what formula did you used for dst white? and is possible to use straight powder on the dst white ? if yes what temperature did you used for dryer and how many minutes did you used for speed belt! thanks.
+Mel Revitt Thanks for the information. So the polyester film is more stable than the paper for the OKI. We use OKI but we are trying to improve the quality and I see you guys can get a very tight registration. Xerox register better the paper than the OKI printer?
@@melrevitt7083 I'm late to the game to reply but I think there might be some misinformation here. A Xerox 250 (and subsequent models) provide comparable results to the 8080 or OKIs that I'm seeing in the video - these are all high-end machines for this task. Every major print engine manufacturer has brought some form of a chemical-prepared toner to market and refined said toner formulations over the last 15-20 years. Aside from temperature (last I heard Xerox's EA toner is prepared yielding slightly smaller toner particles, so you need to pull the temperature down a bit to account for that) you'll get there with some trial and error to zero in on optimal conditions for your shop equipment and materials used. Speaking from detailed research I've had to put into Xerox engines, their digital presses with EA toner can be expected to perform the same across machines
Good afternoon, I'm Brazilian and I saw your video and I really liked it, I would like to know how many washes the printing lasts in this process
Hello, I would like to know what type of paper do you use?
printer inks, is it normal or special toner?
Thanks, very good video. I hope to see more
what kind of paper is it u said paper or transfers where do i order the supplies
what formula did you used for dst white? and is possible to use straight powder on the dst white ? if yes what temperature did you used for dryer and how many minutes did you used for speed belt! thanks.
DST white 1050 and add 5% DST catalyst, depending on dryer type curing around 80C, belt speed around 2 mins
ما نوع الصباغة من فضلكم
Did you made vakuum table with lights yourself or Nano-print company make tables with lights?
Global Print Solutions make the vacuum light beds.
What kind of paper is used
We use DST Paper and Film. If you are not in the UK contact DST Denmark to purchase.
The vacuum table lights up?
The vacuum light table does light up and helps with registration instead of using tabs, GPS supply them www.globalprints.co.uk
what kind of film are using for the xerox 8080?
+Luis De la Torre
The polyester film is supplied by DST in Denmark
+Mel Revitt Thanks for the information. So the polyester film is more stable than the paper for the OKI. We use OKI but we are trying to improve the quality and I see you guys can get a very tight registration. Xerox register better the paper than the OKI printer?
Distributors in the United States 🇺🇸?
Can I also use white plastisol ?
No...our water based inks only.
Nom de produit mon amis blz
Gini nih klo bule ng afdruk mahalan alatnya
Can be printed with Xerox 250?
No Xerox 250 will not work, contact us through our website for the machines that can be used.
@@melrevitt7083 ما نوع الصباغة من فضلك
@@melrevitt7083 I'm late to the game to reply but I think there might be some misinformation here. A Xerox 250 (and subsequent models) provide comparable results to the 8080 or OKIs that I'm seeing in the video - these are all high-end machines for this task. Every major print engine manufacturer has brought some form of a chemical-prepared toner to market and refined said toner formulations over the last 15-20 years. Aside from temperature (last I heard Xerox's EA toner is prepared yielding slightly smaller toner particles, so you need to pull the temperature down a bit to account for that) you'll get there with some trial and error to zero in on optimal conditions for your shop equipment and materials used. Speaking from detailed research I've had to put into Xerox engines, their digital presses with EA toner can be expected to perform the same across machines