Cadillac Escalade Ballast Completely Eliminated, Watch.

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ม.ค. 2025

ความคิดเห็น • 43

  • @elijahgoodman3140
    @elijahgoodman3140 20 วันที่ผ่านมา +2

    Can you do this with a 2007 cadillac dts?

  • @EIBLG
    @EIBLG ปีที่แล้ว +4

    Bro.. I appreciate your time in this video and the FREE information.🤙🏾

  • @adog1275
    @adog1275 ปีที่แล้ว +4

    I appreciate this video thanks you saved me a ongoing headache the only thing I did differently was instead of cutting the end of the connector I wired in a pigtail so that way in the future I can replace the light without cutting it again

    • @rcaldwell56
      @rcaldwell56  ปีที่แล้ว +1

      I'LL UNSCREW THE CONNECTORS, THEN WIRES RECONNECT THE WIRES, THEN RE-SCREW THE CONNECTORS, "DONE"!😉😎

  • @thishandleisalreadytaken
    @thishandleisalreadytaken ปีที่แล้ว +7

    the ballast does not fail because of water splashing up. it fails because of condensation inside of the headlight housing which then falls down into the ballast connector. the ballast is sealed from the bottom but not the top. you can see at the end of your video that you have condensation inside of your headlight housing which caused your ballast to fail.

    • @rcaldwell56
      @rcaldwell56  ปีที่แล้ว

      YEAH, BUT DID YOU CHANGE YOUR ORIGINAL HEADLIGHTS OVER TO L.E.D"S. AFTER UNPLUGGING, AND SHAKING THE WATER OUT OF THE BALLAST?

    • @thishandleisalreadytaken
      @thishandleisalreadytaken ปีที่แล้ว

      @@rcaldwell56 I removed all the condensation and lightly injected air to find the source of the leak, and then sealed it with the proper sealant… And then regained use of my HID system, instead of putting LEDs in there and cutting up and splicing factory wire harness with Chinese LEDs

    • @joshlawill
      @joshlawill ปีที่แล้ว +1

      ​@@thishandleisalreadytakenwhich sealant did you use?

  • @raworthyel3786
    @raworthyel3786 ปีที่แล้ว +1

    My savior for my dilemma today. THANK YOU!

    • @rcaldwell56
      @rcaldwell56  ปีที่แล้ว

      🤭😉👍 Since I aired this video, I never looked back! NO PROBLEMS ONCE SO EVER!

  • @JimCabe
    @JimCabe 9 หลายเดือนก่อน

    Thnx for the example. I understand it better now

  • @LovenotHate130
    @LovenotHate130 9 วันที่ผ่านมา

    Much love thank you in 2024 ty u boss you help me so much ty

  • @cjack101730
    @cjack101730 8 หลายเดือนก่อน

    Thank You! May all the good Graces shine upon You.

  • @gordongabaree8332
    @gordongabaree8332 หลายเดือนก่อน

    Dam good video. Thanks?

  • @waynec17
    @waynec17 11 หลายเดือนก่อน

    bro you are the best !!!

  • @bigchungus2113
    @bigchungus2113 3 หลายเดือนก่อน

    Do the high beams work normal after the install?

  • @OurTreasuredHome
    @OurTreasuredHome ปีที่แล้ว +1

    Fantastic thank you for sharing 🥰

  • @chadbailey1126
    @chadbailey1126 3 หลายเดือนก่อน

    I cannot find a set of these bulbs that have wiring . they all have a plug. I thought this would be easy to do but I have nothing to wire it to.

  • @djcliffyc
    @djcliffyc 2 ปีที่แล้ว +3

    Good info thanks

    • @rcaldwell56
      @rcaldwell56  2 ปีที่แล้ว +1

      Just trying to help.

  • @raworthyel3786
    @raworthyel3786 ปีที่แล้ว

    It works exactly as stated! Thanks so much.

    • @rcaldwell56
      @rcaldwell56  ปีที่แล้ว

      YOU'RE QUITE WELCOME!😉😎👊👍

  • @brandonrobinson-k8j
    @brandonrobinson-k8j หลายเดือนก่อน

    Do anybody no where I can find ballast mine didn’t come with it

  • @ScrappyDooToo
    @ScrappyDooToo 2 ปีที่แล้ว +1

    How do they compare to the original HID bulbs for night driving?

    • @rcaldwell56
      @rcaldwell56  2 ปีที่แล้ว

      THEY'RE A LITTLE BRIGHTER, BUT NOT BY MUCH IN MY OPINION.

  • @rolandjones6277
    @rolandjones6277 2 ปีที่แล้ว +1

    Thanks buddy I needed that I just want and Brot new light

    • @rcaldwell56
      @rcaldwell56  2 ปีที่แล้ว

      JUST TRYING TO KEEP FOLKS OUT OF OUR POCKETS!😉

  • @diddyp7126
    @diddyp7126 2 ปีที่แล้ว

    What about the light over top of that light I want all my lights to work do I have to do the same thing with those lights too

    • @rcaldwell56
      @rcaldwell56  ปีที่แล้ว

      I'VE NOT HAD TO CHANGE THE UPPERS YET. STILL LICKING, AND TICKING!

  • @flowercristales7998
    @flowercristales7998 2 ปีที่แล้ว +1

    I have too much trouble with those lights.

  • @JoseLopez-xq6ui
    @JoseLopez-xq6ui ปีที่แล้ว +1

    Bad idea how are you going to have high beams?????? For dark roads????

  • @rafaelnavarro8857
    @rafaelnavarro8857 2 ปีที่แล้ว +1

    It’s not going to overheat or burn my led ? Thinking of doing it rn Bcs someone wired one of the headlights to be halogen before I bought the car but one side still has hid .

    • @rcaldwell56
      @rcaldwell56  2 ปีที่แล้ว

      FOLLOW THE VIDEO INSTRUCTIONS, YOU'LL BE FINE!

  • @sacraficiallandsacraficial9666
    @sacraficiallandsacraficial9666 ปีที่แล้ว

    Bravo

  • @timhansonservices3374
    @timhansonservices3374 ปีที่แล้ว

    Now you don't have high beams u should've bought the right bulbs

  • @danthonymonet9400
    @danthonymonet9400 9 หลายเดือนก่อน

    Audio is very low. I can barely hear you.

  • @Charlies_Corner
    @Charlies_Corner ปีที่แล้ว

    Why are we using house connectors on cars? Those blue twist connectors are for houses not cars, they make heat shrink connectors for cars..

    • @rcaldwell56
      @rcaldwell56  ปีที่แล้ว +3

      I HAVEN'T HAD ONE PROBLEM SINCE I AIRED THIS VIDEO, RAIN, SLEET, NOR SNOW. WORK SMART NOT TAKE ALL DAY DOING THINGS!🤓👍

  • @threebfishing1528
    @threebfishing1528 ปีที่แล้ว

    Why are talking so low Bro.

  • @keylajolee3898
    @keylajolee3898 2 ปีที่แล้ว +1

    【promosm】 ✨