HOW TO MAKE A BENCH TOP POWER SUPPLY | MADE FROM A COMPUTER ATX POWER SUPPLY
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2020
- Everytime I had to make something with DC Electronics, I used batteries or an ordinary Power Supply from a random Device. I always want to have a proper Bench Top Power Supply. Because i had a Computer ATX Power Supply laying around in my office, I decided to make my own Bench Top Power Supply. It's not really difficult if you have a little knowledge of electronics. If you are not sure what you are doing it's better to not do it. Because electrical current can kill you.
For plans and more, visit my website : www.isimplybuiltit.com
ISBI
PARTLIST (amazon.com / Affiliate) :
Power Converter (Step Down Converter) (5A) :
amzn.to/32K1wOF
Power Converter (Step Down Converter) (15A) :
amzn.to/3jFSkRI
Dual USB Car Charger Socket :
amzn.to/3jzC1pA
Glass Fuse Set :
amzn.to/3juGvgR
Banana Jack Socket :
amzn.to/32XhgOL
Mini Digital Voltmeter :
amzn.to/2CXzHro
Power Push Button :
amzn.to/2Bla1V9
Resistor :
amzn.to/30Ri1Gr
Step Up Converters :
(max. 2A) :
amzn.to/2WI9pAs
(max. 4A) :
amzn.to/2OPwPja
(max. 10A) :
amzn.to/32Jiw7L
Bauteile (amazon.de / Affiliate) :
Spannungswandler (Abwärtswandler) (5A) :
amzn.to/3jxazIM
Spannungswandler (Abwärtswandler) (15A) :
amzn.to/2WMjbla
USB Steckdose :
amzn.to/2Bm5Atg
Sicherungsset :
amzn.to/2ZPAl35
Bananenkupplung :
amzn.to/30zN7SM
Digital Mini Voltmeter :
amzn.to/30DLFhX
Hauptschalter :
amzn.to/2WOsmkW
Widerstand :
amzn.to/32M79My
Aufwärtswandler :
(max. 2A) :
amzn.to/32KhLvh
(max. 4A) :
amzn.to/3hsJIfb
(max. 10A) :
amzn.to/3hqxjs7
----------------------------------------------------------------------------------------------------------------
If you want to support my TH-cam-Channel you can donate here :
www.paypal.me/isimplybuiltit
----------------------------------------------------------------------------------------------------------------
FOLLOW ME ON
INSTAGRAMM :
/ i_simply_built_it
TWITTER :
/ isimplybuiltit
PINTEREST
www.pinterest.ch/isimplybuiltit/
FACEBOOK :
/ isimplybuiltit
-------------------------------------------------------------------------------
#ISimplyBuiltIt #like #comment
-------------------------------------------------------------------------------
DON'T TRY THIS AT HOME :
I am a do-it-yourselfer and this is a private hobby video,
by showing me how to solve special tasks! The video is not an
instructional video and is not intended to be imitated!
That's why : All information and tips without guarantee!
Everyone is responsible for his actions and is responsible
for his own mistakes! For all work, the general observe
occupational health and safety regulations! I do not assume
any liability for damages and injuries!
Best DIY tutorial of ANY I've seen on TH-cam ! The attention to detail is what impressed me first, but then the inclusion of slight mistakes and the corrections taken is what really won me over and makes this a true DIY video.
I love your attention to detail. Must have giving you great pride and personal gratification to see such a project completed. Excellent work.
Amazing and well done. We live in a remarkable time where so many of these components are readily available and affordable.
for viewers: before cutting the molinex connector look for any pin with an additional (usually thinner) wire, and for the orange or brown wire in pin 11/20 or 13/24, these are 'sense' wires and must be connected so that the power supply knows it's working or else it shuts down immediately. Also google the model of your power supply for minimum load(s), some only need 1 amp load on the 5v line, some need 0.5amp on the 3.3v, 5v, AND the 12v lines. The variable stepdown output unit needs a diode on the output to protect against feedback if you use if for battery charging or anything with capacitence/inductance such as a motor. I might also suggest circuit breakers instead of fuses for the 3.3,5,12v lines.
17:34 wiring dia. Great build, thank you for showing your work.
th-cam.com/channels/1zfaGMjbhfpfOi--atjD-g.html Passa da qui!
This is the best ATX to benchtop power supply ever! very well done. Clean and simple.
This is the nicest power supply project I have seen. There are many on TH-cam, but the quality and finish on this one is exceptional.
Came for the power supply and electronic tutorial. He got to the table saw with home made slead for his cuts for his case and I hit subscribe.
Me too
You know what they say about people like you? WOW!!! I'm in awe. You're extremely talented. :) Thanks for sharing
Wow! Such a great build. Love your attention to detail and craftsmanship! Inspiring! Thanks!
Out of all the atx bench power supply builds, I like this one the best 👌
If I can put this simply.
I bloody love this!
I’ve saved one of those power supply units for ages from and old desktop pc because I had an idea that it could be useful when I’m model making or just testing stuff. I haven’t made anything yet because I kept fumbling for ideas on how I’d like to do it so I just kept putting it off. Not any more. That sir is bloody awesome and I’m so happy I subscribed earlier.
One of the most underrated channels on the tube in my opinion.
Good health to you! 🍻
Building the case seems to be the most involved part of the project. You clearly have all the tools and skills needed. I would love to see an overall shot of your workshop!
I've been planning to build an ATX power supply for several months. Of all the designs I've seen, yours is best for my needs and limited space. Well done!
I was sort of thinking...."hey, I can do this"....until 15:20! Thanks for posting. I don't have a 3-D printer, but it offered a lot of good ideas.
Excellent build. I had a bench top supply that I made when I first started with Arduinos. I found that for many projects I needed more than 12 volts, but I rarely needed more than two voltage inputs simultaneously. To keep the footprint small I made mine with two variable outputs using the same modules you used. I made it so I can use a power supply from a laptop or any other type of supply using the same size male jack. The main power supply sits on the floor out of the work area and only the variable control and outputs are on the bench top. Adding multiple female jacks makes it possible to use any supply I happen to have available whether it has a barrel jack like my old Toshiba laptop or a rectangular one like my wife’s Lenovo. I can also use the power supply for my 3D printer or even my model railroad. It is very inexpensive if you shop carefully for the components.
I would love to see a picture of your build!
Outstanding work!!! You sir are a perfectionist!! Thank you for posting this. This is the best ATX power supply build I have seen so far, albeit with a lot more work involved. Be proud of what you have accomplished. Subscribed!!
Your attention to detail is amazing. This is one of the best videos I've seen.
A work of art and such detail, well done!
Great project. Last week I found working ATX power supply on the street and I want to make an adjustable power supply. Your tutorial is the best one I have found :D thank you very much! Amazing work! I'm definitely going to subscribe
The Part list of the Power Supply is now in the Video Description.
That case itself is a work of art, and the rounded edges and color make it look retro!
Got my ham radio license early this year during the virus mess. Since then I have really been enjoying building a radio go box, power distribution box, and a dc power supply. Yours looks very professional. Im OCD, but dont have the equipment you do to 3D print etc.
Your not only an electronic genius your wood working skills are next level as well.
Beautiful Project nice build. Love the design and detail.
Really fantastic work, dude! It really looks beautiful! 😃
That has to be the nicest looking D.I.Y. Power supply from an ATX PSU. Thank you!
Excellent man! A skilled and precise construction. Really enjoyable to watch. Thank you.
Sir you created awesome thing... You are a great experienced man
What a very neat and tidy job! You have made a nice unit. I have several ATX Power supplies in cases of old computers I can't bring myself to throw away, so here's a productive way to use one of them at least. Thank you! Nice job.
The hand holds in your crosscut sled are genius!
Thank you.
I agree, good idea!
You are a true craftsman sir! Thank you for such an intimate, detailed presentation.
I love everything about this video!
Your voice is very calming
You explain every step with extreme detail
It's relaxing to watch you go through all of that wood working
And my favorite, the electronics!
Thank you for making this. It makes me feel like I might be able to build one myself. I am a bit overwhelmed with the hooking up the wiring piece, but I will maybe try it :) I like your channel. Thank you, very nice build!
I really love your work ,this is the most admirable video to watch and gain knowledge.
This is great! I have a bunch of computer power supply units that I intend to use for various purposes, but haven't as of yet. They were removed from computers that were being e-cycled where I also took apart the hard drives and salvaged the magnets from them. This video gives me some good ideas. I don't have a 3D printer, so I'm going to have to do some precision woodworking for the face plate.
I am 70 years old and retired from Tennessee USA. I enjoy your videos more than any others on TH-cam. I’m just starting out trying to learn basic woodworking. You make me wish I would have spent my entire life learning the skills you have. Thank you very much for sharing. Do you have a patron page? I would love to support your work. Thanks again.
I'm glad to hear that. I'm 44 years old now and I also wish I had started this woodworking and handicraft thing when I was younger. But better late than never. I haven't yet a patreon page.
Very nice. this is the best-looking home-built power supply I have seen so far. excellently detailed instruction. This gives me an idea of how I am going to build my next project.
Klasse Video! Anschaulich und SUPER erklärt! ... Danke :)
Very nice and good looking project. Also very glad you didn't use hot glue to mount any critical components and actually properly installed everything👍
Really, really nice job.
What a nice, clean and beautifull work. Best I've ever seen.
Congrats
how come you only have 43k subscribers? your content is amazing!
Nice combined skills project! Well done!
Very nice job.Congrats from Bogatki,Poland.
I had top click - because that might be the best looking PS ever, dude. Nice work.
I love it wish I would known about this a few years back when I threw my old computer out. Thanks
There's a German accent involved. You know it'll probably be better than factory. :)))
After watching I have confirmed that I wasn't wrong. Probably the best ATX PSU conversion on the internet. Such attention to detail and safety is well integrated. +10
The project is well executed and organized.
this build is deff on my bucket list!
Malheureusement c'est pas à la portée de la majorité pour avoir ce genre d'outils.. c'est merveilleux .. c'est un travail minutieux, esthétique et le résultat est une merveille.
Wow ! I'm very impressed by your skills ! A professional workshop on the side may also help to "simply" built this project to perfection.
The most amazing videos from you, really outstanding job😀
Jack of all trades... Nice work.
Really awesome job (as always)
your videos are always very educational and easy to understand
, although it's sometimes is a difficult project you are making.
I have for a long time wanted to make myself a benchtop power supply,
this video will be a very great source of inspiration ... great job
Many many thanks for showing and please keep up the good work ;-)
I am impressed and speachless!
Finally, someone designed it the way I was working towards .... last ???. All 3 separate standard voltages, adjustable up to 24v, and the standby USB connections, wow! VERY NICE JOB showing the build and color connections, etc, excellent! THANK YOU!!!
Simple to do, so long as you happen to have the bits laying around. I'm sure most of us do. In the junk pile in the corner is where I keep my fully equipped workshop with router bench, table saw, 3D printer, etc. Simple things we all have at our disposal..........I really liked the finished product though, Looks really Hi-Tech with all the outputs and the OLED panel at the top. And I REALLY liked the terminal block inside, that made things really neat for a few minutes...before the front panel spaghetti made it's appearance.
A lot people that are actually building their own power supply have this stuff (I do). If you don't, you can use whatever plastic container you want and cut that with a box knife. The box is not the most important bit of this build.
Work of an art....very nice.....Thanks for sharing this with us...appreciated.
Fantastic clean and perfect handmade project
I came for the power supply but loved the wood working saw slide....then the final product. 😊
Super gmacht! Gratuliere! Boris🇨🇭
Nice tidy build, well done! 👍👏👏
well i do love his highly skilled workmanship.
A couple points from an electronic engineer of over 50years skills.
1. I would recommend not having air in and air out on back panel, unless there is some form of horizontal separation barrier sticking back at least 200mm from one side to the other.
I note as other have pointed out there are grills on the back panel situated above the fan outlet grill.
Now if unit is placed with back near a wall or rear of bench with a high back the air will start to recirculate and unit will get hot.
His case is beautifully designed and made, except for this critical thermal flaw.
Look at any type of commercial equipment and you will never see inlet and exhaust placed adjacent to each other.
Further like the desk top computers these supplies are filled to, I would suggest adding a removable filter on any inlet air vent as a major killer of these supplies is both dust (causes electrical arcing in the High voltage DC section of the supply) and overheating.
2nd personally I would have painted the inside of the case with a fire resistant paint or lined it with a thin fire resistant material. But that's me, very safety conscious.
Absolutely brilliant video.
I will do say you have taught me a lot about building in timber.
Plus you mentioned some sort of cad software I had not heard of, that I will look up as I have recently got myself a 3D printer.
Also EXCELLENT graphic schematic showing how to wire unit. I have to ask what did you draw that in please?
Exelente! De primera calidad!! Me gusta!! Tratare de hacerla igual!
Maracaibo Venezuela
Easy, simple and detailed work
Nicely done, very well articulated and documented video. I'm always impressed with your videos and always learn something. Thank you for taking the time to share your projects and ideas.
What adds value to this video presentation os the narration is clear, and the narrator is 'SPEAKING' not just 'Talking'
The Cadence {Speed at which one speaks } is most important.
Most amateur presenters have no idea and speak too fast, like it is some kind of race.
Perhaps they need to go to Toilette.
Speaking too fast does not allow the listener to absorb what is being said
A good presentation is like enjoying a delicious meal. Go slow and enjoy.
__ Grüße an meine Cousins in Essen und Köln
The video is very informative and the whole construction is professional. John from Greece.
th-cam.com/channels/1zfaGMjbhfpfOi--atjD-g.html Passa da qui!
Sehr schöne Arbeit! Mit Liebe zum Detail.
congratulations you have made a superb job of the build.and it looks a very beautiful finish.i wish that my carpentry skills were even as half as good as yours are. all the best my friend.
Nice job! Thanks for sharing and keep up your great work!
Awesome, how I wish to have those tools and the 3d printer, but overall your skills in step by step creative order, great job and congrats from Mexico City
honestly most of the stuff is actually rather easy to build manually. Replace parts with acrylic and MDF/Plyboard wherever necessary and well, it's rather simple. Just some hard work.
Just another level ! Bravo !
That is the coolest thing I’ve ever seen wonderful my friend liked & subbed from 🇬🇧 uk
what a good job you did greetings from Mexico
Nice one! I just built one my self with components I had (from about 10-20 years ago :-) with 15 year old PSU. I did the easy way though and drilled my PSU case and connected everything. It was a really tight fit though as my PSU fan was "silent" and covered the whole top of the PSU.
I do think I will add the buck/boost and as you did though to get the digital volt/current meter with PSU as that would make it almost perfect!
Awesome work! So well made! :)
One of the best videos for bench power supply i watched on youtube. Very detailed work to perfection. I would like to build one of this. Could you post links for the parts you used and if possible the stl files? Thank you in advance.
Excellent case design! I had planned on converting a couple of old ATX power supplies for a number of years now. I am printing out your design right now, I can finally have the finished look I wanted to go for, thank you. I know you have since upgraded your original design, but with the original, you could eliminate the step-up converter for the 12V lighted switch by using one of the power supplies yellow 12V power leads. Thus eliminating the PG connection unless wanting to use it for LED indication or some other 5V connection. The original switch needs 12V for the power indicator light, not for switching.
Very nicely done!
One thing I might do differently concerns supplying more power to the USB socket. The one used is designed for Quick Charge 3.0... It clearly will not be able to do that if all you give it is 5 volts... So, I would use a yellow (12V) wire instead of the 5 volt STB wire. If having a true 5 volt USB output that continues to work when the main switch is off is still important, you can always install another, simpler socket. But to me, spending that much on this particular socket and not using it to its full potential seems like a waste. ;-)
Again, great build!
Cheers from Canada!
That’s a work of art.
You must be a perfectionist. Thumbs up to you.
You gained my subscription for this.
Excellent Sir your all work was outstanding it is very useful power supply in work shop.
you do very nice work I would like to build this it looks amazing although I really don't know what I would use it for keep up the great work
great job, i wish i had the same craftsmanship, I know electronics very well and I also modify a bacterial cell so that it produces colors of all kinds or even insulin, but I'm a failure in terms of craftsmanship
Best ive seen yet. Great job, Great video.
Wow really detailed work...I really like the wiring diagram...it really helps me understanding it this way
I love this modular concept. Simply excellent. Did you know that if you isolate (with simple rubber washers) the output side of the PSU from the case. You can connect 2 PSU's together. Why? To get 24V at much higher amperage than can be given by the blue wire (-12V). There is a video on how to do this, when I find it again I will edit this and show it. I dont know if it works with 3 or more PSU's. This will also give you considerably more voltages varying from any combination of 3.3, 5, and 12 up to 24 (i.e. 3.3+5 = 8.3, or 3.3+12 = 15.3 etc, all at higher amperages that the highest amperage of lowest amperage PSU can handle - which is significantly more than the blue wire and much more useful).
The other reason I like it is because it is much easier to add additional features. Reverse polarity protection for example - which is needed if you want to charge car batteries. I'm going to build one like this. Thanks for sharing.
INCREDIBLE Workmanship. May I offer ONE suggestion?
Instead of cutting ALL of the wires from the Power Supply, get a Power Supply MOLEX connector from a defective motherboard, and solder all your wires to it.
Then you can just use the standard Power Supply output plug to attach to your wiring harness. Someday your Power Supply will FAIL. So when it does, you can simply UNPLUG it and replace it with another in just a few minutes.
I was going to say the same thing. Thats the way I made mine.
That's a good idea. I'll implement this.
An even easier way is you can buy a board of ebay for about $10 that has the molex connector, banana sockets for all voltages, already fused and has an LED and on/off switch. Just plug it in and you're ready to rock'n'roll.
there used to be 24-20 pin converters for using a new power supply with a 20-pin motherboard, on those, wires are already in, so maybe that will be even easier? something like this: www.cableleader.com/6-atx-20-pin-female-to-24-pin-male-motherboard-adapter-cable.html
PaintmanJohn & Eric Livesay - could either (or both) of you *please* explain to me where you obtained your knowledge on this subject matter?? I’m 40 and I’m desperate to learn about ALL THINGS low voltage / DC related, but I’ve got no clue where to start!! I’ve watched SO MANY VIDEOS like this one, from start to finish, and marvel at the amazing achievements & know-how of Numerous creators... I’ve even purchased some basic soldering & wiring kits/equipment and also own & tried to learn several different things like arduino, raspberry pi, and even projects with led bulbs or infrared arrays...
I get started, and then quickly get LOST every time.
I’m also very fond of finding discarded electronics and either fixing them or just breaking them down to see how they look inside... every week I bring home something new, like laptops, TV’s, monitors, radios, etc, which I find ON THE CURB in my neighborhood... I recently broke down a huge Plasma TV and I’m CERTAIN there are valuable components inside of it that could be used in future projects, but since I’m clueless, I’ve stacked up all the boards from all these dismantled items and piled them neatly in boxes... hoping SOME DAY I’ll understand what I’m looking at...
The fact that you guys can watch this video and not only FULLY UNDERSTAND IT, but then offer ADVICE on how to do this BETTER simply blows my mind and frustrates me. HOW DO YOU KNOW???? I would die a happy man if I knew how to build something like this or simply UNDERSTAND what’s being built to the level where I felt I could easily replicate it if I chose to...
Could you guys please explain to me how I can obtain a thorough education & understanding on all things involved here in this video?? You were blessed with this education and had to start somewhere, so please help me.
Cheers!
Wonderful project Angelo from Italy
Very professional build. 😁😁😁
found this in my recommendation as I was looking at PSU's/electronic repair but once I saw the woodworking equipment and the DIY sled w/stop block, push sticks, saw blades holder and even a DIY digital height gauge I hit Subscribe/like right away, look forward to checking out what else you have made.
Same...
great job clean ,elegant,awesome congragulations from istanbul
Very nice build! I have seen many that used an ATX power supply but this one was actually very well designed!
Nice work on the case you made for the supply.
I love it! Great job!
Great build!!
That was excellent my friend 👍
You are an inspiration! Thank you!
Awesome design and build! However, I would think the front bezel needs a port to provide air throughput since the fan in the power supply is drawing negative flow. Too much of a seal in the enclosure will burnout the fan in the power supply as well as creating too much heat from too little air flow thus reducing the life span of the power supply itself. But overall I love it!!
I am thinking that as little load that this PS will probably be under as a Bench PS will be minimal as opposed to being a functioning Computer PS. I think the fan should be fine. In fact, there will be a lot less worry about dust clogging up the fan since it will be primarily be blowing air OUT the fan opening. That would be my only concern. If the fan were blowing IN to the PS instead of OUT, then it might be a problem. Good point though.
Nice build! I just realised I like German accent in English speech! lol :O
[ ]► Frank´s German Ford Crown Victoria Police Interceptor.....has gone :-(
th-cam.com/video/klve5-XZoUU/w-d-xo.html