Tech Acad my saviourrrrrrr, my online class prof is not even teaching how to do activities they just handed as the cisco course and made us figure it out by ourselves lol good thing I found you! thank you so much!
Honestly sometimes Packet Tracer pings wont work even if you do them correctly. I'm glad there are resources online to guide you through these. It can get confusing and its easy to become frustrated.
Sir, You're an awesome tutor ! Since day 1 I've been watching your every cisco configurations video you've posted and I'm getting very interested to learn more about cisco switching and routing concepts. You're my real professor... Thank you so much for making this cisco learning very interesting .
I though you had to create your own subnet table for the ipv6 addresses and I was so confused. I skipped to the part 2 and luckily with your explanation I realized that it's just assigning the ipv6 the same way you'd do with ipv4.
Your video is very helpful. Thank you for that and at the same time would include from the beginning( i.e mean when you set up your packet racer it doesn't give full image because you started from the middle which is preconfigured.) In order to have full understanding, can you please, something from the initial to give or to have where you started?
Subnet Mask will be given in the activity. Otherwise Network Engineer will decide Network and Mask as per the requirements in real time. Thank you so much for your great support and sharing our channel with your friends...!!!
Love your content, is there any way you could do 12.5.13 Packet Tracer - Troubleshoot Enterprise Networks? It's a really long and complicated PT and I was hoping you could help us out by completing it. Thank you!
I wish you would click CHECK RESULTS to verify that everything works. I always do this and it says that I have a mistake but I don't think I do and it would be helpful if you covered this issue or showed that I had make a mistake.
Hello Tech Acad, always watching to you tutorials. I would like to ask if how you make the internet routers? How you merge two routers inside the cloud logo? Thanks and more powers
Hi make sure that given the correct command, in the correct interface mode Ex: R(config)#interface g0/0 R(config-if)#ipv6 FE80::2 link-local And thanks for your great support and sharing my dear friend....!!!!
when i configure the Gigabyte 0/1 for R2 using ipv6, i keep getting: Error: 2001:DB8:C0DE:13::/64 is overlapping with 2001:DB8:C0DE:13::/64 on GigabitEthernet0/0 , please help!!!
You configured the same IPv6 Network address with another interface on the same router! Make sure that you give unique IPv6 Network address in the same router!
Glad it helped And thank you so much for your great support and sharing my dear friend...!!! If you wish to get any support, you can contact our team using our website.
again and again - Tech Acad comes through --- best tutor ever
Glad I could help!
Tech Acad my saviourrrrrrr, my online class prof is not even teaching how to do activities they just handed as the cisco course and made us figure it out by ourselves lol good thing I found you! thank you so much!
That is awesome!
Honestly sometimes Packet Tracer pings wont work even if you do them correctly. I'm glad there are resources online to guide you through these. It can get confusing and its easy to become frustrated.
Yes, it happens. Just save and restart the packet tracer, it will work!
Thanks for helping a slow learner student. It's hard to keep up with fast paced classes.
Happy to help!
Sir, You're an awesome tutor ! Since day 1 I've been watching your every cisco configurations video you've posted and I'm getting very interested to learn more about cisco switching and routing concepts. You're my real professor... Thank you so much for making this cisco learning very interesting .
Great to hear!
I though you had to create your own subnet table for the ipv6 addresses and I was so confused. I skipped to the part 2 and luckily with your explanation I realized that it's just assigning the ipv6 the same way you'd do with ipv4.
thank you so much! I have a question how do you determine that 255.255.255.128 is the subnet mask?
Once you learn Subnetting, you will learn all these details.
Thanks for your great support and sharing our channel with your friends...!
@@TechAcad thank you for the reply!
Your video is very helpful. Thank you for that and at the same time would include from the beginning( i.e mean when you set up your packet racer it doesn't give full image because you started from the middle which is preconfigured.) In order to have full understanding, can you please, something from the initial to give or to have where you started?
Thanks for the tip!
why we wrote subnet mask as 128 at the end , where that 128 came from?
Once we do the subnetting, the Subnet Mask also changes!
@@TechAcad then how do we get to know its 128 in the end
@@chetankaushal9981 Did you ever figure out where the "128" came from? i don't see it anywhere in the instructions lol
Sir which router you have used in the practical sir?
Thank you, Tech Acad!
Welcome!
do you have a step by step ? on what are the icons that you used ?
Thank you. Always so clear and helpful
Glad it was helpful!
how and where do you find the subnet mask?
Subnet Mask will be given in the activity. Otherwise Network Engineer will decide Network and Mask as per the requirements in real time.
Thank you so much for your great support and sharing our channel with your friends...!!!
Thank you, youre the best, keep making these please!!!
Thanks, will do!
Thank you so much for your videos!!!
Glad you like them!
could you please arrange the playlist and make the videos in order 1.1.1, 1.1.2, 1.2, ....
Hi
All these are already in the playlists!
Thanks for the great support!
@@TechAcad yes but the order is mixed and beginners dont know which video comes first, second …
how downloads this Lab and when I click on it than it should go to directly to the Paket Tracer
bro i love you , love from MEXICO
Hi
Thanks for your great support and sharing my dear friend...!!!
Love your content, is there any way you could do 12.5.13 Packet Tracer - Troubleshoot Enterprise Networks? It's a really long and complicated PT and I was hoping you could help us out by completing it. Thank you!
I'll check it out
I wish you would click CHECK RESULTS to verify that everything works. I always do this and it says that I have a mistake but I don't think I do and it would be helpful if you covered this issue or showed that I had make a mistake.
This really fucking helps! Thank you a lot for sharing your knowledge!
Hello Tech Acad, always watching to you tutorials. I would like to ask if how you make the internet routers? How you merge two routers inside the cloud logo?
Thanks and more powers
There is an option called cluster in packet tracer! If you wish to get more details, you can contact us!
Nice one Thank u so much my brother!
You're most welcome
really good merwyn did not send me this
Glad it helped!
when I put fe:80::2 link-local in gigabit under R2, packet tracer tells me it's incorrect. I went from 92% done to 60% just making those changes.
Hi
make sure that given the correct command, in the correct interface mode
Ex:
R(config)#interface g0/0
R(config-if)#ipv6 FE80::2 link-local
And thanks for your great support and sharing my dear friend....!!!!
Thanks for helping me out but i can't ping ipv4 address of pc1 and pc2 but i can ping ipv6 address of R2 , what could be the problem with router 1
Geez thank you ❤️❤️❤️❤️
Thank you so much my dear Friend for your great support...
wow this helped me a lot
when i configure the Gigabyte 0/1 for R2 using ipv6, i keep getting: Error: 2001:DB8:C0DE:13::/64 is overlapping with 2001:DB8:C0DE:13::/64 on GigabitEthernet0/0 , please help!!!
You configured the same IPv6 Network address with another interface on the same router! Make sure that you give unique IPv6 Network address in the same router!
Thx from Russian stuent :D
Our pleasure!
And thank you so much for your great support and sharing my dear friend...!!!
Thanks again friend.
Thanks again!
At 3:16 i am not getting code
Thank you tech.
You're welcome!
And thanks for your great support and sharing!
Thankyou so much!
Glad it helped!
Did anyone else's say destination host unreachable?
THX Buddy!!!
Thankyou alot.
Glad it helped
And thank you so much for your great support and sharing my dear friend...!!!
If you wish to get any support, you can contact our team using our website.
❤
👨💻😷✌🏽
Thanks
si frajer