The 325 will push a lot of material for its size and weight. 9,500 lbs and 75 hp. Hydraulic flow and pressure are great for this sized machine especially with high flow. Of course the 333 weighs about a ton more and has 25% more horsepower at roughly 100 hp. So yeah the 333 is going to push quite a bit better than the 325 but the 325 can go places and do things at the 333 can’t because of its size and lighter weight. So, as far as I’m concerned they’re both great machines you just have to pick the tool that works best for you most of the time unless you can afford multiple machines and then buy them all 😅
The Deere 325G appears to be a great host for a mulcher. Plenty of power to work
Is that a standard flow muncher? Or is your high flow not on?
Nice video. Do you wish you had went with the 333g or does the 325 do everything you need
If you compare specs on the Deere site the 325g is almost the same on pump and flow. You can flash the ecu on your 325 to make more hp than a 333.
They dont have the weight to push material. A 333 is basically as strong as a 450 dozer.
The 325 will push a lot of material for its size and weight. 9,500 lbs and 75 hp. Hydraulic flow and pressure are great for this sized machine especially with high flow.
Of course the 333 weighs about a ton more and has 25% more horsepower at roughly 100 hp. So yeah the 333 is going to push quite a bit better than the 325 but the 325 can go places and do things at the 333 can’t because of its size and lighter weight.
So, as far as I’m concerned they’re both great machines you just have to pick the tool that works best for you most of the time unless you can afford multiple machines and then buy them all 😅
Is the mulcher a low flow . It dnt like those trees
Why are you running carbide teeth on a big tree job?