hmm, i am always scared to remove it too high so i just do it enough to near "too low". And i think its much better than risking looking like an egg head for the rest of the year.
My husband had his done believe we met. His was too high. We’ve spent 8 months growing it back out, now I’m going to do it correctly. His hair is “thinning” and I watched your video about thin vs thinning undercut. He’s just got his heart set on that undercut, even with his SUPER cowlick bald spot in back. We are going to try. Thank you for all the helpful hints.
Getting your undercut cut too high is honestly probably the worst thing that can be done to your hair. Unfortunately it has happened to me multiple times but I finally started going to a real barber rather than Great Clips, Sports Clips, Supercuts, etc. and have been getting pretty good haircuts now that can give me a proper undercut. Getting it cut too low has happened to me before as well but its an easy fix.
Mine started too high or eventually gets too high from accidentally shaving it too high week after week of maintaining the shaved part. Many times I’ve just waited about a month of growth than just shave a new lower portion where I want it at and let the fuzzy mid hair grow over time and just wear a beanie or hat daily till it’s long enough . I have shaved my head to just start over but I’d rather keep my hair and do it this way . Eventually it’s long enough to go get the hairstylist to cut the top and the part I grew back blends in perfectly . Preserving the long top is more important to me cuz that takes way longer to reach the back then the sides will take to get some length. Try it it’s not bad, top hair covers it up most of the time too.
Is there anything we can do in the mean time when letting “too high” grow in. Like how long does it half to be? My son’s is too high, especially in the back.
I had the too-high undercut happen to me at one point in 2020 - at a salon even. Maybe not quite as bad as the one in the video here, but it was annoying waiting for the hair to grow back and even it back out again.
I do my own Mohawk and I had the same trouble, but trying to get the sides even was what I messed up and ended up with a very thin Mohawk,vi have very thin hair as well, but I did it correctly this time , it's a little uneven, but if I try to fix it, I'll end up with a very thin hawk again, I mean no one will really be able to tell it's like a very minor difference... I made it a bit thicker so I could put my dread extensions in, but I never knew where to put the line, this was very helpful . I have always ended up going to the wrong place to get my haircuts and they never looked good to me, that's when I started doing my own Mohawk about 12 years ago. I don't trust anyone with my hair anymore. But do you have any tips on how to make the sides completely even?
Thanks for this video, I just got my hair cut like the green mannequin you have and my corner lines were all messed up. Just got them fixed and used this video to show my Mom how to do it. Finally I I've accomplished a hair goal I've been wanting :)
My hair has a high natural part. From the sides past the corner, up to the just before mohawk territory be in "very high undercut" territory my hair grows out normally, but for just a sliver on both sides around the peak it grows forward, then is grows up. I did the high undercut, and it looked good. I tried adjusting it a bit and mess it all up, but I think you can go pretty high on the right head.
Actually, you showed that "too low" looks much better than "too high". The rest can even depend on the head shape and hair type - in my case thin blonde hair and a bit rounder head, so that the extra millimeters do better to achieve the look that other people get with having the undercut put a bit higher. - So from my POV, start low and when the hair strands get thicker, beding outwards, then you still have the option to cut away a few millimeters to style them easier.
Tony Kroos and CR ejemplos claros yo tengo ese problema no quiero llevar el pelo repeinado y pegarme una hora moldeando y subirme el fade no es nada nuevo pero ya no tengo 20 años como para ir demasiado agresivo
I remember once I had to go get a haircut from a different barber who wasn’t my regular. He cut one side too high and the other too low. Only reason I didn’t go to my regular was because she was booked up. Needless to say, after I left at first barbershop, I went to my regular one and showed her what happened. She playfully laughed and told me “that’s what you get for going with somebody else.“ In the end, there wasn’t much I could do with the hair so I had to cut it all off and rock dad caps for a good three months.
Yes, my first undercut was done way too high although I specifically warned that I wasn't going for that look. Looked like a mohawk. I was so disappointed I didn't cut my hair for two years after that In hindsight I should have known when the barber told me he didn't know what an undercut was. Obviously I changed salon
Rule of thumb: if your barber doesn't understand what you mean, avoid getting that haircut or avoid that barber. I once interrupted a barber halfway through a session because from the get-go, she had no clue what I was talking about lol
thanks!. My first undercut was too low but now it goes with my natural widow peak so it kind of rides a very thin line. it is a little extreme, but I don't slick it I let it flop to the side usually.
out of the both of these, I would rather a barber fuck me up and give me an undercut too low than too high. Having it too high looks way worse imho. Also, I think some people can rock a low undercut well. Kurt Cobain in 1992 and Gerard Way in the early 2010's, and it worked well for them!
I appreciate these insights, I'm getting my haircut tomorrow and I'm actually looking to get it cut around my temples so it has that sharp edge pointing kind of outwards, and so according to this video it may seem low but I have somewhat long hair at this point (7-8 Inches) so I believe I'll be able to tie my hair into a bun/ponytail or use product like pomade to slick it back.
I had my hair up n tied back while trimming the back n sides with zero guard cuz that’s how I like it . I knicked the one side n didn’t think nothing of it . When I took my hair tie out . Nothing but loose hairs . Why can’t I figure out where they came from . Do I have to cut it ? Will it grow ? I Deff lost some volume and thickness . Ffs. Nothing noticeable but I can Deff feel it
I haven't gone too high, but I've done too low. My issue is how to do the back by myself. I'm a beginner with cutting hair, so I have a lot to learn and this has been helpful for choosing a line.
I haven't finished the video yet. But when I had my undercut... The person who did it, did a good job on the top cut. But he took it WAY to far back on the back of my head. It's was terrible.
So before covid happened i had done a Mohawk at home and it turned out amazing. I learned i can pull it off with my head shape. Over time i switched to a military cut where i shaved the sides and back off, as it grew out i turned it into a tapered fringe which looked even better and i figured out what hair cuts looked good on me. The first time i did my mohawk it was too low because i was afraid of going too high. I never tried riskier hair styles. But eventually after practice and i got the shapes down and figured out where my hair line looked best. I figured it i screwed it up i could just buzzcut my head 🤷 itll grow back. I havent been to a barder since. Been cutting my hair for 7 years using a trifold mirror and I've had many compliments on it asking where i got it 😂.
Sometimes when I don't want to fade my hair and switch things up I do a classic undercut with the exception that I don't slick it back but do more of a side part. I use the correct parting as I use my natural part when shaving the hair off but I always think that it looks too rounded and that my natural part is high up. Any ideas what I could do without having to fade?
I'm ok at cutting my own hair, Dave's me money 😂 my first undercut last night, and wish I saw this first. Doesn't look too bad, but I cut way high, just like the dummy 😅 Anyway to maybe blend the length better, or to late? I might opt for Viking style braid tho. or maybe to late
I have had a under cut for a while instill like longer hair trying to figure out how to grow into a more normal long style I been told have to buzz it start over really don't want to do that any advice I'll take.
I've been doing my own undercut for a year now am getting better but the top hairs take soo long to grow to sit the right length at the back reckon I've got another year to go
since you're good at it, maybe you can help me out with a question: How do you cut the line when a cowlick is in the way? Tried cutting an undercut and the line went uneven after I reached the cowlick, had to go bald in the end.
I went to a chinese hair salon for my first side cut, and they did end up doing it too low. I did not consider when going there that in fact, chinese men LIKE their sidecut low, so the hair can flow down lol The next day i went to another one and they fixed it
It's better to have the under cut professionally. from that point you can trim the undercut yourself when it gets long. top your hair just leave it alone. Grow it out etc. I saved a lot of money doing that for 2 years until got tired of the long hair and the undercut.
mhhh that is the best way to do it. Always having trouble with my cowlick so I will let a hairdresser deal with that. After that is done, I can just buzz the sideson my own.
Hey there. I paid a barber over $100 Australian $$ for an undercut and I have a side part. Like my profile pic here on youtube. Is that a decent price to pay?
Comb your hair over to the opposite side and then just go straight up with the clippers, it will keep you from going too low or too high. Just straight up, no flick or anything. At least that has been my experience.
great video! I've been thinking a long time about how high the undercut should be and came to the exact same conclusion as you - perfectly aligned to the hair line 👍Also, IMHO, it also has the most aesthetic look 😊
I gave this a like just because u sacrificed a mannequin head just or this video 😂 But in all honesty I have been struggling to give my husband a good undercut and I'm thinking now I've been going too low. Thanks so much for the tips.
same here, did this mistake, tried to fix it and after 20 mins without improvement I was like "fuck it" and shaved my head. Medium long hair to bald within a few minutes.
@@seantran5011 true, most likely it will take about 2 months to reach a short length so it won't take too long and will be back in no time. Even though it was not planned and an accident, it does not look that bad. I kind of like the new style, maybe I'll keep it for a while...
7:28 Typical "undercut" 1 guard all the way up would completely butcher my hair. One barber even "lined me up" took me a good year to get my length back
I think I'll be getting an undercut P.S:my hair is really grown out bit its not medium length,is it bc my hair is too thick or too flat? BTW it's straight and curly Thanks,Stephen ✌
There's absolutely no difference between the low left and low right versions. Hair on top "wants to drop" equally. So that part of the video is kind of worthless. The idea of wanting to avoid an undercut that is too high.... duh. Blindingly obvious.
hmm, i am always scared to remove it too high so i just do it enough to near "too low". And i think its much better than risking looking like an egg head for the rest of the year.
😂
I already have a big ass head, im really trying to full throttle here
i was shouting,crying when he started cutting high. my soul left me.
My husband had his done believe we met. His was too high. We’ve spent 8 months growing it back out, now I’m going to do it correctly. His hair is “thinning” and I watched your video about thin vs thinning undercut. He’s just got his heart set on that undercut, even with his SUPER cowlick bald spot in back. We are going to try. Thank you for all the helpful hints.
Getting your undercut cut too high is honestly probably the worst thing that can be done to your hair. Unfortunately it has happened to me multiple times but I finally started going to a real barber rather than Great Clips, Sports Clips, Supercuts, etc. and have been getting pretty good haircuts now that can give me a proper undercut. Getting it cut too low has happened to me before as well but its an easy fix.
What's the name of the barber you go to now?
I go to Great Clips and look like an egg head 😂😂😂😂
Mine started too high or eventually gets too high from accidentally shaving it too high week after week of maintaining the shaved part. Many times I’ve just waited about a month of growth than just shave a new lower portion where I want it at and let the fuzzy mid hair grow over time and just wear a beanie or hat daily till it’s long enough . I have shaved my head to just start over but I’d rather keep my hair and do it this way . Eventually it’s long enough to go get the hairstylist to cut the top and the part I grew back blends in perfectly . Preserving the long top is more important to me cuz that takes way longer to reach the back then the sides will take to get some length. Try it it’s not bad, top hair covers it up most of the time too.
You made that “too low”look good. Final form was nice too.
Is there anything we can do in the mean time when letting “too high” grow in. Like how long does it half to be? My son’s is too high, especially in the back.
I had the too-high undercut happen to me at one point in 2020 - at a salon even. Maybe not quite as bad as the one in the video here, but it was annoying waiting for the hair to grow back and even it back out again.
I do my own Mohawk and I had the same trouble, but trying to get the sides even was what I messed up and ended up with a very thin Mohawk,vi have very thin hair as well, but I did it correctly this time , it's a little uneven, but if I try to fix it, I'll end up with a very thin hawk again, I mean no one will really be able to tell it's like a very minor difference... I made it a bit thicker so I could put my dread extensions in, but I never knew where to put the line, this was very helpful . I have always ended up going to the wrong place to get my haircuts and they never looked good to me, that's when I started doing my own Mohawk about 12 years ago. I don't trust anyone with my hair anymore. But do you have any tips on how to make the sides completely even?
The amount for barbers who just don't understand this is incredible.
I wish there was a way to show this to a barber without them getting offended.
Say "I'm terrible at explaining what I want with words, could I show you a video so we know where it's going to get parted?"
I found a barber got it right the first time. Went back a second time and he went and he his own thing and messed up half my head. Never again.
@LatentOwl3042 imagine making a trained barber watch this 7 minute video. I bet 90% of them would be pissed off and tune it out
I was literally practicing the speech in my head while watching this 😂
Thanks for this video, I just got my hair cut like the green mannequin you have and my corner lines were all messed up. Just got them fixed and used this video to show my Mom how to do it. Finally I I've accomplished a hair goal I've been wanting :)
My hair has a high natural part. From the sides past the corner, up to the just before mohawk territory be in "very high undercut" territory my hair grows out normally, but for just a sliver on both sides around the peak it grows forward, then is grows up. I did the high undercut, and it looked good. I tried adjusting it a bit and mess it all up, but I think you can go pretty high on the right head.
Actually, you showed that "too low" looks much better than "too high". The rest can even depend on the head shape and hair type - in my case thin blonde hair and a bit rounder head, so that the extra millimeters do better to achieve the look that other people get with having the undercut put a bit higher.
- So from my POV, start low and when the hair strands get thicker, beding outwards, then you still have the option to cut away a few millimeters to style them easier.
*When the mannequin has a better haircut than you even though it's supposed to be botched*
That mannequin built different fam all of us egg heads aren't lol 😂
Tony Kroos and CR ejemplos claros yo tengo ese problema no quiero llevar el pelo repeinado y pegarme una hora moldeando y subirme el fade no es nada nuevo pero ya no tengo 20 años como para ir demasiado agresivo
I remember once I had to go get a haircut from a different barber who wasn’t my regular. He cut one side too high and the other too low. Only reason I didn’t go to my regular was because she was booked up. Needless to say, after I left at first barbershop, I went to my regular one and showed her what happened. She playfully laughed and told me “that’s what you get for going with somebody else.“ In the end, there wasn’t much I could do with the hair so I had to cut it all off and rock dad caps for a good three months.
Dang 😢
Yes, my first undercut was done way too high although I specifically warned that I wasn't going for that look. Looked like a mohawk. I was so disappointed I didn't cut my hair for two years after that
In hindsight I should have known when the barber told me he didn't know what an undercut was. Obviously I changed salon
Rule of thumb: if your barber doesn't understand what you mean, avoid getting that haircut or avoid that barber. I once interrupted a barber halfway through a session because from the get-go, she had no clue what I was talking about lol
thanks!. My first undercut was too low but now it goes with my natural widow peak so it kind of rides a very thin line. it is a little extreme, but I don't slick it I let it flop to the side usually.
out of the both of these, I would rather a barber fuck me up and give me an undercut too low than too high. Having it too high looks way worse imho.
Also, I think some people can rock a low undercut well.
Kurt Cobain in 1992 and Gerard Way in the early 2010's, and it worked well for them!
I appreciate these insights, I'm getting my haircut tomorrow and I'm actually looking to get it cut around my temples so it has that sharp edge pointing kind of outwards, and so according to this video it may seem low but I have somewhat long hair at this point (7-8 Inches) so I believe I'll be able to tie my hair into a bun/ponytail or use product like pomade to slick it back.
I'm still figuring out how to adjust my undercut
And this is a very helpful guideline
Thank you!
I had this happen to me in November, I cut the sides far too high with a number 1. My hair is only just growing back now, hoping to get it cut soon
I had my hair up n tied back while trimming the back n sides with zero guard cuz that’s how I like it . I knicked the one side n didn’t think nothing of it . When I took my hair tie out . Nothing but loose hairs . Why can’t I figure out where they came from . Do I have to cut it ? Will it grow ? I Deff lost some volume and thickness . Ffs. Nothing noticeable but I can Deff feel it
I haven't gone too high, but I've done too low. My issue is how to do the back by myself. I'm a beginner with cutting hair, so I have a lot to learn and this has been helpful for choosing a line.
“This mannequin has an extremely high forehead.”
Me: *chuckles* I’m in danger…
can you bring frank back? i want more haircut tutorials from frank!
Frank was and still is great
Can anybody give me an advice? I have an undercut but my hair is wavy and always swells up as soon as I untie it. Would a mohawk undercut solve this?
Really helpful video, thank you !!
I haven't finished the video yet. But when I had my undercut... The person who did it, did a good job on the top cut. But he took it WAY to far back on the back of my head. It's was terrible.
So before covid happened i had done a Mohawk at home and it turned out amazing. I learned i can pull it off with my head shape. Over time i switched to a military cut where i shaved the sides and back off, as it grew out i turned it into a tapered fringe which looked even better and i figured out what hair cuts looked good on me. The first time i did my mohawk it was too low because i was afraid of going too high. I never tried riskier hair styles. But eventually after practice and i got the shapes down and figured out where my hair line looked best. I figured it i screwed it up i could just buzzcut my head 🤷 itll grow back. I havent been to a barder since. Been cutting my hair for 7 years using a trifold mirror and I've had many compliments on it asking where i got it 😂.
Awesome to hear.
Thank u so much I'm just learning how to do a uncut for a slight modified fauxhawk
Sometimes when I don't want to fade my hair and switch things up I do a classic undercut with the exception that I don't slick it back but do more of a side part. I use the correct parting as I use my natural part when shaving the hair off but I always think that it looks too rounded and that my natural part is high up. Any ideas what I could do without having to fade?
You should have continued on to do the hard part: the back!
I liked it low also but too high is a Mohawk. That’s all. Hahah thank you for the video!
That too low cut looked awesome! Lol
This was my mistake 3 years ago. Growing my hair the correct way now
Should I still ask for a part at that same place if I’m trying to get a 2 block for pin straight hair?
Thanks for the video, hope your fingers are better now ☺
I'm ok at cutting my own hair, Dave's me money 😂 my first undercut last night, and wish I saw this first.
Doesn't look too bad, but I cut way high, just like the dummy 😅
Anyway to maybe blend the length better, or to late?
I might opt for Viking style braid tho.
or maybe to late
My sides are basically skin fade, but i have a long top, to even everything out should i shave my entire head again?
I have had a under cut for a while instill like longer hair trying to figure out how to grow into a more normal long style I been told have to buzz it start over really don't want to do that any advice I'll take.
hi i would like to ask why was my hair curly as a kid but now it is straight as a teen
Hair patterns change every 7 years. This can affect color, shape, texture, the way it lays, everything.
Yea but if you dont want your hair back all the time its not an issue. I think it comes down to personal preference this isnt universal for everyone
It was helpful thanks
Glad it helped
I’ve found that it’s looks great with a taper especially for dark hair
I went too high years ago with my sidecut, years later its still sorta there cos i cant grow it out nicely.
WHAT A LEGEND!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
my problem with getting undercuts is every time i get it cut they go higher and higher, till its a mohawk. so im starting to start the line lower.
why does my hair not flow down fully when i undercut as there is a gap
I've been doing my own undercut for a year now am getting better but the top hairs take soo long to grow to sit the right length at the back reckon I've got another year to go
since you're good at it, maybe you can help me out with a question: How do you cut the line when a cowlick is in the way? Tried cutting an undercut and the line went uneven after I reached the cowlick, had to go bald in the end.
I rock the viking undercut baby lets go!🤙🔥🍻
I remember got undercut to high and eventually i force my self to bald. I really dot get it why they mostly take so high hairline of undercut
I asked for a mid skin fade gave me the mid skin fade but one side IS AN UNDERCUT, still growing it now, anyone can help me?
Let me show u a video of my hair what can i do plz help me
omg, tysm, it's actually was rlly helpful for me and my bro
I went to a chinese hair salon for my first side cut, and they did end up doing it too low. I did not consider when going there that in fact, chinese men LIKE their sidecut low, so the hair can flow down lol
The next day i went to another one and they fixed it
this one is totaly different than the line in your UNDRCUT step by step...so what line is it?
It's better to have the under cut professionally. from that point you can trim the undercut yourself when it gets long. top your hair just leave it alone. Grow it out etc. I saved a lot of money doing that for 2 years until got tired of the long hair and the undercut.
mhhh that is the best way to do it. Always having trouble with my cowlick so I will let a hairdresser deal with that. After that is done, I can just buzz the sideson my own.
I went a bit too high lol
Hey there. I paid a barber over $100 Australian $$ for an undercut and I have a side part. Like my profile pic here on youtube.
Is that a decent price to pay?
What’s the name of the cut everyone had in the 30s!? Everyone on Boardwalk Empire has a taper but long on top that’s what I want
Comb your hair over to the opposite side and then just go straight up with the clippers, it will keep you from going too low or too high. Just straight up, no flick or anything. At least that has been my experience.
That is no classic undercut. You will have to use clipper/scissor over comb to take out the hard line.
Thanks ma man
great video! I've been thinking a long time about how high the undercut should be and came to the exact same conclusion as you - perfectly aligned to the hair line 👍Also, IMHO, it also has the most aesthetic look 😊
Can you plz do a Alex Eubank hair tutorial
Helpful thanks
Hey i really need help for my hair
I think I've had mine too high but I don't wanna go through the process of regrowing it 😂
É muito melhor fazer o sidcut baixo, muito alto pode ficar estranho.
Lol I accidentally cut mine too short once
Undercut have very much diffrent version....but in this high line is not for all tips hair...
getting my first undercut NEW FEAR UNLOCKED HAHAHAHA, i hope my stylist does well
Thank you for your sacrifice, Mr Mannequin. 😔😔
Never trust a bald guy with your hair, this is just how he gets you to shave your head. 😂
I gave this a like just because u sacrificed a mannequin head just or this video 😂 But in all honesty I have been struggling to give my husband a good undercut and I'm thinking now I've been going too low. Thanks so much for the tips.
My girlfriend is watching this video before giving me a haircut in a few minutes. Wish me luck ;D
Thank you for this sir !!
Very helpful! !
Happened to me, I did a buzzcut and started over. Lol
same here, did this mistake, tried to fix it and after 20 mins without improvement I was like "fuck it" and shaved my head. Medium long hair to bald within a few minutes.
@@LakituKoopa yeah, its just hair, it will grow back.
@@seantran5011 true, most likely it will take about 2 months to reach a short length so it won't take too long and will be back in no time. Even though it was not planned and an accident, it does not look that bad. I kind of like the new style, maybe I'll keep it for a while...
Can you please please do Hawk's red hair from Cobra Kai
Have to say, that Mannequin is rocking that Uneven undercut mullet look, though!
You can always take more off ❤
No offence, but I find it kinda odd to have a bald guy give a tutorial about undercuts
That mannequin has great hair
Yeah I’ve totally cut mine too high and looked like a clown for 6 months
Wow feel like brand new fresh contenet! Good job!
Wow sir hard work so naic
Thanks sir
Low undercuts work if your hair is long enough to tie back.
Day 26 of asking a Robby Cobra Kai season 4 haircut tutorial
7:28 Typical "undercut" 1 guard all the way up would completely butcher my hair. One barber even "lined me up" took me a good year to get my length back
The best
😢
I think I'll be getting an undercut
P.S:my hair is really grown out bit its not medium length,is it bc my hair is too thick or too flat?
BTW it's straight and curly
Thanks,Stephen ✌
i wan't it to fall down??
do what u want dont listen to him lol
do what u want dont listen to him lol.
I let my 14 year old give me an undercut and I got the too high up version... lol 🤣😂🤣😂🤣
Mine is too high, and if I shave the sides too short I look like a pineapple. 🍍
This video came out 3 years too late for me.
😂
So did he explained the right way Or wtf
Tom Holland long hair tutorial
❤
What happened back hair undercut
There's absolutely no difference between the low left and low right versions. Hair on top "wants to drop" equally. So that part of the video is kind of worthless. The idea of wanting to avoid an undercut that is too high.... duh. Blindingly obvious.
The biggest mistake is getting an undercut to begin with.