Thank you very much for your comments. If the video was helpful you can use the Thanks button to donate small sum and help me make more videos. Thanks 🙏
Thanks for your quick response brother! If I turn the key there is no sound and crank at all! The ventilation and lights and everything is working perfect, the battery is new and strong 77 ah! I was thinking about the starter reader and startmotor? Thanks you! 👊🏾
Can be both, have a look at ScannerDanner videos on how to check bad starter motor with lamp,.if you don't get signal voltage , will be the ignition switch.
Hi, please, when the mine of barrel is broken and rotate the key in second position, turn it self back in first position ? And, do the lights work in first position ?
@@user-jp2ji4lh8r I done that Brough barrel from scrap with keys wud start but then few seconds later it wud cut out car went to scrap yard about 5 mouths ago
And how to remove the lock cylinder when you can't turn the key to position 1, it blocks it halfway just enough to push the lock in and unlock the steering wheel, but it can't go to position 1
After the barrel is removed, there is two plastic bits that hold it in place z you have to squeeze them and it comes right off. On my one they were broken so someone glue it in place and I had to smash it a bit in order to take it off. Don't forget to put the switch back in first when you out everything back together.
Thank you very much for your comments. If the video was helpful you can use the Thanks button to donate small sum and help me make more videos. Thanks 🙏
ممنون از کمکتون
Thank you. Useful video
Dziękuję super pokazane
Thanks good to the point video
Thanks for your comment
Thanks, much appreciated
Thanks for your comment
Good afternoon friend, do you have to remove the whole key barrel? Only to replace the key reader/ignition switch?
Reader - no, ignition switch - i think, yea
Thanks for your quick response brother! If I turn the key there is no sound and crank at all! The ventilation and lights and everything is working perfect, the battery is new and strong 77 ah! I was thinking about the starter reader and startmotor? Thanks you! 👊🏾
Can be both, have a look at ScannerDanner videos on how to check bad starter motor with lamp,.if you don't get signal voltage , will be the ignition switch.
Hi, please, when the mine of barrel is broken and rotate the key in second position, turn it self back in first position ?
And, do the lights work in first position ?
I don't get your first question. Lights work in all positions
Thank you
Possible method of removing the back (black plastic -) back of the power switch
Its on little clips, just needs to be unclipped
Help I've lost both my astra g keys if I buy barrel from scrapped car do I also need to buy immobiliser casing
Immobilizer reader i think you mean. But . it's not going to be enough, you need a computer to match the chip
@@MeFixingEverything so doomed thanks I wont waste my time n money then now i know that keys will have to b coded
@danger1640 No, they don't. You swap chips
@@user-jp2ji4lh8r I done that Brough barrel from scrap with keys wud start but then few seconds later it wud cut out car went to scrap yard about 5 mouths ago
How doo take the other side out ,the tip of the barrel is stuk in the bottom
First take the barrel out , then the ignition switch it self... I think
And how to remove the lock cylinder when you can't turn the key to position 1, it blocks it halfway just enough to push the lock in and unlock the steering wheel, but it can't go to position 1
It's broken, find my other video.
I don't have a key, what should I do?
I don't know sorry
how can i contact you i have a problem about opel.
Write it here in the comments.
That's removing the barrel, how do you remove the ignition switch that your video relates to.
After the barrel is removed, there is two plastic bits that hold it in place z you have to squeeze them and it comes right off. On my one they were broken so someone glue it in place and I had to smash it a bit in order to take it off. Don't forget to put the switch back in first when you out everything back together.
@@MeFixingEverything Thank You, all good now
Are you there
There is not a small hole to put crewdraiwer in so the thing out like that
Have a better look.
Me fixing everything are you still active here?
Yeah, but post a new comment, I only see the first.one
I dont have the key anymore.
Drill the whole thing out.
Have a look.for my other video. I had to drill the safety pin on this one.
@@MeFixingEverything ok thx
Whoever owns that car is a honking spammer 🤣
Hahaha good one
No good. You didn't bother to show the ignition switch (rear of the barrel).
Will do next time
Didn’t work
I have one more video if the barrel is stuck, have a look .
th-cam.com/video/nTKNIYE9LS4/w-d-xo.html