Linda, theres no spark at all? i know you feel hopeless but do something to make him feel appreciated. Make him his favorite dish. You look like you cant cook, which is totally fine, order his favorite pizza. who doesnt like pizza!?!?
The lids of most butane cans have 5 different attachments that you can pop out and stick on the nozzle to fit various torches that aren’t the basic size of the cans nozzle. What you’re describing happens to me when the specific butane brands nozzle doesn’t fit my torch.
Bro, you just saved my lighter and my weekend. I was super bummed out because my husband fucked up my lighter and its my favorite one. Turns out the striker just needed to be bent back. Thanks, dude.
What a great video! I wish all videos were as well done as this one is!!! Very well explained. Volume is perfect. Not too long or babbling about nothing. Includes a brief recap. Shows you examples. All of it just great! Thank you
finally someone who knows their shit. Great video. Very well spoken. Addressed the issue perfectly. Thats EXACTLY what I did. I overfilled it and blew out the igniter. So to confirm, if we blow that puss, i mean igniter out, the troubleshooting steps will fix a blown out igniter? seems crazy that a blown out igniter doesn't require a new part. My lighter still lights but only when i have the butane setting on the perfect setting. if the flame power is set too high or too low the flame will not ignite. I will go ahead and try your troubleshooting advice. if it doesnt work i will beat my girlfriend
I’ve watched two of your videos on troubleshooting and they were basically the same. My torch has spark, and butane; however, I can’t hear butane expelling to ignite. I purchased this lighter and used it probably a week. It ran out of butane and I’ve not been able to light it since. I know there is butane in the lighter, a when I press on the nipple, butane expels. I’ve even emptied the tank and refilled it. Still, no gas expelling. Thank you for the time you take in making these videos. Oh yeah! I have the swivel neck scorch torch. I saw the one I have in your other video. Again, thank you very much.
Only thing I don’t agree with is shaking the butane 😂😂😂😂every body knows NOT to do that . Mixes air with it etc you just want fluid going in. And some bigger torches do take longer to fill . I’ve had two scorch torch butane torches that have just stopped lighting themselves pisses me off I’m bouta just get a tank of propane
Been searching forever…my fairly new scorchi lights great…BUT even all the way to low it shoots out like a flamethrower!!!! It’s crazy….i love the lighter and it wasn’t cheap but it is DANGEROUS TO USE
@TGR Supply Hey when I fill my new torch with fluid I noticed it spews out fluid from the valve would that happen to be because it didn't come with an o-ring? Or would the problem be something else?
I have a small torch, Weller brand, model ML100, I haven't been able to use it since I bought it. It came without gas. After a while I charged the gas but the flame came on and then went out immediately. I don't know what the fault could be! The spark works and the spark sticks right where the gas comes out, but I haven't been able to fix it :(
This video was a whole lot of absolutely nothing. There is no correct numerical amount of seconds to fill a torch. Torches come in all shapes and sizes. My Yocan gun shaped torch takes like 6 seconds to fill. I’ve never had a torch that wouldn’t light from being “overfilled”. When your torches reservoir is full, it squirts out and lets you know it’s full. When there’s too much air mixed in, that’s when you get burpee flames that seem to literally have spurts of air coming out with your flame. The little bar that pops out that you can adjust to the “+ or -“ side controls how much butane is being released and how big your flame is. It’s not to adjust pressure. 95% of the time when a torch isn’t lighting, it’s because your flint needs to be adjusted closer to where the gas comes out or because the flint broke off and isn’t there.
You say to hold down canister for no more then 3 seconds.... every torch has a different fuel tank capacity and so to say a set amount of time to fill up a torch is kind of redonkulous. It will all vary on how big the tank on your torch is. If there is not a lot of background noise you will be able to hear to tank being filled. The noise of the fill getting higher pitch the more its filled, then it will come to a steady pitch when full.and even get some back spray. You should be able to learn that pitch and the amount of time it takes after a few fills for said torch. So if you really arent capable of figuring any of this out without this video or my text then i hope this helps
your logic is flawed if you factor in the size of fuel reservoir. Also its been proven shaking butane is worse as it causes more propellent less actual butane. Third one is the spark from the piezo electrical crystal needs a big enough gap to allow butane to fill said gap so the spark can jump across and ignite more efficiently.
I have the same lighter in your demonstration. It’s my second one and actually ordered it online because I liked the first one so much. It goes from no flame to a tiny flame to a 6 inch flame and then completely out. I’ve drained it couple times not and no change. I have to tilt it sideways to get a flame which seems to always be a 2 to 4 inch flame when doing so. Any suggestions?
Dude, I've literally never have LIKED & SUBSCRIBED a video so quickly. I like this guy he has something very special about him and it's not even about the Touch Tips (although the steps and information were helpful) something about this guy I really like.
with the liquid transferring so cold when filling. After a few seconds Holding it in your hand it warms it up. adam's bouncing around faster when warm then cold? Haha jk
Thank you so much it worked exactly right ! follow everything to the exact letter and your torch will be fixed !!! purge all fluid from torch! Make sure ignitor facing down towards strike plate. Shake can of butane and fill counting 1001- 100_ and thats it STOP!!! no more fluid! and it should work it did mine ,thanx again
Why is butane blowing everywhere, but into my torch lighter?? 😮. I'm not 💯 percent sure, but does every butane lighter supposed to have a small rubber band looking thing around the little nozzle, where you fill it with butane? If the answer to that is yes, well, mine is missing and that would make a lot of sense as to why this is happening to me! 😅😢
THANK YOU! I HAVE A TORCH I HAVE HAD FOR OVER 3 YEARS I GOT OFF OF AMAZON IT JUST STOPPED WORKING I DIDNT KNOW WHAT TO DO! FOUND THIS VIDEO AND IT CAME BACK TO LIFE!! THANK YOU!!!!!
very well said, addressed the issues questioned, describing the do's n dont's, and why! easy to follow and very knowledgeable. convincing by proving everything
I appreciate your video! for years iv been putting butane in wrong . my ignitor pin was straight up so i fixed that, but unfortunately i think my old newport zero is done. lol it no longer strikes to ignight , only gas!
That means your butane bottle has the wrong size nipple for your torch. Butane bottles can have a different size nipple from another bottle and torches can have different size valves. Some butane bottles come with little attachments for the nipple so it can fit any sized valve but if you don't have a bottle that came with the different sized nipples you either need to go buy one like that OR you need to figure out whether the nipple is too big or too small for the valve and then buy a butane bottle with a different sized nipple based on what you found out about the size difference on your current bottle and torch valve.
Thank you for these tutorials.. all the way from Hawaii, this is highly informative. Simple. Short. Descriptive and detailed. We'll explained and outright high grade! Thank you!
Do you help with torch issues AFTER already doing all these? I have a jet flame torch that only produces a soft flame and it's driving me crazy!! Help??
I have a question 🙋♂️ lol I was using my crème brûlée torch to heat the glass of my broken dab rig to repair it as I ran out of propane, after a few fills, started shooting balls of flame I never seen before, would this be a condensation issue or potential heat damage, I’m just scared to use it now 😂 there was quite a bit of liquid in when I bled it idk if that helps 😂
Why dont you ever mention no spark?
Linda, theres no spark at all? i know you feel hopeless but do something to make him feel appreciated. Make him his favorite dish. You look like you cant cook, which is totally fine, order his favorite pizza. who doesnt like pizza!?!?
@@My_oh_faceI came looking for the same answer as linda and I was presented with a fire joke, ty
Bro you just saved my entire night
Thank you so much!!! You helped save my $80 dollar Calibri Lighter.. I was holding down my refill cannister too long.. Too much pressure!!! 👍
I don't know how many times I have read hold down the fluid for ten seconds, Thank you!
Don’t listen to them Lol
Thank you. It was the repositioning of the lighter stem for me
I did everything and the butane still sprays out the bottle nossle blowing cold butane all over my hands and my torch still won't fill
Same here!!
The lids of most butane cans have 5 different attachments that you can pop out and stick on the nozzle to fit various torches that aren’t the basic size of the cans nozzle.
What you’re describing happens to me when the specific butane brands nozzle doesn’t fit my torch.
Bro, you just saved my lighter and my weekend. I was super bummed out because my husband fucked up my lighter and its my favorite one. Turns out the striker just needed to be bent back. Thanks, dude.
Same! Lifesaver right here!
This actually worked! Thank you!
Real gangster of you to upload this video 🤝 made my life so much easier
What a great video! I wish all videos were as well done as this one is!!!
Very well explained. Volume is perfect. Not too long or babbling about nothing. Includes a brief recap. Shows you examples. All of it just great! Thank you
finally someone who knows their shit. Great video. Very well spoken. Addressed the issue perfectly. Thats EXACTLY what I did. I overfilled it and blew out the igniter. So to confirm, if we blow that puss, i mean igniter out, the troubleshooting steps will fix a blown out igniter? seems crazy that a blown out igniter doesn't require a new part. My lighter still lights but only when i have the butane setting on the perfect setting. if the flame power is set too high or too low the flame will not ignite. I will go ahead and try your troubleshooting advice. if it doesnt work i will beat my girlfriend
every smoke shop needs a dude like you bro, now its time to fix about 9 torches in the drawer! Thank you man
Awesome vid :D but you always found some gas inside :D
Dam you helped me a lot and probably saved me some real money over time. The money I've spent on them is a lot already. Thank you.
I’ve watched two of your videos on troubleshooting and they were basically the same. My torch has spark, and butane; however, I can’t hear butane expelling to ignite. I purchased this lighter and used it probably a week. It ran out of butane and I’ve not been able to light it since. I know there is butane in the lighter, a when I press on the nipple, butane expels. I’ve even emptied the tank and refilled it. Still, no gas expelling. Thank you for the time you take in making these videos. Oh yeah! I have the swivel neck scorch torch. I saw the one I have in your other video. Again, thank you very much.
Thanks for the video. Just bent my ignitor down a bit ant it fixed my favorite JetLine.
Only thing I don’t agree with is shaking the butane 😂😂😂😂every body knows NOT to do that . Mixes air with it etc you just want fluid going in. And some bigger torches do take longer to fill . I’ve had two scorch torch butane torches that have just stopped lighting themselves pisses me off I’m bouta just get a tank of propane
What do you know about triggering resonance in one of these torch lighter flames?
How do you fix the Diplomat 5-Torch Table Lighter - Gun Metal
Gun Metal? It won't click?
Been searching forever…my fairly new scorchi lights great…BUT even all the way to low it shoots out like a flamethrower!!!! It’s crazy….i love the lighter and it wasn’t cheap but it is DANGEROUS TO USE
@TGR Supply Hey when I fill my new torch with fluid I noticed it spews out fluid from the valve would that happen to be because it didn't come with an o-ring? Or would the problem be something else?
I have a small torch, Weller brand, model ML100, I haven't been able to use it since I bought it. It came without gas. After a while I charged the gas but the flame came on and then went out immediately. I don't know what the fault could be! The spark works and the spark sticks right where the gas comes out, but I haven't been able to fix it :(
This video was a whole lot of absolutely nothing. There is no correct numerical amount of seconds to fill a torch. Torches come in all shapes and sizes. My Yocan gun shaped torch takes like 6 seconds to fill.
I’ve never had a torch that wouldn’t light from being “overfilled”. When your torches reservoir is full, it squirts out and lets you know it’s full. When there’s too much air mixed in, that’s when you get burpee flames that seem to literally have spurts of air coming out with your flame.
The little bar that pops out that you can adjust to the “+ or -“ side controls how much butane is being released and how big your flame is. It’s not to adjust pressure.
95% of the time when a torch isn’t lighting, it’s because your flint needs to be adjusted closer to where the gas comes out or because the flint broke off and isn’t there.
OMG THANK YOU SO MUCH!!! I've thrown so many away
I thought you weren't supposed to shake the butane because of the build up of gases? I could be wrong. Should I be shaking my butane?
You say to hold down canister for no more then 3 seconds.... every torch has a different fuel tank capacity and so to say a set amount of time to fill up a torch is kind of redonkulous. It will all vary on how big the tank on your torch is. If there is not a lot of background noise you will be able to hear to tank being filled. The noise of the fill getting higher pitch the more its filled, then it will come to a steady pitch when full.and even get some back spray. You should be able to learn that pitch and the amount of time it takes after a few fills for said torch. So if you really arent capable of figuring any of this out without this video or my text then i hope this helps
your logic is flawed if you factor in the size of fuel reservoir. Also its been proven shaking butane is worse as it causes more propellent less actual butane. Third one is the spark from the piezo electrical crystal needs a big enough gap to allow butane to fill said gap so the spark can jump across and ignite more efficiently.
Anyone know why I can't fill my torch with butane. Every time I try all the butane just blows right back out at me
I have the same lighter in your demonstration. It’s my second one and actually ordered it online because I liked the first one so much. It goes from no flame to a tiny flame to a 6 inch flame and then completely out. I’ve drained it couple times not and no change. I have to tilt it sideways to get a flame which seems to always be a 2 to 4 inch flame when doing so. Any suggestions?
Can u make a video where you fix the striker itself I hear the difference it now makes like the spring isnt working love your videos❤
Is there an 'optimal' distance between ignitor and steel plate surrounding the steel?
I did everything and it didn’t work. My problem is low flame.
I have a torch that no fuel will come out of, it’s an old one, but I have refilled it and drained it several times. It still won’t work, what do I do?
“Alright, you hear that, there’s not even a hiss when I strike”
-torch lights
What do we do when it is always flowing? Let go of the switch, close the lid, it still flows.
That’s the effective you may have to get a new one
My pressure won’t release when I use a thumb tack to press on it. It’s a kitchen torch
Dude, I've literally never have LIKED & SUBSCRIBED a video so quickly. I like this guy he has something very special about him and it's not even about the Touch Tips (although the steps and information were helpful) something about this guy I really like.
Best explanation ever. I was struggling so much. Thank you. I tried so many other videos
Thank you so much for making this video, my torch is working beautifully, I was over filling
My torch is dual flame, and it's sparking but still not ighting😮💨 where would i posting the spark in this case?
and when doesn't click?? how to fix it? please n thanks!
with the liquid transferring so cold when filling. After a few seconds Holding it in your hand it warms it up. adam's bouncing around faster when warm then cold? Haha jk
Awesome video thanks
Worked for one of my lighters and that is good enough!
Mine has no spark on the igniter is there a way to fix that?
Mine sprays out everywhere
Ya none of that shit worked.
What happens if the sticker isn't stricking
Mine still not working😿
I preciate it gng🔥
How to fi the flame? mine is blooming out 🤷♂️
What does blooming Out mean? Is it fluttering? If it is fluttering you may have overfilled it
Good to shake
Thanks.... Got it now. My Scorch has a Fill window, so i was filming to the Top. Will try these steps again when it empies🤙👍
Thank you so much it worked exactly right ! follow everything to the exact letter and your torch will be fixed !!! purge all fluid from torch! Make sure ignitor facing down towards strike plate. Shake can of butane and fill counting 1001- 100_ and thats it STOP!!! no more fluid! and it should work it did mine ,thanx again
I read dont shake it puts air in gas which is not good?
Butane must be shaken to mix the chemicals, not sure if I answered your question
Why is butane blowing everywhere, but into my torch lighter?? 😮. I'm not 💯 percent sure, but does every butane lighter supposed to have a small rubber band looking thing around the little nozzle, where you fill it with butane? If the answer to that is yes, well, mine is missing and that would make a lot of sense as to why this is happening to me! 😅😢
Cheap torches don't work as stated. Ever. Bought a Davidoff. 10 years later, no problem.
THANK YOU! I HAVE A TORCH I HAVE HAD FOR OVER 3 YEARS I GOT OFF OF AMAZON IT JUST STOPPED WORKING I DIDNT KNOW WHAT TO DO! FOUND THIS VIDEO AND IT CAME BACK TO LIFE!! THANK YOU!!!!!
Thank you for sharing. Fixed my lighter. Really helped
This really helped with my spray can torch thank you so much
U seem like u would b a good boss and I can learn alot
Literally subbed bc of this
LMFAO I like your style 😂
very well said, addressed the issues questioned, describing the do's n dont's, and why! easy to follow and very knowledgeable. convincing by proving everything
Glad it was helpful!
Mine sparks and shoots gas but won't light
Thank you!!!! I was about to chuck it in the trash.
I appreciate your video! for years iv been putting butane in wrong . my ignitor pin was straight up so i fixed that, but unfortunately i think my old newport zero is done. lol it no longer strikes to ignight , only gas!
You have to replace the igniter..eBay search "piezoelectric lighter igniter" and order you some.. usually get 10 for like 5 bucks.
Very informative indeed. my flint and overpressure were issue.
My torch lighter won't empty
Man you remind me of my homie down in Los Angeles. Good shit!
thank you for the time you spent recording this and uploading it. you have saved me haha.
What if the gas won't go into the torch? When I try to fill it just strays but I know for sure it's empty
That means your butane bottle has the wrong size nipple for your torch. Butane bottles can have a different size nipple from another bottle and torches can have different size valves. Some butane bottles come with little attachments for the nipple so it can fit any sized valve but if you don't have a bottle that came with the different sized nipples you either need to go buy one like that OR you need to figure out whether the nipple is too big or too small for the valve and then buy a butane bottle with a different sized nipple based on what you found out about the size difference on your current bottle and torch valve.
Thank you for these tutorials.. all the way from Hawaii, this is highly informative. Simple. Short. Descriptive and detailed. We'll explained and outright high grade! Thank you!
My torch is dual and it's sparkling but still not ighting😮💨
Amazing! Worked!!
Do you help with torch issues AFTER already doing all these? I have a jet flame torch that only produces a soft flame and it's driving me crazy!! Help??
lmk if u find out the reason, my torch is doing the same and just like you it's driving me crazy.
Squirt butane forcefully downwards with normal tip into the lighter jets to clean them out. Do a few cycles, then try.
How can I work for u
THANK YOU
yer the man. thanks
good
Bro… thanks for this video.
My pleasure
thx bro
I have no spark so this video sucks
me wondering how much butane i’ve wasted 😮🥸
Me to me to
Genius! Many Thanks!
I have a question 🙋♂️ lol I was using my crème brûlée torch to heat the glass of my broken dab rig to repair it as I ran out of propane, after a few fills, started shooting balls of flame I never seen before, would this be a condensation issue or potential heat damage, I’m just scared to use it now 😂 there was quite a bit of liquid in when I bled it idk if that helps 😂
Tysm