Part1 - DIY IoT based Smart Patient Blood Oxygen monitor with critical medical alerts using Ubidots
ฝัง
- เผยแพร่เมื่อ 30 ต.ค. 2024
- Get 10 PCBs at just $5 from my favorite PCB manufacturer - www.pcbway.com/
Project Page: electronicsinn...
Welcome to Electronics Innovation,
In this video, we are going to talk all about "IoT based Smart Patient Blood Oxygen monitor with ESP8266 and sending critical alerts to the hospital management and patient loved ones" This project is truly designed for patients whose blood oxygen levels need to be monitored 24x7, for example, covid patients or any other patients who are on the ventilator. This project continuously monitors the blood oxygen levels and logs them to the ubidots IoT platform. also, it will send critical medical alerts like voice calls, SMS, EMail, and telegram message to the Hospital management and patient loved ones with the help of Ubidots events and alerts features.
I am so excited about this project. so, without wasting much time let's dive into the episode.
#max30100 #ubidots
=================================================
Subscribe to Electronics Innovation
bit.ly/Electron...
Visit Electronics Innovation.com for more Tutorials, Tips, Projects, and How It Works videos:
electronicsinno...
Follow us on Instagram: / electronicsinnovation
Like my page on Facebook: / electroniczinnovation
~-~~-~~~-~~-~
Please watch: "I AM IRON MAN | DIY Arc Reactor"
• how to make iron man a...
~-~~-~~~-~~-~
I have done it this project and connet with ubidots, I using esp32-DEVKIT V1 Board with using GY-MAX30102 without cut the 4k7 ohm resistor line and sensor DS18B20 (for body temperature).
I have using library VEGA_MAX30102 for MAX30102 monitoring heart rate and spo2 realtime.
for monitoring hr and spo2, you must make some filter maybe you collect 20 beat and send the data to ubidots.
i too excited watching your clip. ookforward towatch other parts
Thank you for the support.
Sir i have followed your process
Bina solding ki run ni hoga kya sir
Nice project
Very good tutorial! I appreciate.
But I have used esp8266 and followed all the steps as you suggested. But I am getting the value 0 for both BPM and SpO2 in the serial monitor. Hence the value 0 is also entering to the ubidots. Could you please help me with this?
Haii bro
I have also getting same values
Can you solved it?
Hello sir
I am doing this project but pulse oximeter is not pushing data so in serial monitor and in ubidots it shows 0 heart rate and 0 oxegen so any solution of this ??? Plz help me in this 🥺🥺
sorry, did you finish it ? I have same problem. for my final project.
Same for me
Me too
Did you got your error resolved?
No
Same for me... Please, help
Estoy usando el Wemos D1Mini ESP8266, D0, D1, D2 son los mismos?
Can i put both the ecg and pulese oximeter in one microcontroller and see the results simultaneously? If yes then how?
Bro any solution?
Hello sir I'm doing this project for my final year but the BPM and spo2 is showing only zero values what should I do now please help me to solve this issue
What are the libraries should installed in Arduino ide
great tutorial!, from Spain, PerulerIot automation
Thanks you so much for the video! I have successfully implemented it.
Im getting only 0 for spo2 pls help me
@@logeshwaran1637 help me too
@@logeshwaran1637 same issue I have carried out this project for my final year.. we have to finish this within 3 days..😭
@@jungcookie7041 PUDISTE RESOLVERLO_
Hi
Great vid
Good video~ But we can not visit your project page??
Its dont connecting wifi .. it still showing wait for wifi but it did not connected.
Hi sir,I have followed the same procedure as you did,but when I uploaded the code I am getting reading 0,0 for both BPM and spo2.
I had used max30100.
But if I upload a code to display value on serial monitor the values are displaying on serial monitor
I'm getting the same error.
How to correct it ?
Where you able to correct it?
@@arimapranjal9894 No
@@shashanksatla7876 did you solve the issue
Hey I'm also doing the same project.
But I'm seeing the error : initailing the oximeter .. failed
Can any one help?
Can I get some help in this IOT project:
Inputs are random health points which are instantaneous and continous
such as (BP, Heart Rate ECG etc.)
Storing all these data points in cloud server and accessing it as well as demanded by services required
for every patient.
Will help you.
Please drop a mail to askus.electronicsinnovation@gmail.com
@@electronicsinnovation hey can you help I'm getting the error initailing the oximeter failed..
Do i have to Desolder the register from max30100 sensor as some videos are showing.
👌👌👌👌
can we get components here in india
Yeah, Available.
I got 0 values for both bpm and spo2 when i try to send them to server. how to solve this issue??
same'
@@EforEngineering i solved the problem
@@crsti2684 how you solve it?
@@crsti2684how bro plz tell???
👍
I tried external resistors of 4.7k ohm but the max 30100 sensor is still not glowing ....pls help
sorry, did you finish it. i have same problem
I believe u also have to remove the onboard pull up resistors before connecting the external 4.7k resistors you can see he has removed those tiny resistors on the module
Had you got the solution?
@@AnkitYadav-wy4qc no I had to manipulate the project
@@Moppybird07 did you removed the register from the oximeter by Desoldering
Please help me...... It's really urgent
Bro code send