Why do you have so few subscribers and comments? You are fun to watch, clearly VERY into beer, and have wonderful info. Clearly an untapped resource on TH-cam. One day everyone will catch on.
Im not sure! I would think you could, but I would double check the impact alcohol may have against the components that it would be in contact with.
ปีที่แล้ว +1
Nice stuff, this would satisfy the temperature control void that was left after my fermentation fridge died. Sadly window units don't exist around here. And portable AC is not ideal for this. That is why I was thinking of getting a spare Compressor Condenser for the Car refrigeratorunits and just doing everything from scratch.
Worst case you could just make ice, fill up some 2 liters of water and throw a bunch in the freezer (if you have the space) and just cycle them. Same idea, just more steps.
Thanks for checking out the video! So in my case I built it for under 50 but if you source a cheep used/free ac on facebook marketplace you can prob build around that $100 price tag.
2 Questions...if you have multiple fermenters, you would just have multiple pumps in the ice chest correct? Also, are you going to make any more videos? Enjoy them very much.
Correct! One for each fermenter. Also I’m working on an update video for one of my older videos right now. Life kinda got busy with the kids so that’s why I’m not uploading on a schedule anymore. I may upload more in the future though. Happy you enjoy the videos!
I love the ingenuity of this project and a great way to repurpose an old AC and cooler. A couple of questions. Are you using a single Inkbird for the AC and the pump or two different Inkbirds? Two separate is the only way I can imagine. I expect you would want the cold water bath to have a set temperature that is many degrees below the set temperature for your beer. You would need two temperature controllers for that if I understand correctly. Also, any recommendation on a submersible pump?
Hey sorry it took some time to get back to you on this question. Your right, 2 ink birds for this setup. For the pump I dont have a recommendation since im just using the pump that came with my fermenter. But any submersible pump would do, it can be very under powered since its just moving water up a few feet.
Nice project for cheap! but your inkbird temp probe in the cooler is going to fail because it is not water tight and not meant to be put directly in liquid. Put a plastic bag or something like that around the end to prolong the life of the inkbird.
I wish I had more room in my apartment lol not sure where I would put this other than on top of my keezer which will make it hard to get in/out of. Guess I will keep this in mind for when I have more room for brewing!
@@TroubleBrewing Perhaps you can focus on clarifying your beers my friend, because an old AC that is mutilated to partially fit in a cheap cooler is not going to save you my friend. No wonder you have trouble brewing. I will subscribe to your channel for 5 years, 7 years max to see if it improves a little.
![Glycol Chiller DIY Build [ UPDATED ]](http://i.ytimg.com/vi/p2M7ffvdM2U/mqdefault.jpg)
![Glycol Chiller DIY Build [ UPDATED ]](/img/tr.png)
![How to Build a DIY Glycol Chiller [ Control Fermentation Temperatures ]](http://i.ytimg.com/vi/OkaR9bQPs9A/mqdefault.jpg)
![[Live] ศึกมหึมันส์มวยไทยสังเวียนเดือด เวทีมวยชั่วคราวสวนสยาม | จันทร์ 30 กันยายน 2567](http://i.ytimg.com/vi/pM1k6f7JXUc/mqdefault.jpg)
Why do you have so few subscribers and comments? You are fun to watch, clearly VERY into beer, and have wonderful info. Clearly an untapped resource on TH-cam. One day everyone will catch on.
Ha thanks! Its quite the grind, hard to build up an audience. But I just enjoy trying to help people in the hobby.
How much watts of do you think this cooler cool? Lets day a PC drawing around 800 watts from the wall.
Wow awesome build! love the way you DIY some of these more expensive brewing tools
If we need cooler temperature, do you think we can use alcohol instead of glycol ?
Im not sure! I would think you could, but I would double check the impact alcohol may have against the components that it would be in contact with.
Nice stuff, this would satisfy the temperature control void that was left after my fermentation fridge died. Sadly window units don't exist around here. And portable AC is not ideal for this. That is why I was thinking of getting a spare Compressor Condenser for the Car refrigeratorunits and just doing everything from scratch.
Worst case you could just make ice, fill up some 2 liters of water and throw a bunch in the freezer (if you have the space) and just cycle them. Same idea, just more steps.
This one can work to chill from the boil to the fermenter?
Hey, yea you could hook this up to a chiller for the cold side , not sure when recirculating if the ac can keep up but you would have to test that.
That'll be a good one! Looking forward to seeing the video. Cheers!
Good job Matt.
Welp, you meant "under $100 as long as you already have all you need" right? 😅
Regardless, nice video!
Thanks for checking out the video! So in my case I built it for under 50 but if you source a cheep used/free ac on facebook marketplace you can prob build around that $100 price tag.
2 Questions...if you have multiple fermenters, you would just have multiple pumps in the ice chest correct? Also, are you going to make any more videos? Enjoy them very much.
Correct! One for each fermenter. Also I’m working on an update video for one of my older videos right now. Life kinda got busy with the kids so that’s why I’m not uploading on a schedule anymore. I may upload more in the future though. Happy you enjoy the videos!
@@TroubleBrewing I get it...I have 6 kids...same wife....beer leads to kids...kids lead to beer..repeat.
I love the ingenuity of this project and a great way to repurpose an old AC and cooler. A couple of questions. Are you using a single Inkbird for the AC and the pump or two different Inkbirds? Two separate is the only way I can imagine. I expect you would want the cold water bath to have a set temperature that is many degrees below the set temperature for your beer. You would need two temperature controllers for that if I understand correctly. Also, any recommendation on a submersible pump?
Hey sorry it took some time to get back to you on this question. Your right, 2 ink birds for this setup. For the pump I dont have a recommendation since im just using the pump that came with my fermenter. But any submersible pump would do, it can be very under powered since its just moving water up a few feet.
Nice project for cheap! but your inkbird temp probe in the cooler is going to fail because it is not water tight and not meant to be put directly in liquid. Put a plastic bag or something like that around the end to prolong the life of the inkbird.
Good tip will do, I thought those were waterproof.
Good work. May have to build this.
How did you get the circ pump stay attached to the bottom of the cooler?
My pump just sits at the bottom. The weight of the pump just drags it down. Does your pump float?
Will be watching on my work computer..
living on the edge.
killer video braj!
Dude this is awesome!!
Thanks! Was a fun project, enjoy these DIY videos.
I wish I had more room in my apartment lol not sure where I would put this other than on top of my keezer which will make it hard to get in/out of. Guess I will keep this in mind for when I have more room for brewing!
You can build these smaller if you can get your hands on a newer smaller AC.
I dont like the way this build is heading.
You really should apologise
lol your going to have to clarify on this one.
@@TroubleBrewing Perhaps you can focus on clarifying your beers my friend, because an old AC that is mutilated to partially fit in a cheap cooler is not going to save you my friend.
No wonder you have trouble brewing.
I will subscribe to your channel for 5 years, 7 years max to see if it improves a little.