PROBLEM SOLVED REMOTE CONTROLLER DJI PHANTOM 4 PRO PLUS CAN'T CHARGE
ฝัง
- เผยแพร่เมื่อ 15 ม.ค. 2019
- #djiphantom4pro #djiofficial #djijakarta #djirepairjakarta #djidrone #channelhobby #djisupport #djitechnicalsupport
issue that occur in the remote control phantom 3 phantom 4 and phantom 4 pro plus this is a lot. from starting to not be able to charge, the LED indicator only lights up in the first LED and the beep. Remote can not turn on.
and this video is a problem solved 100% fix , from one of the many issues that occur.
warranty claims take a long time and the shipping costs are quite large. after returning from dji, the same problem repeated again.
u need help ..??
whatsapp : +6285884468688
instagram : solmed_olenk
facebook : olenksimatasolder - วิทยาศาสตร์และเทคโนโลยี
![FIXED! DJI Phantom 4 Pro Remote Control Battery Charge Issue [Disassembly, Repair, Reassembly]](http://i.ytimg.com/vi/6pr6YhdnOYg/mqdefault.jpg)
Thank you, this fixed the problem!
Thanks for showing you have patience for many of us don’t have, it shows that each one of us has a different gift and I can see that yours is patience thanks
A very useful video. I found it necessary to mute the unpleasant music.
Thank you information helpful
Solmed Olenk: Thanks for the Video. Did the same thing which you showed and fixed the battery charger ( RC). It is charging 98-100%. did not have any flux so did not use any and heated for 2-3 seconds twice. My remote was showing only one light on the indicator, but now it is showing all the lights during charging. only request is if you can narrate during the video will be helpful for everyone. For me the visual was enough. Thanksssssssssssssss again.
Thank you very much .. with your tutorial I solved the problem of charging the Pantom 4 Pro plus battery 100% .... you are a great ...with estimates Roberto
Good job bro..👍🏻🙏🏻
Baru mantap ne 👏👏👍👍
This is just a temporary fix. Just buy the IC part number 2015CS. Install and your good. Part numbers CW2015CS, CW2015CSAD, & TDFN8 will also work if you can't find 2015CS.
Me.ppdes mandar la descripción del repuesto y como lo isites gracias broo
Hi, thanks for video. What was the solution you added after the heat reflow?
Hi, what are the 2 points you are touching with the tweezers on the board?
thanks it's work's
great video. I thought about that with the flux to. What temperature do you set the heat gun to? liquid melting point of tin is between 218 - 230 degrees celcius, starting at 183 - 190 getting mushy. and how long do you hold it? I'm concerned about breaking the electronic parts or melt it loose.
Worked for me thank you very much.
You're welcome 💪💪
Very good bro
Do you recommend the same solution you did If the controller doesn’t fully charging (up to 81% and draining down quickly) ?
Very good video. I am off to a bad start though. :) Cannot even remove the cover at 3:09 What screwdriver/torx? is that. The instruments I have do not fit. Can you enlighten me please? Thanks!
what radio defect you fixed could help me and the same as mine
Sir phantom 4 pro+ 2.0 me siganel vik antina Arjest Btata hai to kya kre
What is the temperature of heating and how long you did it?
Amigo o controle do meu drone spark Também não tá conectando se eu fizer este processo ele pode reconectar nava mente? E como vou saber qual o lugar certo pra fazer esta ligação no controle do Spark grande abraço me ajuda
i don't understand.. please use english
mun teu daek full ngecasna bisa ngomean teu kang
Sir howmuch hitting ??nd howmuch time to hiting this ic ?
query: what liquid do you add with the brush? Thank you
Flux
Sir phantom 4 pro siganel vik antina Arjest btata hai to kya kre
Remote Phantom 4 pro + sy jg sm pnyakitnya om, sdh prnh dbawa service 2x, msh ttp gk bs normal
Diply and tuch don't work can help me
THANK YOU MY CONTROLLER COMPLETELY DEAD AFTER FELLOW YOUR VIDEO... WTF
Same remote, same problem. Thanks a lot! 300 C° or more? Two days later...........Had to do it two times. My heat gun was at 330 C°. Seems it works now.
Hello, 330° ok but you heat it for how long?
@@MrDimibass As far as I remember, it was 30 seconds. But after two battery loads, I had the same problem. In the meantime I bought a used remote.
At 7:12 why do you skip so much of the work and not show how you removed that piece? I was following you step by step and it was all going great until you jumped to you doing something steps ahead? Is there something we are missing here?
Please see again my video..i'm not remove or replacement ic..but rehot only.
Remote phantom saya juga Sama...
Sudah selesai om..?
@@solmedolenk582 Sampai sekarang blm diperbaiki...
G bisa charge mati lampu mereun haha
Очень долгое видео.Можно было бы местами ускорить,обрезать лишнее,короче сократить до 10 минут.Ибо люди не любят долгие поучающие ролики!
Are bhai ye number to h hi nhi whatsApp pr
dreadful music, how can you concentrate with that racket
Secara teori kenapa bisa begitu min?
Koi contact number ho to doo