Very interesting video to see what kind of work you do for rope access and what the work and gear you use look like, especially for me as a rock/ice/mountain climber! I had a couple of questions though, hopefully you can answer them. Is there a reason why you work with a twin instead of single rope? And why did both of you drill/place those two anchors, it looked like your main rope would have already covered the entire work height? Thanks, and stay safe!
Hello there, for industrial work like Rope Access you are required to use 2 rope. 1 is for working, the other is for backup incase of emergency. I haven't came across a rope technicians who work with only single rope. Coming to your second question. The reason why bolt the two anchors is because we wanna get closer to the window, we clean those windows. Again, the rule is to never be alone. Always have a buddy & a backup plan before abseil down. Hope it clarifies. Cheers.
My stomach was queasy just watching the video :) No way I am climbing over that ledge on just two ropes. I would need my main, my backup, a backup to my backup, a backup to my backups backup etc and even then I am not sure I could.
Hi there, that is not a chemical. Its just we pumped out the dust and small stones inside so that the bolt could go in much easy and hold securely. It blows everything inside after we drill them.
Oil Rig Jobs sorry my friend, we use Hilti M12 concrete wall plug along with the Petzl hangar. Also, it has been certified and pull tested. We didn’t have the clip of the test since its been done by the Hilti technician. You can add your knowledge more by reading this www.hilti.com/medias/sys_master/h45/h30/9150832738334/HST_FTM_2012-09.pdf%3Fmime%3Dapplication%252Fpdf%26realname%3DHST_FTM_2012-09.pdf
@@iheartropetech9789 AHHH yea i see these guys using those products, i was just wondering. I have a question, next month july, i am getting both IRATA and SPRAT lv1 certified. Where are people getting jobs with no experience?
Oil Rig Jobs don’t you just need one of them? Here in my country mostly we use irata. For the job with no experience part its quite hard to say. Where you from? I’d say try to approach rope access companies and send CV to them. If you are lucky, you’d get the job fast. It took almost 8 months for me to get a job after i finished my irata course. Good luck!
@@iheartropetech9789 thank you the answer, yes normally only need the one, but ime told having both can litterally make finding a job much easier, since there is not a lot of sprat certified people in canada for wind turbine work, and window cleaning with are the only real industries that require them
Great video. Thanks and Godspeed.
Very interesting video to see what kind of work you do for rope access and what the work and gear you use look like, especially for me as a rock/ice/mountain climber! I had a couple of questions though, hopefully you can answer them.
Is there a reason why you work with a twin instead of single rope? And why did both of you drill/place those two anchors, it looked like your main rope would have already covered the entire work height? Thanks, and stay safe!
Hello there, for industrial work like Rope Access you are required to use 2 rope. 1 is for working, the other is for backup incase of emergency. I haven't came across a rope technicians who work with only single rope.
Coming to your second question. The reason why bolt the two anchors is because we wanna get closer to the window, we clean those windows. Again, the rule is to never be alone. Always have a buddy & a backup plan before abseil down. Hope it clarifies. Cheers.
pro la abg ni
wow great skills guys worth top dollar all day booooooom
thanks! get our merchandise at alistore.easy.co for supporting this page.
❤❤ hard wark
Nice Marina View
Ragu Matthew yes. Always loved the views when working
Is that a brick wall or concrete wall?
Concrete
My stomach was queasy just watching the video :) No way I am climbing over that ledge on just two ropes. I would need my main, my backup, a backup to my backup, a backup to my backups backup etc and even then I am not sure I could.
Its okay my friend, you just watch my videos. I do it for you.
That's way you have two anchor and you need trust your instruments.
Good job guys,
Greetings from UK
Nice toe shoes
Thanks mate
Hi, what is the chemical you pumped before the bolt??
Hi there, that is not a chemical. Its just we pumped out the dust and small stones inside so that the bolt could go in much easy and hold securely. It blows everything inside after we drill them.
What country are you guys in??
Malaysia
How to join bro
I already quit
@@iheartropetech9789 oke bro good luck
Mahal ke ambik irata?
Skrg tak pasti berapa, dulu dalam RM3.2k
@@iheartropetech9789 fuh tak banyak kan dia punya tempat. Power power awak semua pun frontliner 💪🏼💪🏼
@@MrApan15 terima kasih. Ha ah tak berapa banyak tempat
Goodluck bro! Kasi panjang sikit video tu 😅
@@MrApan15 baikkk, takut panjang orang tak tengok pula nanti
LOL just using a regular bot wtf
Oil Rig Jobs sorry my friend, we use Hilti M12 concrete wall plug along with the Petzl hangar. Also, it has been certified and pull tested. We didn’t have the clip of the test since its been done by the Hilti technician. You can add your knowledge more by reading this www.hilti.com/medias/sys_master/h45/h30/9150832738334/HST_FTM_2012-09.pdf%3Fmime%3Dapplication%252Fpdf%26realname%3DHST_FTM_2012-09.pdf
@@iheartropetech9789 AHHH yea i see these guys using those products, i was just wondering. I have a question, next month july, i am getting both IRATA and SPRAT lv1 certified. Where are people getting jobs with no experience?
Oil Rig Jobs don’t you just need one of them? Here in my country mostly we use irata. For the job with no experience part its quite hard to say. Where you from? I’d say try to approach rope access companies and send CV to them. If you are lucky, you’d get the job fast. It took almost 8 months for me to get a job after i finished my irata course. Good luck!
@@iheartropetech9789 thank you the answer, yes normally only need the one, but ime told having both can litterally make finding a job much easier, since there is not a lot of sprat certified people in canada for wind turbine work, and window cleaning with are the only real industries that require them
Oil Rig Jobs ive always wanted to work around wind turbines. But my country doesn’t have. Anyways, stay safe