*PROJECT DURANGED* GETS A DIY PVC SNORKEL, HEADLIGHT FIX, AND A RUSTY FENDER
ฝัง
- เผยแพร่เมื่อ 6 พ.ย. 2024
- In this episode my 2001 Dodge Durango gets a DIY off-road snorkel! Finally I replace the beaten fender with a new rusty beaten fender and HEADLIGHT FIX!!!!!!
The shopping list
amzn.to/2sDW9AB
Make sure to check out my Instagram @MohawkDave555 for the latest updates.
#DIYSnorkel #cheap4x4 #mudtruck
I started forwarding when he started hammering the fender : D
Great job! One quick question: where/ how did you replaced the throttle body to put it facing forward instead of upwards?? I have the 5.9 and faces upwards to the hood 😮
Definitely will do the trick and cheap way to make snorkel. Turn the top pipe towards the front of vehicle to get max airflow when driving slightly pointed down so rain water can't get in.
Like your vid, gave me some ideas! Making my snorkle out of plastic gutter parts, with flex pipe inside fender. Will have sneak exit out of windsheild trim. Think it will be slick!
Ive gotten rid of my 01 durango within the last month for a new jku , but man this makes me miss it ! Amazing trucks , yours is looking good
I'm about to buy a silver 98 with the 5.2 in it. No rust, needs a battery, and the brakes swapped out for the ones already in the back seat for $650!! I will be watching all of your Durango videos. Getting to know the channel a bit.
Good concept. But for appearance, i would have used a flat and black colored plenum going through the back edge of the hood. Even black eves trough.
To avoid body damage, the bracket could be attached to the roof rack. purchased 2002 Durango, 5.9 L. After body shop, I go over it . Install a backup camera and figure how to waterproof the engine for wading. Alternator may have a problem unless CRC waterproof spray protects it..
Looks like the older models silver color on that fender, it had a slightly more beige tint to it. they changed and added a bunch of the colors on the Durango in 2000 and silver in particular is one they changed so it looks brighter on the newer models, probably because it looks nicer.
I agree I think PS2 is an awesome color! I do love that new grey color they have now.
Very interesting way to do the snorkel. Loving it through. It's looking good
Hey Bud , where did you get your front bumper?
Welding the diff will make this crab around every turn. I put a 2003 fender on my 99. Matched real well.
How did you wire in the pod lights with a 3 wire prong headlight clip?
Project is looking good. Think about water proofing the electronics in the engine bay and sealing the doors to keep as much water out when you go deep.
I noticed you switched your headlights? Are you getting rid of those projector style ones? Looking for my 98 dakota
Those are in pieces my friend. They are shot... projectors are gone as I have hungry friends lol.
@@MohawkDaveOffRoadFor sure! Thanks for the reply. Been following this build since the start!🙌😊
Say it with love my friend, say it with Krylon. Black Krylon spray paint.
Matt-Black Fusion!
There may be a more pleasing appearance installed. Consider cutting out the black plastic edging on the passenger side of the windshield. Then install square tubing with flattened profile and transition to round under the hood. The hood would not be cut. adOther
My 99 has antislip rear differential, does yours? If it does get a front lock. I've done some research and I'm going with an Ox Locker.
That sounds like I need to do some research. Thanks for the info. My anti slip is shot.
Those headlights are fuckin dope! Im doing it on mine lol
Do the blinkers still work?
That would be a negative...
Yes absolutely weld the rear diff lol Get both them wheels doing the same thing instead of working against each other!
Damn 1 wheel peel... no thanks
What did you do for turn signals
Nothing. There are none.
Looks amazing brother i love it!
Home Depot Motorsports! haaaahahahhaahhahahhhahahahh! lmfao! good man!
Where’d you get you push start
Just a generic ebay one.
Try and error are required in order to become an expert.👍
Good job 👍👍.
why did dodge have to make it so difficult to remove a dang fender
Dude I have so many question about your Durango bro please hit me back up