable. Easy fix, for a machine with only 13 hours on it. I sold the mower a week later for $3000.
Great presentation. Seems to be the answer to my Kohler 22HP problem on my Troy Bilt zero turn
Excellent!
I have the exact mower as you and just found your channel. This is gold. Subscribing for any future mower videos you may make and thank you.
that is good information, I've had cold starts that were hard to start before. I need to pay attention to the choke position and the linkage position
A test to see if your adjustment is off is just manually pull up on that choke rod while cranking the engine. If it fires up faster then you know it's not getting enough throw via the throttle linkage.
OMG! I have been having this problem for about three years. This one mechanic said that he could fix it, but when he quoted me a price, I laughed and said, "No, I'll pass, but thank you."
I've tried chemicals to clean the carburetor, I've tried all kind of things to get it to start without puring gas in the carburetor. But no luck. As a matter of fact, I kept gas in a water bottle to start it when it would cut off. I've even ordered a new carburetor, installed it and wam...the same thing,;it didn't start. I thought that I would have to live with it.
But thanks to you and your so detailed and easy to fix explanation video, I tried it, done exactly what you said, and bam...on the first try, it cracked up. I was like, "What the f"*k...it worked." I was so happy.
So from my heart, THANK YOU, SO VERY MUCH! God bless you, and again, thank, thank, thank you.
Your comment made my day. Thank you.
@@thecountrylivingproject3263
👍 Thank you.
Thank you Sir. Just the answer I was looking for.
Happy to help.
Perfect instruction,thank you.
You bet!
Excellent video !
Thank you very much!
Brilliant Video! Thanks Dude! 👍
No problem 👍
Great 👍 job guys I appreciate all your Tips and support and video's keep up the great work e😎🤙🥃🍷
Good stuff here! ✔️💯💪🏽
thank you that was quite helpful
Glad it helped
Awesome 👍 job guys I appreciate your help and support tips great work and video's keep up the great work e
What a huge miss. I'm embarrassed but glad this misery is over. This throttle cable adjustment fixed the hard starting issue I had with the Kohler equipped Kubota Z125 zero turn mower.
Excellent!
Same machine. Same problem. Thanks.
My Kohler kt735 after replacing carburator, it loses power in tall grass now and before it never did. Everything is sealed as per carb gaskets. It will start and run with no issues, even when engaging PTO it seems to lose power then it picks up after a few seconds.
Thanks 😊
For a wordsmith guy I’m shocked you created a word “closement.” Also, I’m surprised this made it past the censor since you said “for shit” in this one. Great video though, I’ll be checking my choke closement now.
Closement,,I like that. BTW, I have one with LESS then 39 hours and it started doing this too. My DEALER said it's MY FAULT. ??????????????????? HTH is it MY fault? Thanks for the info. Heading back to the deal to tell him it's HIS FAULT. Thanks again.
I've found that lawn equipment dealers aren't exactly the best people to have to do business with (along with tractor dealers, automobile dealers, drug dealers probably, etc.) Fortunately, DIYers can find a good instructional TH-cam video on just about anything they need to fix. Just need to be aware of the occasional hack vid.
Dang, I thought this would fix my mustang 50. Choke barely moves when fully open even after adjustment, carb cleaning etc, but lots of play when I open it manually. It's like it's missing a spring on the Governor? It will start then die immediately, doesn't need ether.
Thanks. Would this also fix surging / rough idle when running and engaging blades. Mine doesn’t seem to hit the fast speed. The engine does slow up from the half way point to the low position.
I've had the issue of slowing down, or even stalling when engaging the blades. That happens when I've just started the engine and didn't let it warm up enough.
Troy Bilt Mustang 50: I see that you also don't have a cover on that little cubby area that holds things. Did you ever have a cover for that?
Never did have a cover. Not sure if there was supposed to be one or not.
Troy Bilt Mustang 50: I would like to get a yard cart of some kind to pull behind this mower...but it just has the horizontal bar on the mower. How would I "hookup" a cart/trailer to it?
You could weld or bolt a metal plate protruding from the rear bumper with a hitch ball mounted on it. Although, I'm not sure Troy-Bilt would recommend hauling something with it as it does not have heavy-duty hydrostatic drives.
How does one take the battery out of a troy bilt zero turn mower
How to increase rpm?
Troy Bilt Mustang 50: These 25HP motors use a fair amount of gas. How do you store 20-30 Gals to have on hand? I am looking for some kind of a 30gal steel drum with a hand pump I guess.
I usually use just a 5-gallon can. The tank hold about 2.5 gallons I think. I use less than a tankful to mow the approximate 2.6 acres of lawn.
@@thecountrylivingproject3263 I see. Yea, we have about 4 acres and have to go to the gas station every 2-3 mowings so I am just interested to get a store of gas in the workshop to last a month or two.
I need help
My mower will not spin, is there a lock?
I assume you are talking about the blades not spinning when you engage the PTO. Check the drive belt. If it is an electric PTO, it won't engage if there isn't a load on the system and could indicate a broken blade drive belt.
Mine just clicks could that mean the starter is bad?
Possibly. It could also be a low battery.
@@thecountrylivingproject3263 brand new battery
Ok