Thanks for the video! I am acctually getting ready to purchase a floor grinder for a big shop that needs a re-stored floor. Your video helped me understand what I need to do.
I agree about the music. This is probably the 4th or 5th video I have seen about DIY projects where the instructions are more important than the background music.
is there a way you can have written instruction for this. I have to polish my floor. and what confuses me the most is post prep for staining. I am located in toronto and i am not have luck finding someone to do this for me?
After the first polishing, what would you think of using a high end ceramic like Bona Floor Finish with Ceramic in it, that is gauranteed for millions of feet to walk over, and if it doesn't hold up, Bona will redo your floor for free?
Could I use the angle ginder method to clean up a small section of concrete floor(5 x 5 foot) in preparation for new vinyl flooring? It has a mixture of hard to remove adhesives. I think somebody even used tar on it.
May I have your email box or what'sapp ? We are a flooring machine manufacturer in china. Sunny Yang - Overseas department Shanghai Jiansong Industry & Trade Co.,LTD Skype: Tianfang30 What'sapp: +86 13052576105 Facebook: facebook.com/jsfloormachine
Here at Creations In Concrete in Houston we were using the Terrco 2000 and all of the reliable diamonds and we loved them check out some of our work at creationsinconcreteusa,com. That looks like a Puls Vac in the back ground as well.
May I have your email box or what'sapp ? We are a flooring machine manufacturer in china. Sunny Yang - Overseas department Shanghai Jiansong Industry & Trade Co.,LTD Skype: Tianfang30 What'sapp: +86 13052576105 Facebook: facebook.com/jsfloormachine
well looks good but which bond are you using for the floor, soft, medium or hard? next, if you get up to a 200grit resin you cant massage leftover scratches with a 50 grit resin, unless im mistaken and the film wasnt keeping up with wat you were saying, and i know you can save cost by shovling sluurry but com on!!! maurice simmons, jax fl, atrpco.com
This video may be useful if I could listen to it without the music. Couldn't listen to it for more than 1 minute without that annoying music getting to me
good job,but would like to know whether it can be used in high traffic areas.for example supermarket. How can i get in touch with your company since i have introduced some companies in our market but have given very poor results.please, contact me on my email. Thanks.
Yes, I am also interested in derrick94544 which is close to me, to pick up the challenge and show how he would do it. Since we are practiacly neahbors, give me the address of a job he has done and compare quality. It is always easy to put down others work when you have none of your own to show.
Thanks for the video! I am acctually getting ready to purchase a floor grinder for a big shop that needs a re-stored floor. Your video helped me understand what I need to do.
I agree about the music. This is probably the 4th or 5th video I have seen about DIY projects where the instructions are more important than the background music.
What are the terms of grinding and polishing cement fillings?
Do you have a version without the music in the background?
1st video that is complete and informative.
I like the idea of screening concrete with a rotary scrubber using 150 grit then picking up with wet vacuum! !
if not the Terrco 701 grinder/polisher, then what would you use and why?
is there a way you can have written instruction for this. I have to polish my floor. and what confuses me the most is post prep for staining. I am located in toronto and i am not have luck finding someone to do this for me?
i didnt mind the music, i liked it
What's the general cost to do something like this to a typical two-stall garage floor without an epoxy coating?
What is the general cost?
After the first polishing, what would you think of using a high end ceramic like Bona Floor Finish with Ceramic in it, that is gauranteed for millions of feet to walk over, and if it doesn't hold up, Bona will redo your floor for free?
What is the purpose of the densifyer?
Could I use the angle ginder method to clean up a small section of concrete floor(5 x 5 foot) in preparation for new vinyl flooring? It has a mixture of hard to remove adhesives. I think somebody even used tar on it.
Big like my friend
Great video, great narration. Thank you.
no sealer is used? just the lithium densifier?
Are you wetting the floor to minimize dust?
May I have your email box or what'sapp ? We are a flooring machine manufacturer in china.
Sunny Yang - Overseas department
Shanghai Jiansong Industry & Trade Co.,LTD
Skype: Tianfang30 What'sapp: +86 13052576105
Facebook: facebook.com/jsfloormachine
What do you charge?
Good video!
Excellent. Thanks!!!
Here at Creations In Concrete in Houston we were using the Terrco 2000 and all of the reliable diamonds and we loved them check out some of our work at creationsinconcreteusa,com. That looks like a Puls Vac in the back ground as well.
This is awesome
how much this machine
May I have your email box or what'sapp ? We are a flooring machine manufacturer in china.
Sunny Yang - Overseas department
Shanghai Jiansong Industry & Trade Co.,LTD
Skype: Tianfang30 What'sapp: +86 13052576105
Facebook: facebook.com/jsfloormachine
background music is louder than the voice.
Yes, you can.
well looks good but which bond are you using for the floor, soft, medium or hard?
next, if you get up to a 200grit resin you cant massage leftover scratches with a 50 grit resin, unless im mistaken and the film wasnt keeping up with wat you were saying, and i know you can save cost by shovling sluurry but com on!!!
maurice simmons, jax fl, atrpco.com
The music is way too loud... I can hardly understand your voice.
This video may be useful if I could listen to it without the music. Couldn't listen to it for more than 1 minute without that annoying music getting to me
Music makes this unwatchable.
ya, please cut the music!
wow!
and stop talking so fast lol, other than that , looks good!!
good job,but would like to know whether it can be used in high traffic areas.for example supermarket. How can i get in touch with your company since i have introduced some companies in our market but have given very poor results.please, contact me on my email. Thanks.
Hello anthony where are you located?
Yes, I am also interested in derrick94544 which is close to me, to pick up the challenge and show how he would do it. Since we are practiacly neahbors, give me the address of a job he has done and compare quality. It is always easy to put down others work when you have none of your own to show.
Kinda cocky, aren't you derrick94544? Why don't you post your own video and show everyone how it's done?
take out the stupid music, detracts from your video!
I like the idea of screening concrete with a rotary scrubber using 150 grit then picking up with wet vacuum! !