For those who want to bash you... to them I say "piss off!" Looks great and it does everything you want/need it to do. Awesome job! Love the interior lights and the fact that it comes with the little remote is wonderful! Enjoy and Thank you for sharing! ❤🙏❤
In the video I speak about possible upgrades in the future such as adding the extra battery and extra cooling fan. I completed that in 2019 but have yet to make a video of it. I will do it soon and link it in the description.
Just ordered a 406 Duo and was browsing all YT vids to learn it. Your's came up. As the Germans would remark, "Shyza!". Mispelled it for sure. Great work. Love the color LEDs too. Amazing is the engineering and thought that went into its creation. Bet that took a long while. It's even ready for when there is no power. Good seeing such great work including the one-man video production.
the power supply will actually run cooler the more amps you pull from it. pay attention to the fan in it sometime. when the charger is barely pulling amps from it the fan runs at full blast. that's because it's having to dump the extra power into a heat sink inside of it.
G'day Michael, Great DIY Setup, those I-Charger duo are beasts 💪🏻 I have the I-Charger 4010 Duo to charge/balance my 15S /10P Packs for my Enduro E-Bike Build, love it 👍🏼😊😎 It's Actually 2 seperate battery packs charging/balancing simultaneously, Pack 1 (8S/10P) & Pack 2 (7S/10P) handles it with no problems That's "150 x 18650 li-ion cells" happily charging away 👀👍🏼💪🏻😎
Dude, that’s awesome! And I’ll bet it was a lot cheaper then the store bought ones !! I have the 406 and was trying to figure out how to set it up. Bench mount or to go case, you really have me impressed with how easy it is to move around, I fly FPV quads so my packs are a lot smaller (4s 1300 mah) but I think this case is just right. Good on you for finding a better way instead of just buying the pelican case like everyone else. Thanks for the video man, many great ideas 💡, the only recommendations I have for ya is to consider adding a dual 1.0 a /2.0 a USB jack to charge phones, laptops , or I pad if that’s your cup of tea.
Thank you! Sorry for the late response. I never saw the notification for comments. Its still working well. I use it every other day. I did some more modifications to it which made it even cooler looking. I will make a follow up video one of these days.
really nice! gonna try to build a 50cal box with 18650 6s10p.. but my sweet 406duo won't fit.. so I will be using my pocket sized ISDT 6Q.. Will use ISDT small power supply.. this is going to be my travel charge station..
Looks awesome. The question I have about all of the cases is why when your using ac wall power are you converting to DC inverter when you can just plug ac into charger. It would make sense to me to only use 12dc power when charging on batt. Wouldn’t that reduce heat ?
Sorry, I never got notifications of all the comments and never really looked back at video. I will go through and try and come up with some info for everyone asking questions. A little late, sorry lol
Here is a link to the recent video showing the upgrades
th-cam.com/video/KrdRGdCmuKM/w-d-xo.html
For those who want to bash you... to them I say "piss off!" Looks great and it does everything you want/need it to do. Awesome job!
Love the interior lights and the fact that it comes with the little remote is wonderful! Enjoy and Thank you for sharing! ❤🙏❤
Thanks man, appreciate that!
In the video I speak about possible upgrades in the future such as adding the extra battery and extra cooling fan. I completed that in 2019 but have yet to make a video of it. I will do it soon and link it in the description.
You sound just like me. I loved building my box as much as flying
Just ordered a 406 Duo and was browsing all YT vids to learn it. Your's came up. As the Germans would remark, "Shyza!". Mispelled it for sure. Great work. Love the color LEDs too. Amazing is the engineering and thought that went into its creation. Bet that took a long while. It's even ready for when there is no power. Good seeing such great work including the one-man video production.
Thank you! Yes it took awhile. I did end up adding a second 6s 20 amp lipo on the other side. I will make another follow up video soon.
the power supply will actually run cooler the more amps you pull from it. pay attention to the fan in it sometime. when the charger is barely pulling amps from it the fan runs at full blast. that's because it's having to dump the extra power into a heat sink inside of it.
That’s awesome. Thank you. Great video
Thank you! Just uploaded part 2! Check it out!
amazing work! thinking of building mine during the winter
Rad, nice job
Thank! Check out the part 2 video if you haven't.
Well done! very nice
Thank you, check out the upgrade video!
amazing work bro
Thank you!
Awesome build. Very neat and clean.
Thank you!
inspiring, definitely next on my build list this fall.
Great layout 👍
Hardcore. Nice work, bro.
G'day Michael, Great DIY Setup, those I-Charger duo are beasts 💪🏻 I have the I-Charger 4010 Duo to charge/balance my 15S /10P Packs for my Enduro E-Bike Build, love it 👍🏼😊😎
It's Actually 2 seperate battery packs charging/balancing simultaneously, Pack 1 (8S/10P) & Pack 2 (7S/10P) handles it with no problems
That's "150 x 18650 li-ion cells" happily charging away 👀👍🏼💪🏻😎
Great work 👍...Nicely done
Dude, that’s awesome! And I’ll bet it was a lot cheaper then the store bought ones !! I have the 406 and was trying to figure out how to set it up. Bench mount or to go case, you really have me impressed with how easy it is to move around, I fly FPV quads so my packs are a lot smaller (4s 1300 mah) but I think this case is just right. Good on you for finding a better way instead of just buying the pelican case like everyone else. Thanks for the video man, many great ideas 💡, the only recommendations I have for ya is to consider adding a dual 1.0 a /2.0 a USB jack to charge phones, laptops , or I pad if that’s your cup of tea.
Thank you! Sorry for the late response. I never saw the notification for comments. Its still working well. I use it every other day. I did some more modifications to it which made it even cooler looking. I will make a follow up video one of these days.
Man, as a 4010 owner I felt your worry when switching + en - on the output.. PHEWWW. Great box man! And great charger!
don't worry, it has built in protection. and anti-sparking protection.
Great looking Box.Cheers.
Pretty sweet setup, but please use a lipo sack.
Really nice charging station.
Thank you!
BAD ASS BRO. 🤙🤙🤙🤙🤙🤙
Thank you! Check out the newer video with the upgrades!
Great job
Thank you!
Nice job bud!
really nice! gonna try to build a 50cal box with 18650 6s10p.. but my sweet 406duo won't fit.. so I will be using my pocket sized ISDT 6Q.. Will use ISDT small power supply.. this is going to be my travel charge station..
Awesome!
What size screws do I need to mount one of these chargers? M3? I cannot for the life of me figure that out!
It's mounted with 10lb velcro
What about safety?
Looks awesome. The question I have about all of the cases is why when your using ac wall power are you converting to DC inverter when you can just plug ac into charger. It would make sense to me to only use 12dc power when charging on batt. Wouldn’t that reduce heat ?
The charger only runs on DC. I am confused what you are asking?
@@mzgarage I guess I am asking why use a charger that is DC only when your going to convert to wall power anyway?
First 2:50 I'm like meh...
3:00 HOLY SHIT.
totally doing this..
Can i have a build list to make one please
There are so many parts to this, it would be hard to make a parts list. Is there anything specific you were wondering about?
This is really well done. Do you have dimensions for your plates and support brackets ? I am looking to build one of these for my charger.
Sorry, I never got notifications of all the comments and never really looked back at video. I will go through and try and come up with some info for everyone asking questions. A little late, sorry lol
Hello
How did you fix the charger on the plate?
The Velcro stuff that clicks together
how did you make the panels so that they clip in ?
I used Velcro, but the stronger plastic stuff.
how your iCharger doing, mine has been burned after month of working, very unreliable
Still working great
what case is that
www.homedepot.com/p/RIDGID-22-in-Pro-Organizer-Black-221735/205440492
Can you post a how to video! thanks
That would be very difficult to do. I went at it piece by piece.
Lol
It's plastic........
?
@@mzgarage If your batteries catch fire, that will also catch fire. Not to bash the setup I like it a lot. Nevertheless not completely safe.