@@caiuopix depends on the tightness of your cube. It is possible not to break it if you have your cube really loose but i dont recommend it cuz it still might break it over time
@@ibrahimbilalzahidIts eaiser and better to pull out an edge Turn a layer 45° then push the sides out, then take out the edge Taking out a corner is bad because it has a much bigger piece than the edge keeping it inside making it much hard to get out first Which is why you should take out edges first
You shoudnt rip the corners for disassebling your cube instead do the Oskar Van Deventer signature take it apart technique or the Tony Fisher 'pry an edge with a screwdriver' technique
Dude no you are dameging it. Turn the top so it don't align. Then turn one of the side pices so it goes of easely. Not the corners. After that you gently remove every single pice all the middle parts are one pice. Than you clean your cube parts one by one. Let em dry so they don't mold then you put it back together.
Maybe we don't keep it in a clean place haha. I think and I have felt as well that the body feels a bit more friction than other cube and i think attract more dirt and dust due to static electricity
Why that corner first?
Corner: agh no not me first, that guy next to me.
Him: moehahaha the corner first.
Hahaha 🤣
Exactly thats the reason why i opened comments to write 😂
😂🎉🎉
@@confusedcuber5788just let him open it the way he likes to
He's too brutal..😢😂
Bro thought the whole cube was clean just by cleaning one edge side💀
The corner getting pulled out first triggered me as a cuber
Same💀
I just started and I wanna know why?
@@MidnightCrisiz if you do that the corner will break off in 2 pieces. After that say goodbye
@@CubeRS19 ohhh thx for info♥️♥️
rignht
Don’t pull the corner out first or you will break the cube, rotate a layer 45* then pull an edge out!
average non cubers
1. pulling corner first
2. doesnt lube the cube
3.original adjustment
If it’s just 2, they could iust be on a budget
Fr💀
Fr tho😂
4. Cleans one little side of the cube, not even the piece itself, and calls it done
Bro practically broke his cube by pulling out the corner first 💀
Why?
@@caiuopix when you pull it out from the corner it has a chance of breaking so its normally pulled out from the edge pieces
@@SantiClausIf I pull the corner calmly, is there a chance of it still breaking?
@@caiuopix depends on the tightness of your cube. It is possible not to break it if you have your cube really loose but i dont recommend it cuz it still might break it over time
@@SantiClaus So to avoid breaking it, should I remove the edge and then the corner?
Bro the corner dont pull the corner first
Don't pull the corner first it can damage the cube. Instead pull the edge piece first.
Wtf is the difference between edge and corner 😂😂
@@ibrahimbilalzahidedge has 2 color corner has 3 color
@@ibrahimbilalzahidif u don't know anything about Rubik's cube,shut up
@@ibrahimbilalzahidIts eaiser and better to pull out an edge
Turn a layer 45° then push the sides out, then take out the edge
Taking out a corner is bad because it has a much bigger piece than the edge keeping it inside making it much hard to get out first
Which is why you should take out edges first
Thank you for this comment. It was easier to remove the edge first.
Nah bro you need to do it with all the pieces and the core
bro ur pfp
It is RS3M 2020 but it not have sticker of MoYu
Bro put chalk inside the cube💀
No, that powdery substance for some reason happened to me too after a lot of using the rs3m 2020 and rs3m super v2
@@TGE.LeonYT it was sarcasm
prolly dignitas lube
Never put a corner in last always do edges last
Yeeaaa! This is my rs3m 😎😎
Bro is trying to hid the evidence in the cube 💀💀
You shoudnt rip the corners for disassebling your cube instead do the Oskar Van Deventer signature take it apart technique or the Tony Fisher 'pry an edge with a screwdriver' technique
I've been getting sub30 on my Qiyi cube and when I clean it even in the inside of each piece, I got sub 20
That's why cleaning and lubing your cube plays such an important role in speedcubing
please take out the edge first and put the corner back first
Maradona being a cube XD
As a first begginer and wanting to be speed cuber i still don't have lube but i do clean my cube since i know theres alot fo white dust in it
The way he pulled the corner out makes me sad😢
I have one question why did you just clean that one part why not the whole thing
ur supposed to take the edge out first and put the corner back in first
He just powdered the cube to show that the cube is dirty and he spoilt the cube by powdering it😢😢😢😅😅😅
Why did pull the corner first
Existe apenas 1 regra no mundo do cubo magico, nunca tire a peça de canto primeiro
Another rule : Don't mix drink and drive.
You tell me how many times it is being broken 😜🤣
My RS3M V5 is magnetic and is V5
Thank you nerdy!
Is rare a TH-cam cubist like my comments
Tbh one of my friends cube
Has alot of dust
Like you can make a posder industry with that sht
I wiped them and it performed way better
wait somethings off here...
Magnetic cube
why do I see my Rubik's cube weird when I turn it fast? Does it ever happened to you guys?
By wierd do you mean you see it distorted that you can't figure out what the next move should be while solving ?
@@nerdycuber yea
@@thatbruhguy19 sorry to hear that bro. I guess it's because of lack of practice. Once you get used to seeing it a lot you will see things differently
Don't use a cotton ball to clean your cube
DID YOU PUT GRANDMA IN THAT?
Let’s make it 1k likes 😊
Corner first no place 😿😿😿😭😭
Guys can someone help me? My cube's orange side is hella tight and I tried everything to fix it but I failed :/
Mine?💀
There's a bump on the rbw corner 😂
Hi bro
Hello brother
Alr who tf takes out the corner first like a psychopath
Me
Dude no you are dameging it. Turn the top so it don't align. Then turn one of the side pices so it goes of easely. Not the corners. After that you gently remove every single pice all the middle parts are one pice. Than you clean your cube parts one by one. Let em dry so they don't mold then you put it back together.
I just cleaned mine
I dont know how it gets there its so annoying
Mine😅
What you put shampoo in it=)))
WHY DOES THE RS3M GET SO DIRTY SO QUICK, MINE GETS FULL OF DUST IN A FEW DAYS??
Maybe we don't keep it in a clean place haha. I think and I have felt as well that the body feels a bit more friction than other cube and i think attract more dirt and dust due to static electricity
@@nerdycuber yea that makes sense
@@khixrForgorbro just use lube lol
its prob just where you live, my rs3m is my main and it doesnt get dirty until after 3 or 4 weeks
Lube your cube
I agree disgusting cube he really need a lube
What the heck did you put in that cube, cement??
Hahahaha sort of and to be honest I didn’t put it, it got there itself 🤣
Probably the plastic
Yeah, it's normal, even my Rs3m 2021 and Rs3m Super has this problem, lol
hell no its not normal, ive had mine for like 4 weeks and ive never seen this weird ahh powder
Its dry water if you wash your cube that can happen from the friction thats why
Cubistas vendo ele tirar a peça de canto primeiro
bro that is not my cube, that is your cube you know?😅
its pov HAHAHA
Wer is the logo
That is not an rs3 2020
Why just why the corner 😢
I give dis like 😊
Bro im so bad im nine and mi pb is 45 sec
Are you preparing for competitions bro or you do it as a hobby?
@@nerdycuber im preparing for a comp
And now mi pb is 29 secs
Just learn advanced f2l from jperm but not the algs
Bro ye magnetic cube hai?? Plz answer
Yes bro
First Of all Ye Bhai MoYu Use Nahi Karehe He Ye Koi Dusra cube He MoYu Ke White colour me Unka La go hota he
@@ST39xEsTriprOP this is rs3m 2020 magnetic cube bro
@@nerdycuberlogo kaha He?
@@ST39xEsTriprOP bro ye Rs3m hai is bande be logo ko remove kr diya hai mere pass bhi rs3m hai our mene bhi USKA logo remove kr diya