Bringing A Knife To A Bear Fight
ฝัง
- เผยแพร่เมื่อ 27 ก.พ. 2024
- Welcome to Ron Spomer Outdoors! In this episode I sit down with Charles Allen the owner of Knives of Alaska and Diamond Blade Knives to talk about a bear attack he survived, and the knives he makes.
Subscribe to my channel: bit.ly/RonSpomerOutdoorsSubscribe
Affiliate Links:
Links:
Website: ronspomeroutdoors.com/
Facebook: / ronspomeroutdoors
Instagram: / ronspomer
Who is Ron Spomer
For 44 years I’ve had the good fortune to photograph and write about my passion - the outdoor life. Wild creatures and wild places have always stirred me - from the first flushing pheasant that frightened me out of my socks in grandpa’s cornfield to the last whitetail that dismissed me with a wag of its tail. In my attempts to connect with this natural wonder, to become an integral part of our ecosystem and capture a bit of its mystery, I’ve photographed, hiked, hunted, birded, and fished across much of this planet. I've seen the beauty that everyone should see, survived adventures that everyone should experience. I may not have climbed the highest mountains, canoed the wildest rivers, caught the largest fish or shot the biggest bucks, but I’ve tried. Perhaps you have, too. And that’s the essential thing. Being out there, an active participant in our outdoor world.
Produced by: Red 11 Media - www.red11media.com/
Disclaimer
All loading, handloading, gunsmithing, shooting and associated activities and demonstrations depicted in our videos are conducted by trained, certified, professional gun handlers, instructors, and shooters for instructional and entertainment purposes only with emphasis on safety and responsible gun handling. Always check at least 3 industry handloading manuals for handloading data, 2 or 3 online ballistic calculators for ballistic data. Do not modify any cartridge or firearm beyond what the manufacturer recommends. Do not attempt to duplicate, mimic, or replicate anything you see in our videos. Firearms, ammunition, and constituent parts can be extremely dangerous if not used safely. - กีฬา
Right after I left Anchorage back in the '80s, my Dad relayed the story of a young couple confronted by a polar bear! Armed only with a knife, the man attracted the bear's attention away from his pregnant girlfriend so she could escape. After they recovered his skeletal remains with his knife they found the bear about 50yds away, slumped over dead...
Al Burnett was a bear guide and family friend back then.
why skeletal remains? did the bear eat him?
@@JohnnyDanger36963 poor choice of words maybe
He must have been one tough and brave guy! Sorry he ultimately lost his life but that’s what a real man is made of! Someone who isn’t afraid to take on the world’s largest land predator with only a knife!
Now THAT's a hunting story worth telling!
A 400gr projectile traveling at 2700fps has 6473½ ft-lbs of mizzle energy 😳
ITS A PUSSY GUN THE LOWLY 458WM BEATS IT WITH 500GR NO ONE CARES ITS JUST A SALESMANS STORY--CAUSE YOU SHOUD BUY HIS OVERPRICED KNIFE.
It's no mack, but damn..
458 HAS 500GR BULLET MORE ENERGY BUT WHO CARES?
@@peanut3050 * Not by a long shot can a .458 Win. Mag. come close to 6473.5 ft. lbs. of M.E. You'll have to up grade to a .460 Weatherby Mag., or a .450 Watts to beat that amount of M.E. The .458 Lott does however come real close.
An adrenalized bear is unworldly as to what it can take before it dies
I'm actually shaking after listening to you. It took me back to the jungle in Vietnam on patrol. I might be too old to bear hunt... Thank you my friend.
I doubt it’s so much your age. It’s more so the story of your life and what you had to go through already. While my opinion doesn’t mean squat I think you earned your rest brother 👍
Even though this story turned into an advertisement for his knife business, it still was entertaining!
That's the spirit, Rory. So many are complaining because this wasn't a story about someone stabbing a bear. For my money, coming to hear a story like this is easily worth the $ everyone has paid to watch it. And we get to learn about the latest metallurgy used to make what has proven to be the longest lasting knife edge yet tested.
Holy smokes I remember seeing this video when I was a kid and thinking, “wow he handled that like a pro and tried everything to get her to stop”. Haven’t seen that video in ages. Great to actually hear the full story!!!! Thanks guys!!!
Dude is an absolute unit
He is the real deal
NO-----HE NEVER USED A KNIFE ON A BEAR IN HIS LIFE---JUST A WASTE OF TIME COMMERCIAL.---BAD MOVE FOR RON.@@RonSpomerOutdoors
Awesome fkin story!!!
@@RonSpomerOutdoorsdamn sure is buddy
@@peanut3050this guy gets it
I’m retired, 81 years old, was a Tool Maker, served an apprenticeship with “Packmayr Gun Works” (L A, CA. 1962/66) Also worked in many Shops & a University, (WSU, Pullman, WA. 4 decades, Mech. Engineering) Was also a dedicated hunter & part time Knife Maker for 5+ decades! Loved making knives!!! Enjoyed the Video very much! All of it! From the Bear Hunt to the knife manufacturing.
Thank You Mr Spomer. I’ve read your articles for many years, now enjoy you on TH-cam. Everything written by you made sense!
what knife do you recommend for bear defense?
@@JohnnyDanger36963The knife you have on you !!!!
Thanks Renef. I lived near Pullman back in the mid 1980s. Did you know G. Hoenig at Packmayr? Gun making genius.
how about alsheimers?
i love that.
he is a good guy, great ethics.
dont kill a bear for nothing, it is a huge animal, it is a hunter just as we are.
what a great inspiration of a true outdoorsman 😊👍
Right now, in my country, the bear season was expanded, because of more reports on bears coming out to the settlements, killing cattle, dogs, breaking into trash cans and being a threat to people. The amount of hunters is decreasing, and bear license got quite expensive overtime, because nobody shoots bears for anything but trophy value - they're barely edible and infested with parasites. So the bear numbers are growing.
Personally I expect the government to place bounty on bears like regional governments place bounty on wolves.
Ask Gene Moe about bringing a knife to a bear fight. He managed to kill a bear with a buck knife. Total badass. He got mangled pretty bad, but lived to tell about it.
Ask Chase Dellwo what to do if you don't have a knife.
@@jacobmccandles1767my grandad told me if you're attacked by a tiger you put your hand down its throat, grab its tail from inside and then whip it inside out.
@@davenickname xD
The stories were worth the price of admission but the blade info is priceless. I like this kind of content and would be interested in more like it. Thanks Ron.
… just call it a knife review with a bear hunt story
I think the knife to take to a bear fight should have at least a 30” blade😂
Or maybe an 18” double edged blade with an 8’ handle, aka spear.
Or quit being a baby
@@Ds07777 tough guy huh….
I know right? All the talk about the whole event being caught on video...
I have a little Knives of Alaska knife. It was given to me by a taxidermist from Anchorage in 2000. It was one he used here in South Africa on a hunt.
This was a great episode.
Ok the knife nerd in me is loving this stuff
Thanks for the interview, Charles Allen and Ron, both the stories and the info of the Alaska/Diamond knife brands.
This is the caliber of information that I have come to cherish from Ron. They're getting into material grain structure!
Fantastic video. Charles is def the guy you want on a brown bear hunt. Cool, calm and collected. The knife portion was excellent as well. My biggest fear, however, is losing a knife in the field. Accordingly, I bought a Benchmade in bright orange. Haven't lost it yet.
Excellent point, Scott. the only thing sillier than a camo knife handle is a camo flashlight! Except a brilliant idea for manufacturers because wanna be rugged outdoorsmen fell for it. This is USA where looks trump performance too often. But hey, it's a free country and if buying things for their "look" makes one happy...
He tells everyone to run...
And the camera man simply sets up for the perfect take!
I love this show, and appreciate this story! Great interview Ron and Charles, cheers from South Carolina.
Thank you both.
Both these gentleman look as rugged as the Rockies and tough as steel.
What a great bear story. When I was a youngster I did a backpack trip in interior Alaska. Saw bears and paw prints. Those bears are huge. I was nervous for the whole time, but had no problems. I did a lot of singing as I walked.
I was watching the video about the bear hunts. When you all started talking knives. I had to stop and think, Knives of Alaska. Heck I own one. Got it from a young guy oh better part of 25 years ago. I keep in the gun case paired up with my best deer gun. Now I know more of it's history. Thanks for making a great knife.
I think, I have 5 Knives of Alaska. They are great knives. I have bought a few and gave them away as gifts.
Always hear how great they are from the people I gave them to.
Take care.
Man oh man! This was a GREAT episode, Ron! 🎯🎯🎯🎯🎯
This was a great show! A fantastic storyteller!
Impressive Ron! Thank you for sharing! I wouldn't want to be in that situation.
I've encountered two of these big brown 's fully mounted. Looking them over is impressive, the teeth, claws, and massiveness is humbling. Each time I listen to the encounter it takes back the Black Death Cape Buffalo shot Alen Duckworth accomplished on film. Good work!
I carry a stag gripped Cold Steel Trailmaster on my off side, and a big bore revolver on my strong side. When I'm in bear country. Both of these are a back up to my rifle. I hope I never have to go to it; but its there if I need it.
Just wanted to say …I really enjoyed this vid, great story. Thanks for the info on the knives, very interesting.
Charles is such a character.
Fantastic story I enjoyed listening in on this conversation very much
I’ll be having a look around at diamond blade knives
I've been patiently waiting for a knife video from you, definitely would love to see more!
This guy has become a Legend.
Marvelous storytelling.
I was in a small gun shop when an old German who worked in the oilfield came in and commenced this story: "I vuss checking on a gas well undt I saw a black bear cub yust before I heard a grunt undt saw a black bear sow charging. It vuss a goodt sized bear, about three hundredt fifty poundce. My rifle vuss in ze truck but I had a goodt big knife on my belt undt I used it to defendt myzelf mit slashing. I don't know how I climbed ze fence because normally I couldn't clamb zat fence forwardt but zummhow I climbed it bakwards mit a knife in one hand undt I got my rifle undt shot ze bear. Undt now I smell zummthing like shit, undt I looked in my pantss, undt there vuss shit!"
The sheer power of the Bear being stopped that suddenly was completely arrested by the force of the perfect power of the rifle you used with the 411 round. What an incredible story.
Great show and awesome knives!
60 miles an hour is 88 feet per second - that's what they teach you when you are getting ready for your driver's test. A brown bear can run faster than 30 miles an hour - that's over 44 feet per second. 44 feet is near 15 yards - most of a house length. In 1 second. Not enough time to pray; barely enough time to aim and pull. I'd rather make the choice at, say, 150 yards. From inside a Humvee . . .
It's said they can run down a horse - horses can run faster, but not for as long. Not only that, but they can also outrun a horse initially, because they accelerate like a bullet. While a quarter horse can run the 100 meters in 6.8 seconds (the record), bears are faster off the line than that - although they can't catch a quarter horse once it gets going (top speed of a quarter horse is 55 mph).
But that's not the whole story. The utterly insane thing about bears is their endurance. Bears can maintain their speed - 25 to 35 mph - for 2 miles. 2 consecutive 2 minute miles. By then, a typical horse has run out of steam. Bears are absolutely phenomenal animals.
Great show and great information on his knives. I need some 🤠
Going pick up one of these knives asap. Great story!
Remarkably cool under pressure and I like his choice of rifle and calibre
Thanks!
Great story!
Wow incredible stories and invaluable lessons! And I thought I had a good bear story with the tomahawk I brought on a bear hunt!
What an experience! Thanks for sharing!
Absolutely one of your most informative and powerful videos yet.
Charles was a great guest to have.
I am a former Alaska native here and I miss it dearly.
I was a Scout up there and you don't screw around. You earn your patches and you earned everything, no substitutes back in the mid 70's. A Scout's motto is to always be prepared. I couldn't remember half the knots that I learned to tie, fish traps, safe houses from sow moose during calving season, etc.
I had at least a half a dozen knives around for different purposes.
I'm still purchasing knives today!
Exciting and a memorable video Ron.
Thank you. 👍
I've heard a few situations like this in my land and I am from Bosnia and Herzegownia, a lot of hunters had some situation with the bear, because you are almost every weekend somewhere in the wild, so it must happens sometimes... Nice Video, I couldn't see the bear, never, I saw just the tracks in the snow, so I knew that he was there around me somewhere, I was kid maybe 10,11 years old without gun of course. In our land we do have brown bears, lynxes and wolves, so there is a lot of animals to see..
What a wonderful gentleman Charles Allen is and what an amazing true story! I remember seeing this video of the take down, and agreeing that it was most certainly a justified takedown! So sorry for the cub, to lose it's mother. As for the mother, she was doing what instinct told her! If only she had realized that this gentleman had no intention of harming her!
It's always sad to have to kill in self defense, but biologists have learned that more bear cubs are killed annually by boar bears (and often wolves) than bullets. The larger issue is that Alaska maintains/protects wild habitats so that bears and all other native species can continue to thrive.
I bought my buddy a KoA muskrat a few years back and he is always bragging on how great a skinning knife it is
Another great video Ron !
Great story. I understand the memory frame by frame...I was chased by a bull moose and each time I looked over my shoulder at it I could see that damned beard thing on its neck flopping from side to side. I got away but not until after a long run...
R.S.O. --- Very good guest, and good hunting/shooting account. Good looking and functional knives. I lived in Alaska for five years, and bears are unpredictable. There were Blackies and Brown (Grizzly) bears in the area. Make noise and they often will go away. Surprise them, and they often will charge.
One night I heard grunting and small growl sounds. Turned off the lights and went to my closet and loaded my Sako AV , .300 Win Mag., and loaded my 12-gauge pump shotgun with slugs and my wheel gun just in case it came into the place...(( Mobile homes are not very thick or strong )) ... Bear left my place, but I kept the guns loaded all night. In the morning, I went outside, and my trash can was smashed flat. My neighbor said: "We had a bear here last night"... it was on my porch grunting, so I turned on the porch light and started banging two pans together and yelling "Go Away Bear!" and it trotted off into the bushes." Be prepared because you never know.
{The Alaska State Troopers carry 12-gauge slide-action (pump-action) shotguns loaded with 12-gauge rifled slugs for Bear control.}
great story, nice guy, amazing knives. 😀
Awesome
I feel like the bear hunt stories and the video of the close call was worth it to sit through the knife advertisement this video turned into but I also learned some things about knives I didn’t know so that was cool too. Think I may be buying a new knife soon as I already took a break from the video to go to both websites and already have my eye on one of his auto folders😂
Great interview.
Is the footage y’all showed the same footage he’s talking about? In the video the bear charges and then turns around and runs away, then collapses a bit later. They way he made it sound was that he shot it and it dropped instantly, as it was charging him.
Maug, I suspect the bear fell at the shot, unseen under that roll of hill, bounced up and dashed her death run as shown. But even if not, I"m not going to second guess the recollection of a man who lived through that experience.
I can't even imagine how scary that was. I do think Mr. Allen needs to watch his own video again to refresh his memory on how the bear reacted to the shot lol. No hate from me, I have no doubt some of my hunting stories have morphed a bit over the years. My personal "bear knife" is a Kabar Becker BK7 because its the biggest, longest and strongest blade I can manipulate quickly. I have a BK9 but it's to heavy for me to manipulate fast enough to fight with.
I like the clever idea on Alaskan knife round top good skinner
I was born and raised in Fairbanks Ak and truly enjoyed your guest speaker. Wow! What a tough guide. I wonder if he ever met a guide in Alaska named Hal Waugh?
Loved this episode
I spent 85 bucks on a caping knife.way to hard.the edge would actually flake off.i gave it to some kid.went back to my 12 dollar old timer fixed blade.never looked back
*Question* I am setting up my 7 prc rifle to use Leupold custom dials. I want to use either a 160 gr copper bullet such as the Barnes lrx or the new hornady cx . Or would you go with the 160 nosler partition or accubond bullet. The rifle will only be used to hunt moose or black bear. I will be hunting in Maine or New Hampshire. So the longest distance would be out to 300 yards.
It's amazing how fast and how clear you can think and judge the time that you have remaining. Ask me how I know
If you retell to some one, even an "expert", everything that went through your head in even 1 second, they won't believe it. Unless they have gone through a life-or-death situation themselves.
are you talking about that time you snuck up on a cheeseburger?
@@JohnnyDanger36963 I'm talking about the time I was over at your mom's house
Very cool, its the first time I've seen using a dedicated knife for the initial incision. Good info! I would love to see the bear attack video too!
Good, Thx
Great story, great advertisement.
Enjoyed the chat.
I see that you use D2 steel. I wonder what you could do with CPM Magnacut?
Make a more expensive knife, lol.
This man s a living legend
I'm imagining a full 80's action sequence. They are circling each other with dramatic music. The guy tossing the knife between his hands just waiting for attack.
That was an amazing scary story😮
Great video and appreciate it. Also good information.
GREAT VIDEO IF YOU LIKE THE OLD MANS COMMERCIAL
@@peanut3050 Jealous because he makes good knives, and you buy the cheap trash from communist China?
Great story
GREAT VIDEO IF YOU LIKE THE OLD MANS COMMERCIAL
@@peanut3050 Given what the old man had done? I think he deserves a commercial and what would you have done in the same situation?
@@Music-lx1tf * He would feed the best a peanut. Lol.
@@peanut3050 Peanut is a good name for you yaa jealous pea brain.
Beautiful knives and absolute legends. Enjoy your content but title on this one is a bit misleading.
Perhaps, Jace, but we didn't say Using a Knife in a Bear Fight. The knife was at the fight, and then did the skinning after the fight. I felt the story and information made the interview worth the cost of admission. Would you agree?
@@RonSpomerOutdoors I agree, great stories from experienced outdoorsmen. Your audience appreciates you, we will continue to watch your content and show support without clickbait titles.
Great story, thanks Allen and Ron!!! On May 20, 2022 my wife and I had an unfortunate encounter with a black bear that came into our home after we tried yelling out our window to scare it off. I ended up fighting with the bear while my wife was able to grab a kitchen knife. She stabbed the bear, which got it off of me, and I was able to retrieve my 9mm handgun to shoot and kill the bear. Our DNR was very helpful with the while incident and I was able to get the bear back to do a skull mount and tan the hide. Story of a lifetime!!!
Great video and great story
GREAT VIDEO IF YOU LIKE THE OLD MANS COMMERCIAL
@@peanut3050 Do you think that using all capital letters makes your stupid posts more important?
Amazing story. Gene Moe used a Buck 110 and a stout left hook to kill an Alaskan brown bear back in the 90s. Can’t argue with the 110 after that!
On your cleaver knife, it would be great to add a point on the very end of the Tang, that would stick out past the handle, so since the blade section is missing a point, you now still have a point that can be used with that knife, so that knife now has more capabilities of a normal knife, with every feature of every knife. 🤠👍
I’m looking at his webpage now . Very reasonably priced
In Romania hunters have a saying that the bear knife is made of wood. It's supposed to screpe the sh*t off your underware after the bear has left.
RON IS THE ONE SAYING THIS GUY KILLED A BEAR WITH A KNIFE---THE SALESMAN NEVER SAID IT.
Ron never said he fought the bear with a knife.
For all you knew, they were going to talk about bringing a knife to a bear fight. There's zero suggestion--in the title of this video--that this man fought the bear with a knife.
I watched the whole video never heard him say that the guy killed a bear with a knife
WHAT DID RON SUGGEST? WHAT DOES THE TITLE SAY-IT IS SUGGESTING THAT A KNIFE WAS USED TO FIGHT A BEAR.@@gavinlybarger8056
I made a knife once with some kind of spring steal.bar stock . WS good enough for sombody to steal.was lots of fun.
I think we are in the golden age of edged tools and weapons
I find that there is some undefinable beauty in the spectrum of high hrc low dps blades that have unfolded, and are unfolding, before us.
In some german castles/museums you can see spears , similar to boarspear, called Bäreneisen.
Rockwell 65-70??? Good luck sharpening that knife ...holy hell
Ron, I enjoyed reading the articles of Jon R. Sundra, whose ... Complete Rifleman series was wonderful. I haven't seen any work from him for years. Do you know what happened to him? Thanks.
John is still kicking and, I'm pretty sure, penning the occasional piece.
Would love to see a podcast episode with this guy, Lynn Thompson, and Jay Neilson
PS . The way things are going,it might not be a bad idea for anybody & everybody to know how to harvest an animal and be able to clean it & eat it. You might not be somewhere like Alaska & have all the big animals available but there is some game to eat about everywhere I can think of. Someone correct me if I’m wrong. For instance,my brother and sister inlaw got involved with animal rescue at some point,not exactly sure of when or how but right after they graduated from school,got married and were starting their carrier,buying 1st house ext…they got a call about 2 little yorkies or silkies or whatever the breed is called. They were brothers. The dogs were pretty healthy for their age(over 10 years old)& circumstances.they were living in Charleston SC,the dogs had been living in a city,I want to say Atlanta GA.?..a city,I know that much… the dogs had belonged to a older homeless gentleman..he almost made it through a particularly rough winter,staying warm under bridges and wherever he could..he had a massive heart attack and died.when they found him the dogs were still on leashes attached to his wrists.According to the other rescue ppl who met my brother and sister 1/2 way with the dogs,he had a cast net in his back pack and was known to,on a regular basis,spread out crackers,bread,popcorn or whatever he had,waited for some pigeons to come to the bait and then put the net on them. In France and other places,they call that squab and charge good $ for it in restaurants. I have had pigeon and it is very good. Like a big dove. Maybe even a little better ..the point is,where there’s a will,there’s a way..take care of yourself ,family,friends and your neighbors .
Over& out..
I have several KOA knives. They are very nice.
It beats a spoon! 😂
What's his opinion on D2 ??
I have several D2 custom knives, and I find D2 is my favorite, Byron Falkner built it for me and it bad ass knife.
Have a Randall #3 - 5 inch I love as well but it's not D2 , just carbon blade
D2 is a very old steel, which has been greatly outclassed by more modern ones. It will still cut, however.
Good bear story,like the metallurgy & design ,but I really like the idea of all that healthy meat in the freezer.
Choosing the G10 knife insert handle raises the price of the "Surge" knife from $299 to $425.
Are G10 inserts that expensive? If so, why? What's so special about them?
I had confidence in the $299 until I saw the markup on the G10 inserts.
If I am wrong, please someone tell me why.
Injection molding is cheap, and the materials are inexpensive. G10 is more expensive, and it either needs to be machined or needs to be hand finished on some abrasives. In either case, that's paying those skilled workers a US market wage, which drives up the cost to produce, and thus the cost for you to buy.
But G10 is also a more "premium" material, less suited to messy field work and more for looking good. And so you might be paying a luxury tax as well. By choosing options less suited for a hard use knife that should be easy to grip when wet and easy to clean, you're telling the company that you might be a "knife aficionado" and not just a discerning outdoorsman looking for a well built tool.
@@theKashConnoisseur
Really disagree! G10 is a one of the most common "hard use" materials. Used in Coldsteel and Spyderco and lots more. G10 is known have great grip, even when wet. You will find knives made in G10 for less than a hundred dollars. I agree that it is more expensive to produce than injection molded, but G10 is by no way a luxury material used to look good. It is not Titanium or mother of pearl.
@@alecliebenberg69 luxury materials can also be durable, such as carbon fiber and forged carbon scales. The thing that makes them luxury is the (usually significantly) higher asking price compared to glass fiber reinforced nylon. And it's not like FRN suffers from being less durable, with the tensile strength being comparable to some grades of aluminum. You can also mold in better grip texture, where for G10 you either are limited to peel-ply, or you need to perform additional expensive machining operations. And yes, micarta and G10 are absolutely used to make knives "look good", because for some reason many people think fiber reinforced nylon is "cheap plastic". There's a whole aftermarket for upgrading Spydercos and Benchmades etc from polymer handles to G10.
@@theKashConnoisseur yeah man, I agree G10 is considered to be more premium than molded handles. I do think it's better than molded handles, just my opinion. But I don't think anyone in the knife world considers G10 a "Premium" material. A good one yes but not a premium like CF or titanium. For instance if you take plain griptilian with S30V and you take G10 version with 20CV, it is 50 dollar increase and you have a steel upgrade. It's not like adding G10 puts you grimsmo norseman bracket. You just have less cheap feeling knife.
G10 gets turned into all shapes take ZT 308.
To go back to @5jjt original question, yes G10 is more expensive to work than frn, but G10 is cheap material. No it's not worth price increase. I love G10, but 125 dollars for a inlay not a chance.
They look good.
DOLLY PARTONS BREASTS?????
Meshach Browning lived from 1781 to 1859, and as a pioneer in Maryland who hunted bear with a knife. He even went so far as to go into the den on occasion.
But what a skilled stud, thank god he had the right tool for the job
As someone who lived in Alaska for over 20 years I promise this was not intentional but sometimes things happen. Definitely not a Cheechako
(18:06) Brown Bear Cleaver Discussion
Duke Andrey Shirinsky-Shikhmatov, who used to hunt bears with guns as well as with spears, wrote a century ago that a perfect bear knife should be a dagger with blade 10,5 inch long and 1,5 inch wide, with proper crossguard and a fuller, a so-called "Samsonov dagger" in particular. Obviously, it's a last chance kind of thing, I would be scared tbh if I'd see a bear charging at me and I would like to take one down with my firearm, without resorting to anything like that. Not to mention that a Samsonov dagger would add more weight.
Makes sense. Alas, by the time hemorrhaging from even a big blade settled the bear, it could have settled you. Doesn't take but a single swipe of those claws to, often, send a man to the promised land. But then again, there are folks who've literally had their faces torn off by bears who've lived to tell about it.
He keeps talking about the video , but for some reason they didn't show it.
Rycallter, that bear attack video begins playing at 6:15 on my screen.