How I made my new POV display!
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2023
- POV displays or fan displays are so cute and sometimes it seems weird, in this video you will see how they work and how to make one for yourself.
schematic and PCB are described and you will see how I am assembling the PCB and what problems occurs when i am soldering components.
and also you will learn important points about doing this type of projects.
This video is sponsored by BCBWay.com
You can order the PCB using the link below:
www.pcbway.com/project/sharep...
Link to battery charging video:
• Why you should avoid u...
Direct Link to PCB, Code and Schematics files:
xemc.club/TH-camFiles/Projet...
This channel deserves way more followers. Great job, very well explained. Please continue!
Thank you for supporting me ❤️❤️❤️❤️
Really cool project, plus whatever you present and explain in your channel are awesome and worth learning. Pls keep posting more electronics videos for hobbyists, thank you!
Thank you forwatching, will do!
Love you so much sir, from bangladesh 🇧🇩 ,i really like your teaching technic.
Many many thanks. I like you too my friend ❤️
Great work. Thanks for sharing.
Thanks for watching!
The best and usefull place for learning
Wow, thank you so much❤️
Thankyou for uploading old videos back and we need to see more microcontroller based and diy videos on this channel😊
I will try my best😉
hello! i really like your practical video about capacitors! as a beginner it was very informative seeing them being used in real circuits, not just the theory behind them. could you maybe make a similar video about resistors? i would find it very useful. Thanks a lot and keep up the great work!
Glad it was helpful! Yes it is in my todo list 😉
Thanks!
Thank you so much🌷
Very well made video 🎉🎉🎉
Thank you so much 😀
Thanks sir, for the video, From Bangladesh
You are most welcome
Perfect
Cheers 🍻
If you skip this test you will not know you messed up until you see smoke 😂 cool video
😁
Great job,you can use liquid lead for your psb soldering project
Thanks for the tip!
Sir, please make a video about fm transmitter & receiver. With every component and the connection of circuit.. Please❤
Love from 🇧🇩
Ok I will try
How cool, coincidentally this was my next project! I decided to not use the attiny84 to dedicate to a capacity tester and use the tineyness of it for this type of project. Its like the attiny85 but has more pins, so handy for led projects. Although now im thinking i should just use the w801, it has 7 leds built in, albiet horizontally, you could just spin the development board and boom you got a spinning display! Shortcut. Nah just kidding id rather put real leds on there, and modify it for a bike wheel. But it would be cool to be able to update the message via wifi or bluetooth. That would be next level POV display. Thanks for the inspiration.
Thank you for watching and sharing.
you are great, can you make a video about inductors in circuits as well as you did for capacitors. i would appreciate it
My next video is about transistors. I will make such a video about inductors but I don't know when
Nice project, thanks! So why didn't you use the hot air gun to solder all the components, the IC in particular?
There is no specific reason 🙃
I'm glad I came across this informative channel. Your explanations are thorough and accurate. Thank you. Is it possible to obtain a PC by postal address from you (without components)? I am in Tehran
Thank you so much. Ask Me for PC on an email 👍
Nice job! What if you did this project again with a stepper motor and no hall effect sensor?
That would be cool!👍
💖💖💖💖
❤️❤️❤️❤️❤️
Excelente trabajo. Felicitaciones desde España. Mi like y mi suscripción. Un saludo. ¿Por que no puedo ver los archivos del software y planos eléctricos .?
Excellent work. Congratulations from Spain. My like and my subscription. All the best. Why can't I see the software files and electrical drawings?
Thank you my Spanish friend. All files are available at a link in the description
Sir. Please make a digital thermometer with seven segments to control the temperature of the heater up to 500 degrees Celsius
Will try 👌
I would suggest using epoxy instead of hot glue. For some reason after a while hot glue is not as reliable.
Yeah, i used hot glue because it was easy to use
link is not working
The link has been updated
سلام مهندس تو کد برنامه از خروجی سنسور هال استفاده نکردی یا من نتونستم پیدا کنم
Yes, i have used the sensor in the code.
Look more carefully then you will find that
Thank you so much ❤️❤️❤️❤️
Querria hacer este proyecto con el microcontrolador de Atmel, At89C5115, porque dispongo de una cantidad de ellos. Crees que es posible realizarlo ? Un saludo.
I would like to do this project with the Atmel microcontroller, At89C5115, because I have a number of them. Do you think it is possible to do it? All the best.
Why not?
You just need to write codes for your desired MCU.
@@elewizard The algorithm would be something like this. The magnetic sensor marks the start of a timer that defines how often each row of LEDs refreshes. A memory buffer holds the "mirror" of what is going to be represented on the screen. The timer indicates how often a new row is displayed. The interruption caused by the magnetic sensor is useful the first time to synchronize the screen. But is it necessary once it is initialized? Because with the timer and dividing the screen area into time, I don't see it being necessary. Thank you very much for answering. A cordial greeting from Madrid.
Yeah the algorithm is OK
The sensor is needed to reset the display, not only once in the beginning. Every time the sensor is passing against the magnet, you have to reset the displayed data and start from first row.
By the way. I love Madrid teams, particularly Real Madrid.
@@elewizard I'm from Real Madrid. From which country do you come from? All the best
bought this 10 years ago
Awesome 👍
Hey stack them for a hologram
Good idea 👌
فارسی نصرفید