How to use xp600/Dx11/F1080A in 4 channel
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2024
- 1. YOU HAVE TO SUT DOWN MACHINE
2. Interchange the damper of color cmyk , to make sure at lease has 4 best nozzel active
3. Turn on the machine
4. open Ptool control software
5. Insert password 16753
6. Ename the active Channel to Capital CMYK ( do not care about color order, just mak sure it is same as color installed in dampers) the two lost channel set them as small letter c or m .
7. save and restart the printer and softer
8. open the ptool control software again to check if you set capital letter CMYK well.
All are completed then you can print in perfect color same as 6 channels new printhead.
subscribe for more
I did what you said and it worked, now my question is. What causes the PrintHead channel to get lost?
helo master...can you share xp600 tools ...please...thanks
ស្តាប់បានទាំងអស់តែមិនដឹងថាមេច
I did what you said and it worked, now my question is. What causes the PrintHead channel to get lost?
I did what you said and it worked, now my question is. What causes the PrintHead channel to get lost?
Xp600/Dx11 is broken easilly . Have to use dx5/i3200 for stable quality