I took a 1/2" file and slid it into each aluminum slot and filed off the BURS on the top of each screw hole so they don't interfere with the sliding of the bolt heads.
Thanks for your review. I had just ordered the older white model and then I saw your review. I quickly cancelled the order and ordered the new one. So glad I saw your review - I didn't realize there was a new model that fixed many of the short-comings of the older one.
You’ll be much happier with the newer one. I’m in the middle of building two wooden model ships and I use it often! Nice work surface for detail work. Thanks for taking the time to share.
Absolutely! My son builds a lot of accessories for his woodworking shop, but we both purchased this table. Still love it and use it regularly. Thanks for watching and taking the time to comment!👍
My drill press is literally waiting for me to take it into the garage. I was looking at the older version DPA2412T as an add on, but for $5 more your review has convinced me to go with the newer DPA2513. Very nice review and for anybody considering the older version the 2 cons were the taller back and the channel for the block. You addressed those problems, plus the handle. Thanks again.
Great. You’ll be much happier with this newer version. I’m still very pleased with mine. Thanks for watching and taking the time to share positive feedback.👍👍
Yes, but you can make your own that fit perfectly. I think I show it in the video…. But note; I showed the wrong tag at Menards…. So just make sure you get the correct width and depth. I’ve got the specific info for it at home. Unfortunately I won’t be there until next week…. If you need it, just make a new comment next week and I will respond. Thanks for watching and taking the time to comment.👍
I’m very happy with mine too. I mostly use it for very small ship modeling crafting and it’s preformed great. Thanks for watching and taking the time to comment 👍
Regarding the insert, you made the comment eventually, but I'll reiterate it: Save the insert as a template. Go ahead and use that to make a few replacements on your table saw as soon as you get the insert out the box! Additionally, you can experiment with making a "breathable" version (i.e., a few large-bore holes) so dust collection can happen on both sides and won't strain your vacuum in the process.
Good points! Thanks for contributing to the conversation. I regularly use the table in wooden model ship construction using micro drill bits. Very happy with my decision. Thanks for watching too! 👍👍
Thanks for the review. I have the same model setup and it performs very well for me as a DIY’r. I bought b/c it couldn’t be made for the cost of the parts. The stop block feature is great. Thanks for the tip on the replacement plug. BTW: the Wen drill is a keeper as well. I looked at every other brand for similar money and Wen is just a better quality press with more features.
Thanks for watching. On the replacement plug, I accidentally show the wrong size…. So be sure to measure and the correct one is on the shelf next to the one that I showed. Thanks again.👍
You’re welcome. I don’t use it often but it’s very useful for my needs. I’ve been building wooden model ships and it has been well worth the investment! Thanks for watching 👍👍
Thanks Dan. Great looking product. I just ordered one myself ( new project requires drilling thru 2" round dowel - this will be great) Maybe mask off ruler and spray with clear coat ???
Not sure regarding spraying with clear coat as it’s at the same height as the table. They should have slightly recessed it! But all in all, it’ll work great for a work surface and holding your work in place. The price is less than half of what other similar products are. My son tried building one and thinks the WEN I have is a better choice! I think you’ll like it. I just posted another Pearl video…. I made a construction error: I used the wrong stairway spindles 😫…. I need your attention to details!👍
I found a better replacement for the inserts that are perfect use laminated flooring samples from the big box store they have a vinyl surface on both sides and the thickness is spot on plus they are free I just have to cut to size
Great suggestion! I didn’t know that they would be the right thickness. Thanks for sharing. Next time I need some more I will try it out….. unless they are all gone do to your suggestion!😂😂👍
Glad you asked! I made a slight error in the size: It’s 3/8x4x36 specifically item number 1031544 select pine board. At my local Menards it was in the upper deck of lumber. Here’s a link to the website and the piece that you need: www.menards.com/main/building-materials/lumber-boards/boards/3-8-select-pine-board/1031544/p-1568183358116-c-13115.htm?searchTermToProduct=1031544
My wen table must be the older version you mentioned. I received it today, 9/29/2022 and it does not fit the Wen drill press I received yesterday, 9.28.2022. I will have to drill a couple of holes into the table in order to secure it to the drill press table. Oh, my table is the white table....
Yes, that’s apparently one of the improvements made in the orange version? I’m still happy with mine as it easily clamps off and on. Thanks for watching, sorry yours isn’t working out quite as you wanted.
Yes, I did change out the chuck. I mostly use micro drill bits so I didn’t even try the one that came with it. It took a while to get the hang of tightening the new one, but I’m happy with it! Here’s a link to the one I purchased: WEN DPA167H Heavy Duty JT33... www.amazon.com/dp/B08R7V5B19?ref=ppx_pop_mob_ap_share Thanks for watching 👍
I ordered it separate. It’s supposed to be very stable? Here’s a link to the one I purchased from Amazon. It took some getting use to, but is working well for my needs. WEN DPA167H Heavy Duty JT33... www.amazon.com/dp/B08R7V5B19?ref=ppx_pop_mob_ap_share It takes practice to get the bit centered. I like it being keyless!
Unfortunately for me, the fence cracked where the t-track with the stop is. had to throw it away. Put a Temu aluminum fence to replace it. Kept the stop, though.
That’s disappointing. Wondering if one could be made out of solid wood? I use mine regularly, but not so much with the fence. Drilling with micro bits for model ships… it’s all pretty little duty. Thanks for sharing, it’ll be helpful for others 👍👍
Dan, I am interested in purchasing one of these but it’s important that that fence be fairly accurate at a 90° angle, due to what I am drilling into. Can you confirm? Thanks
Currently I’m on vacation and won’t be able to confirm the 90* angle for a couple of weeks. I’ll do my best to remember….but if you haven’t gotten a follow up from me by the first week of March, send me a reminder!
Let me mention that the table attaches to the metal platform of the drill press. The metal platform of the drill press is what tilts….. But if you’re referring to a true 90* for just the fence on the table (which now I suddenly think I know what you’re asking 😁)…. The table connects to the fence on the two rails so you can put a square on it to get a very good 90* degree. As far as the 90 from how the fence sits on top of the table, I’m very confident that it would be very accurate….. but I will confirm that when I get home.👍
Menards: It was in the top area of the lumber section. 3/8 x 4 x 3' Select Pine Board (Actual Size 3/8" x 3-1/2" x 3') Model Number: 1031544 Menards ® SKU: 1031544 NOTE:BE SURE TO GET THE 4” WIDE ONE. Not 3” that shows on screen. Let me clarify: If you go to Menards online, when you enter the model or sku number it will bring up the the item but down where you select how many there is a drop down tab. You’ll need to tap that and pick the 4” wide one. You can also take those numbers into the store and give it to the customer service help and they can take you right to them. Thanks for watching! My apologies for not being clear on the topic in the video. 👍
I haven’t tried yet. I’m usually drilling very small holes in wooden model ships with little debris. If I want the shop vac to pull away chips or dust I just clamp the hose close by. Sorry I haven’t pursued it more. Thanks for watching 👍👍
I’m adding a follow up to my reply…. I’ve been using the drill table quite a lot recently and I really like it! I’ve done micro drilling on some wooden tall ships and it makes the repetitive holes accurate and duplicates are exact! Regarding the shop vac adapter, it’s easy to clamp the hose on and off so I still don’t see the need for my use…. But as for the table itself, the more I use it, the more I like it! Definitely worth the $50!
If you can carefully cut the sides including the metal channels I don’t see anything that would be an obstacle. I just looked at mine and measured the 4 inches in on both sides. Nothing to prevent it. It’ll just be less wide.
It comes with one. Over time it’ll just have holes drilled in it. So actually, you don’t need to replace it. Just a little update: I use it often in model ship building. Still love it!
Just to support what ever it is that you are drilling into. For example, I drill very tiny holes using micro drill bits. So if there’s a large hole underneath a small piece that I’m drilling It can effect the drilling process. Micro bits break apart very easily and any tilt and they snap off. If you are only drilling larger objects, it’s probably not needed. Thanks for watching my video. 👍
Have you or anybody reading this found a simple way to add a spindle/ motor speed control? Nobody really messes with the 5 pulleys. It would be great to set it to one speed and then use something to dial in your speed. Thanks.
I can’t help you with that. We’ll have to rely on viewers to respond. I only use mine for light duty wood projects on my model ship building hobby and only use it on one speed. Thanks for watching and I hope this platform works to get the answer you need. 👍👍
The new wen model 12 inch has variable speed. There's a lever on the left side and it has only one pulley, I never have to go up there. It is very nice.
Thanks @nick for your input. And John n, fortunately for me I rarely change the speed. Maybe someone else will know how to regulate the motor speed without upgrading to a different model drill. Thanks to all for watching and joining the conversation 👍
I wonder if you contacted the company if you can get a couple more? They responded right away to a question I had. I’ve not really had a need for more. I’m still very happy with it! Thanks for watching 👍
I wrote the company GREAT NEWS! They are on their way! Actually within the next few weeks. Below is the response I received in the same day I sent in the question! ………………………………………, Hi Dan, Thanks for writing in, That's so cool! Send that video my way I would love to check it out. We should have these back in stock by the end of the month maybe early next month. Thanks, Frank
Amazon now has them in stock: Link: WEN DPA2513 24-by-12-Inch Drill Press Table with an Adjustable Fence and Stop Block www.amazon.com/dp/B08NWKVRKZ/ref=cm_sw_r_cp_api_glt_i_5DVWTHJWNP1AF9MMK6TV Unfortunately they about $10 higher but I still would buy one!
Another option-Directly from WEN! It’s about $53.00 and free shipping! Link: wenproducts.com/products/wen-dpa2513-24-by-12-inch-drill-press-table-with-an-adjustable-fence-and-stop-block
Yes, both WEN AND Amazon were out of stock for a time. I even contacted WEN via their website and they responded quickly advising the new shipment had just arrived. Apparently it’s a popular add on! A very good price and you don’t have the hassle of making one from scratch! Unless you enjoy the journey….😉. Thanks for watching and taking the time to inform everyone it’s back in stock!👍👍
Harbor Freight used to sell these for 20 bucks. I recommend this to every woodworker.
Very handy for my small woodworking projects. Very happy with it. Thanks for watching and adding in your support 👍👍
I took a 1/2" file and slid it into each aluminum slot and filed off the BURS on the top of each screw hole so they don't interfere with the sliding of the bolt heads.
Although I use the drill and table I haven’t used the slide clamps much. But I will definitely check out your idea! Thanks for the advice 👍👍
Thanks for your review. I had just ordered the older white model and then I saw your review. I quickly cancelled the order and ordered the new one. So glad I saw your review - I didn't realize there was a new model that fixed many of the short-comings of the older one.
You’ll be much happier with the newer one. I’m in the middle of building two wooden model ships and I use it often! Nice work surface for detail work.
Thanks for taking the time to share.
Thanks for the thorough review!
You’re welcome. I’m still liking and using it!👍👍
I was already looking at this table because it was cheaper to buy than build. Then it was in sale for $45. Easy decision and well worth it.
Absolutely! My son builds a lot of accessories for his woodworking shop, but we both purchased this table. Still love it and use it regularly.
Thanks for watching and taking the time to comment!👍
My drill press is literally waiting for me to take it into the garage. I was looking at the older version DPA2412T as an add on, but for $5 more your review has convinced me to go with the newer DPA2513. Very nice review and for anybody considering the older version the 2 cons were the taller back and the channel for the block. You addressed those problems, plus the handle. Thanks again.
You’re very welcome! Thanks for taking the time to share your thoughts. 👍👍
Great review. Glad I found it...almost bought the old one!
Great. You’ll be much happier with this newer version. I’m still very pleased with mine.
Thanks for watching and taking the time to share positive feedback.👍👍
I bought one. I’m pleased with it. I wish they made replaceable well covers. Thanks for posting the home made wellcover.
Yes, but you can make your own that fit perfectly. I think I show it in the video…. But note; I showed the wrong tag at Menards…. So just make sure you get the correct width and depth.
I’ve got the specific info for it at home. Unfortunately I won’t be there until next week….
If you need it, just make a new comment next week and I will respond.
Thanks for watching and taking the time to comment.👍
I have the same model drill press. I just received my table today. I just put it together. Now I’m looking forward to using it.
I’m very happy with mine too. I mostly use it for very small ship modeling crafting and it’s preformed great.
Thanks for watching and taking the time to comment 👍
Regarding the insert, you made the comment eventually, but I'll reiterate it: Save the insert as a template. Go ahead and use that to make a few replacements on your table saw as soon as you get the insert out the box! Additionally, you can experiment with making a "breathable" version (i.e., a few large-bore holes) so dust collection can happen on both sides and won't strain your vacuum in the process.
Good points! Thanks for contributing to the conversation. I regularly use the table in wooden model ship construction using micro drill bits. Very happy with my decision.
Thanks for watching too! 👍👍
Thank you
You’re welcome! I just used it this morning 😂 I’m still very happy with it 👍
Thanks for the review. I have the same model setup and it performs very well for me as a DIY’r. I bought b/c it couldn’t be made for the cost of the parts. The stop block feature is great. Thanks for the tip on the replacement plug. BTW: the Wen drill is a keeper as well. I looked at every other brand for similar money and Wen is just a better quality press with more features.
Thanks for watching. On the replacement plug, I accidentally show the wrong size…. So be sure to measure and the correct one is on the shelf next to the one that I showed.
Thanks again.👍
Very nice review. I just purchased the same one.
Thanks! I’m still very happy with mine as I’m sure you will be too.
I appreciate the positive feedback.
👍👍
Thanks!
You’re welcome. I don’t use it often but it’s very useful for my needs.
I’ve been building wooden model ships and it has been well worth the investment! Thanks for watching 👍👍
Good review
Thanks. I’m still very happy with it. I do mostly very small drill projects and it works great for my needs.
Great video, do more. .I just brought one one it..Pam
Thanks! I use it often. Much better than the metal platform of the drill press. Thanks for watching and taking the time to comment 👍👍
Thanks Dan. Great looking product. I just ordered one myself ( new project requires drilling thru 2" round dowel - this will be great)
Maybe mask off ruler and spray with clear coat ???
Not sure regarding spraying with clear coat as it’s at the same height as the table. They should have slightly recessed it! But all in all, it’ll work great for a work surface and holding your work in place. The price is less than half of what other similar products are. My son tried building one and thinks the WEN I have is a better choice! I think you’ll like it.
I just posted another Pearl video…. I made a construction error: I used the wrong stairway spindles 😫…. I need your attention to details!👍
I found a better replacement for the inserts that are perfect use laminated flooring samples from the big box store they have a vinyl surface on both sides and the thickness is spot on plus they are free I just have to cut to size
Great suggestion! I didn’t know that they would be the right thickness.
Thanks for sharing. Next time I need some more I will try it out….. unless they are all gone do to your suggestion!😂😂👍
Enjoyed your video. Thanks. I think that you mentioned a link to the wood you used to make replacement inserts but I cannot find it. Help!
Glad you asked! I made a slight error in the size:
It’s 3/8x4x36 specifically item number 1031544 select pine board.
At my local Menards it was in the upper deck of lumber.
Here’s a link to the website and the piece that you need:
www.menards.com/main/building-materials/lumber-boards/boards/3-8-select-pine-board/1031544/p-1568183358116-c-13115.htm?searchTermToProduct=1031544
@@BoilerDan1 Thank you.
My wen table must be the older version you mentioned. I received it today, 9/29/2022 and it does not fit the Wen drill press I received yesterday, 9.28.2022. I will have to drill a couple of holes into the table in order to secure it to the drill press table. Oh, my table is the white table....
Yes, that’s apparently one of the improvements made in the orange version? I’m still happy with mine as it easily clamps off and on.
Thanks for watching, sorry yours isn’t working out quite as you wanted.
Did you change out the chuck? Just got mine and it has play in it, wondering if you had the same issue.
Yes, I did change out the chuck.
I mostly use micro drill bits so I didn’t even try the one that came with it.
It took a while to get the hang of tightening the new one, but I’m happy with it!
Here’s a link to the one I purchased:
WEN DPA167H Heavy Duty JT33... www.amazon.com/dp/B08R7V5B19?ref=ppx_pop_mob_ap_share
Thanks for watching 👍
@@BoilerDan1 thank you
What chuck are you using on the drill press?
I ordered it separate.
It’s supposed to be very stable?
Here’s a link to the one I purchased from Amazon.
It took some getting use to, but is working well for my needs.
WEN DPA167H Heavy Duty JT33... www.amazon.com/dp/B08R7V5B19?ref=ppx_pop_mob_ap_share
It takes practice to get the bit centered. I like it being keyless!
Unfortunately for me, the fence cracked where the t-track with the stop is. had to throw it away. Put a Temu aluminum fence to replace it. Kept the stop, though.
That’s disappointing. Wondering if one could be made out of solid wood?
I use mine regularly, but not so much with the fence. Drilling with micro bits for model ships… it’s all pretty little duty.
Thanks for sharing, it’ll be helpful for others 👍👍
Dan, I am interested in purchasing one of these but it’s important that that fence be fairly accurate at a 90° angle, due to what I am drilling into. Can you confirm? Thanks
Currently I’m on vacation and won’t be able to confirm the 90* angle for a couple of weeks. I’ll do my best to remember….but if you haven’t gotten a follow up from me by the first week of March, send me a reminder!
Let me mention that the table attaches to the metal platform of the drill press. The metal platform of the drill press is what tilts…..
But if you’re referring to a true 90* for just the fence on the table (which now I suddenly think I know what you’re asking 😁)….
The table connects to the fence on the two rails so you can put a square on it to get a very good 90* degree.
As far as the 90 from how the fence sits on top of the table, I’m very confident that it would be very accurate….. but I will confirm that when I get home.👍
@@BoilerDan1 Thanks so much!
where did you get the piece of wood?
what store?
Menards:
It was in the top area of the lumber section.
3/8 x 4 x 3' Select Pine Board
(Actual Size 3/8" x 3-1/2" x 3')
Model Number: 1031544 Menards ® SKU: 1031544
NOTE:BE SURE TO GET THE 4” WIDE ONE. Not 3” that shows on screen.
Let me clarify:
If you go to Menards online, when you enter the model or sku number it will bring up the the item but down where you select how many there is a drop down tab. You’ll need to tap that and pick the 4” wide one. You can also take those numbers into the store and give it to the customer service help and they can take you right to them.
Thanks for watching! My apologies for not being clear on the topic in the video.
👍
Were you able to locate a shop vac adapter for this?
I haven’t tried yet. I’m usually drilling very small holes in wooden model ships with little debris.
If I want the shop vac to pull away chips or dust I just clamp the hose close by. Sorry I haven’t pursued it more.
Thanks for watching 👍👍
I’m adding a follow up to my reply….
I’ve been using the drill table quite a lot recently and I really like it! I’ve done micro drilling on some wooden tall ships and it makes the repetitive holes accurate and duplicates are exact! Regarding the shop vac adapter, it’s easy to clamp the hose on and off so I still don’t see the need for my use…. But as for the table itself, the more I use it, the more I like it! Definitely worth the $50!
Length is longer than what would work best for me. See any reason why I couldn’t reduce the width by about 4” on each side? Dan
If you can carefully cut the sides including the metal channels I don’t see anything that would be an obstacle. I just looked at mine and measured the 4 inches in on both sides. Nothing to prevent it. It’ll just be less wide.
Greatly appreciate your advice and video. Looks like a nice press…will order and make the minor modifications.
Why is the wood insert needed?
It comes with one. Over time it’ll just have holes drilled in it. So actually, you don’t need to replace it.
Just a little update: I use it often in model ship building. Still love it!
@@BoilerDan1 I mean, what is the purpose of it?
Just to support what ever it is that you are drilling into. For example, I drill very tiny holes using micro drill bits. So if there’s a large hole underneath a small piece that I’m drilling
It can effect the drilling process. Micro bits break apart very easily and any tilt and they snap off.
If you are only drilling larger objects, it’s probably not needed.
Thanks for watching my video. 👍
Have you or anybody reading this found a simple way to add a spindle/ motor speed control? Nobody really messes with the 5 pulleys. It would be great to set it to one speed and then use something to dial in your speed. Thanks.
I can’t help you with that. We’ll have to rely on viewers to respond. I only use mine for light duty wood projects on my model ship building hobby and only use it on one speed.
Thanks for watching and I hope this platform works to get the answer you need. 👍👍
The new wen model 12 inch has variable speed. There's a lever on the left side and it has only one pulley, I never have to go up there. It is very nice.
@@nickspace6230 It's also double the price. I guess the amount of time you use it dictates the amount to spend.
Thanks @nick for your input. And John n, fortunately for me I rarely change the speed. Maybe someone else will know how to regulate the motor speed without upgrading to a different model drill.
Thanks to all for watching and joining the conversation 👍
Look at the WEN 4214
they should have 4 clamps at table top instead of 2.
I wonder if you contacted the company if you can get a couple more? They responded right away to a question I had. I’ve not really had a need for more. I’m still very happy with it!
Thanks for watching 👍
You can't buy this table anywhere???
I wrote the company GREAT NEWS!
They are on their way! Actually within the next few weeks. Below is the response I received in the same day I sent in the question!
………………………………………,
Hi Dan,
Thanks for writing in,
That's so cool! Send that video my way I would love to check it out. We should have these back in stock by the end of the month maybe early next month.
Thanks,
Frank
Amazon now has them in stock:
Link: WEN DPA2513 24-by-12-Inch Drill Press Table with an Adjustable Fence and Stop Block www.amazon.com/dp/B08NWKVRKZ/ref=cm_sw_r_cp_api_glt_i_5DVWTHJWNP1AF9MMK6TV
Unfortunately they about $10 higher but I still would buy one!
Another option-Directly from WEN!
It’s about $53.00 and free shipping!
Link: wenproducts.com/products/wen-dpa2513-24-by-12-inch-drill-press-table-with-an-adjustable-fence-and-stop-block
Amazon has it
Yes, both WEN AND Amazon were out of stock for a time. I even contacted WEN via their website and they responded quickly advising the new shipment had just arrived. Apparently it’s a popular add on! A very good price and you don’t have the hassle of making one from scratch! Unless you enjoy the journey….😉.
Thanks for watching and taking the time to inform everyone it’s back in stock!👍👍