mr wrong way, i would like to file a complaint. i purchased the et max for the bongos, took it out of the box, first thing i do is play the bongo and no sound. now all i can do is ride the stupid thing.
I'm the world's worst critic. But you hit this one out the park. So many gems. I'm glad that you're working with ewheels again. Does that mean all is forgiven, but not forgotten? Those camera angles and timing on your intro is top notch!
I use WPL forkboost lubricant on not just the linkage but also the stanchion bushings, no disassembly required. I notice those bushings have a lot of stiction even though theyre graphite plugged so a bit of lube in those makes the suspension go from taking a few kg to actuate to only requiring a few hundred grams.
Hi Adam ! Mate good to see reviews from You again…. And I agree with You on the theme : producers working with content creators and TH-camrs from EUC community. Just keep doing Your thing. People love Your content and You do give a lot of valuable information and people trust You. Cheers mate ! 🎩
Nice review of the Baticycle!, Hope you decide to try the Patton-S, i know it doesn't have any performance changes, but the weight reduction plus the progressive springs, the improved chassis and all safety inclusions makes it very interesting multipurpose wheel
9:27 Anyone who was paying attention could see your frustration at being used to promote, develop and debug EUCs, while not being acknowledged or remunerated for the service you provide. And it was never MORE obvious than during the nosfet stream, both that you were being used AND taken for granted at the same time. You're a good egg Adam with an honest motivations to grow the EUC community, not just someone willing to exploit others to grow a "business".
I wish all these new suspension wheels had some better protection in the suspension linkage area. If the wheel falls, that zone in the back is super exposed. It seems like multiple simple things can be done to at least pad it up a bit. Its so crucial to the wheels function.
@@greenwave819 I don't have a Leaperkim EUC, but from everything I have seen online they are fairly receptive to issues that are posted by video and always seem to fix it on the next update
Blinking blue led indicates balancing while charging or while riding (passive). Once it's balanced it will turn off. If it's blinking while EUC is off, then it needs BMS firmware update. Also, old BMS firmware doesn't like fastchargers charging close 168v(stock charges to 164-166v). It causes imbalance between L and R packs causing the cell balancing leds to remain on while unit is off.
🤔 If you been following a channel for long enough, you can tell if things start to go off script, free stuff or not. Adam done a ton of work for these companies and community, this is well earned and if anything he should get those units shipped sooner for reviewing 👍
If you’re planning on doing a review of the begode falcon might be good to know it’s not quite ip67. Dropped my falcon upside down in a shallow pond that just about completely submerged it. It had speckles of water inside the cover that did give me issues with the controller and battery distribution board that I’m still working out. But the batteries are completely fine and did not suffer any water ingress. Overall great water resistance but there’s still room for improvement! Also love your videos if their a review or not 🤟
ms. Wrong has to disclose that he got a wheel for free as if it's a bribe but I notice that his reviews always focus on long-term usage because he gets to keep the wheels and it shines a light on real issues with wheels real owners will face.
Fun video great job. I’m confused about the range as you said not for a group ride and 110km is a long ride or are your group rides at a faster pace. One thing i have a concern about is wheel strength having gone through two wheel replacements on my sherman og even though i’m not even talking about jumps or curbs. When I see models from begode or Extreme Bull appear to have the weaker looking wheels.
It might have been a safe switch for an idle overcurrent. I didn't get an explanation from Begode but I got told by a member of the community that this prevents the board from damage due to a slow overload current for exam e like when you push a wheel against a wall
Ok just want to say use wd40 silicon on the pedal dihedral plate it creaks from the metal being pressed onto the hanger... Simple fix annoying but I found it
What happened to the Oneride partnership? Last time you said your interests don't align with MyEWheel anymore and they do more with Oneride, now you changed back - what's happening? I'd appreciate a little bit more information for the sake of transparency 👍
Hey, we couldn't come to an agreement regarding the continuation of the coop with OneRide. Changes came up during the cooperation. We left on good terms though. In terms of MyEwheel, they're now investing more into their cooperation with creators and riders. We could get an agreement in terms of the coop too. They are also super thorough in terms of all legal stuffs of importing wheels and providing continued customer support which is very important to me. I know it's all a bit vague but I think that's as deep as I can go.
please drop it from the hill, let it roll 10 meters, if it survives after that then it will be a signal that the developers have at least started to move
Nosfet is a dead end... Failed in every way.. I originally thought it was going to be a better version of the lynx it turned out to be a complete pile of trash😂
It's failed the teeth broke they had to make a harnened version itl break again too much pressure possibly... One off pedals they'll fail... I like the front halos but I'm sure they're brittle and won't take impact. The fact there's no LEDs trolley handle or seat means it's unfinished... They may say it's not meant for that but then why not include anyway for convenience or at least give the option@@csai5763 lastly it's priced like it's something special... It's a kingsong s22 at best... Failed
why keeping on beating up leaperkim Adam you chose to be in bed with their competition and then you wonder why they ghost you. can't have everything sometimes
mr wrong way, i would like to file a complaint. i purchased the et max for the bongos, took it out of the box, first thing i do is play the bongo and no sound. now all i can do is ride the stupid thing.
Wow, that intro was A+!
THANK YOU! I worked hard on it!!!
I'm the world's worst critic. But you hit this one out the park. So many gems. I'm glad that you're working with ewheels again. Does that mean all is forgiven, but not forgotten?
Those camera angles and timing on your intro is top notch!
Great review, a nice insight into the trial run for the X-Way hardware, cannot wait for the 168V X-Way review.
YES, FINALY! I've been waiting forever for this, and that was a great review my dude!
Cheers! I'm happy you've been patient!
I use WPL forkboost lubricant on not just the linkage but also the stanchion bushings, no disassembly required. I notice those bushings have a lot of stiction even though theyre graphite plugged so a bit of lube in those makes the suspension go from taking a few kg to actuate to only requiring a few hundred grams.
Hi Adam !
Mate good to see reviews from You again….
And I agree with You on the theme : producers working with content creators and TH-camrs from EUC community.
Just keep doing Your thing.
People love Your content and You do give a lot of valuable information and people trust You.
Cheers mate ! 🎩
Nice review of the Baticycle!, Hope you decide to try the Patton-S, i know it doesn't have any performance changes, but the weight reduction plus the progressive springs, the improved chassis and all safety inclusions makes it very interesting multipurpose wheel
9:27 Anyone who was paying attention could see your frustration at being used to promote, develop and debug EUCs, while not being acknowledged or remunerated for the service you provide.
And it was never MORE obvious than during the nosfet stream, both that you were being used AND taken for granted at the same time.
You're a good egg Adam with an honest motivations to grow the EUC community, not just someone willing to exploit others to grow a "business".
Do you play the drums?
No, I ride them
It's Electric Drumicycle
I wish all these new suspension wheels had some better protection in the suspension linkage area. If the wheel falls, that zone in the back is super exposed. It seems like multiple simple things can be done to at least pad it up a bit. Its so crucial to the wheels function.
So the legendary Tyson can't beat a TH-camr and Adam is reviewing an EUC and going over 30km/h? The world has never been more upside down.
Tyson didnt lose, he got payed 20 mill and the youtuber didnt get anything close to it. Watch replays Tyson did pull punches.
@@pacochawa2746 What country are you in that you are so literal and don't have a sense of humor ?
Throwing shade at Nosfet!! Nice!!
Great video Wrong Way! I'm a begode FanMan! Keep informing us Sir.
You march to a different drummer and I will always prefer your tune. Thanks Adam, you're the best, no one else is close. 6 pac Gord
You are not the average rider... I reported a firmware issue to Begode and never got a response
try reporting to leaperkim, it is much worse
Not sure how it could be worst than no response... Lol
@@greenwave819 I don't have a Leaperkim EUC, but from everything I have seen online they are fairly receptive to issues that are posted by video and always seem to fix it on the next update
Testing pre batch and new wheels, did you never want to purchase a airbag jacket?
What the song that plays at 2:45?
Blinking blue led indicates balancing while charging or while riding (passive). Once it's balanced it will turn off. If it's blinking while EUC is off, then it needs BMS firmware update. Also, old BMS firmware doesn't like fastchargers charging close 168v(stock charges to 164-166v). It causes imbalance between L and R packs causing the cell balancing leds to remain on while unit is off.
Thanks for your insight!
🤔 If you been following a channel for long enough, you can tell if things start to go off script, free stuff or not.
Adam done a ton of work for these companies and community, this is well earned and if anything he should get those units shipped sooner for reviewing 👍
If you’re planning on doing a review of the begode falcon might be good to know it’s not quite ip67. Dropped my falcon upside down in a shallow pond that just about completely submerged it. It had speckles of water inside the cover that did give me issues with the controller and battery distribution board that I’m still working out. But the batteries are completely fine and did not suffer any water ingress. Overall great water resistance but there’s still room for improvement! Also love your videos if their a review or not 🤟
Ok thanks for the info! Hope it goes back up and running soon!
Fast, comfortable, and not far is a perfect commuter wheel.
ms. Wrong has to disclose that he got a wheel for free as if it's a bribe but I notice that his reviews always focus on long-term usage because he gets to keep the wheels and it shines a light on real issues with wheels real owners will face.
Every monkey'd like to be
In my place instead of me
'Cause I'm the king of bongo, baby
I'm the king of bongo bong
I like this Batman Savage Wrong Way era. Make EUC cool again
Oh shit which era were we dorks, I missed it
Fun video great job. I’m confused about the range as you said not for a group ride and 110km is a long ride or are your group rides at a faster pace. One thing i have a concern about is wheel strength having gone through two wheel replacements on my sherman og even though i’m not even talking about jumps or curbs. When I see models from begode or Extreme Bull appear to have the weaker looking wheels.
What’s is your helmet brand? It looks sooo cool!
It's a Caberg Ghost :)
ET Max my beloved
does it have more torque or top acceleration than the Sherman L?
Totally agree regarding the company communication importance. Great mindset 🤙🏻 And great review! Such a big wheel tho lol
Thanks for watching! :)
8:49 A random cut out? No explanation? Is that the motherboard or is it a Begode thing?😮
It might have been a safe switch for an idle overcurrent. I didn't get an explanation from Begode but I got told by a member of the community that this prevents the board from damage due to a slow overload current for exam e like when you push a wheel against a wall
0:40
Me when my schizophrenia medications wear off
the camera is a dji pocket 3, right?
Yes :) some shots are dji osmo action 4
how does the ride feel compare to sherman L ?
Sherman-L is bouncy but better for smaller bumps. I think all in a i prefer the ET Max suspension
Love that helmet! What is it? I gotta get me one! That ET Max is KILLER!
It's a Caberg Ghost! And yes agree it's a killer wheel :)
It's actually a really nice looking helmet
It does look cool
I've never seen a helmet that lifts open like that before, chin area and all
Ok just want to say use wd40 silicon on the pedal dihedral plate it creaks from the metal being pressed onto the hanger... Simple fix annoying but I found it
1:05 - practice creates a champion :o
Thx! Getting there :)
The drumss hahahahaha great video!
What happened to the Oneride partnership? Last time you said your interests don't align with MyEWheel anymore and they do more with Oneride, now you changed back - what's happening? I'd appreciate a little bit more information for the sake of transparency 👍
Hey, we couldn't come to an agreement regarding the continuation of the coop with OneRide. Changes came up during the cooperation. We left on good terms though. In terms of MyEwheel, they're now investing more into their cooperation with creators and riders. We could get an agreement in terms of the coop too. They are also super thorough in terms of all legal stuffs of importing wheels and providing continued customer support which is very important to me. I know it's all a bit vague but I think that's as deep as I can go.
@mr_wrongway
I understand, thank you.
ET max is king of EUc its still on a completely different level to anything else
Cool video!
What kind of range are you getting?
110km it's at the end of the video :)
I consistently get only 40 miles riding quickly
@@markricharddavies same
A 30 min bongo review with no bongo solo was wheely disappointing. ❤
So you need MORE BONGO?
@@mr_wrongway BEGOOOOODE BEGODE !! OH ! OH ! BEGOOOODE !!
yes.
🔥🔥🔥
🔥🔥🔥
please drop it from the hill, let it roll 10 meters, if it survives after that then it will be a signal that the developers have at least started to move
You should start reviewing kettle bells . It's what everyone single person wants to see ....
I'll do so!
You make me laugh!
That makes me happy!
Any Black Friday deals from Begode? Inmotion v13 pro 1999.00 currently, is unbeatable price.
I guess you have to ride it to a "drum circle" gathering?
i love my expensive etmax that gives me that feeling your wheels dont
Too heavy to be a race wheel? Didn’t Zac Darnell just win TEF1 with this wheel
Alright! So it's definetely not! :D
lol bongo drum 🥁
Badum-tsss
Nosfet is a dead end... Failed in every way.. I originally thought it was going to be a better version of the lynx it turned out to be a complete pile of trash😂
can you explain?
It's failed the teeth broke they had to make a harnened version itl break again too much pressure possibly... One off pedals they'll fail... I like the front halos but I'm sure they're brittle and won't take impact. The fact there's no LEDs trolley handle or seat means it's unfinished... They may say it's not meant for that but then why not include anyway for convenience or at least give the option@@csai5763 lastly it's priced like it's something special... It's a kingsong s22 at best... Failed
why keeping on beating up leaperkim Adam you chose to be in bed with their competition and then you wonder why they ghost you.
can't have everything sometimes
every step a little little attack on veteran lynx :D typical left wing boy reaction when someone dont give him attention >.
That helmet offers like zero chin protection.
That's true. I'm aware of it :)