Any pointers for a guy about to install the tps motor sports intercooler kit? Any important things to be aware of for a First timer wrenching on forced air? Would be Greatly appreciated
What’s the rear gear ratio? I have 2012 just the same my 12 came with a 3.55 gear ratio, bought a 2018 rebel it came with a 3.92 gear ratio BIG BIG DIFFERENCE! A world of difference.
@@mikenyikes4943 thanks. Yeah only reason we didnt go intercooler was to stay low on the budget and not have a lot of piping to run. Kinda wanted to keep it simple.
I have a 2014 Ram 1500 2 wheel drive 5.7 Hemi driving down the freeway it kicks down into 4th gear and get stuck there unless I shut the truck off and restart it
Was seriously thinking about getting this super charger on my 09 ram , I already got stainless works long tubes and exhaust, was the installation pretty straight forward?
I'd love to do this to my 2020. Can't wait to see the finished tuning an all..looks a little sluggish from a stop. Could be the video angle tho or something definitely love the sound. Sounds identical to my vortech on my jeep.
Hey Hemi brothers! ,Did you know on the factory intake box . If you move that angled tube exiting the air box so it is grabbing air from down . That 5.7 will get more air then before . After that my guess is you should be able to take off about 4-6 seconds ! Off your 1/4 mile time. On my 2014 1500 4 dr 4x4 my factory air box is getting air from a 4 inch angled and open to a 5 inch tube running down 10 inches and fastened to the frame .. where the air would also be alot cooler.my truck has soo much more pull. Oh yes if you do this ,don't reset the computer afterwards. The compu needs to think that it's getting more air than needed. You'll use way less fuel .
The sound instantly put a smile on my face. 😁 I’m going to miss Atlanta Dragway too. What track is the next closest to you? I’ll probably be headed to Silver Dollar when I get my new project on the road. Hope to see you soon.
@@stormram2783 Yes.. Silver Dollar always seems to be prepped well and the lower elevation helps too. I've run my best times at Silver Dollar.. I hate the 2 1/2 hour drive and some times the crowd can be a little sketchy but it's now my closest 1/4 mile option.
Hey guys Congratulations on the build!! Looking forward to possible racing both you guys sometime in the future. Only problem I am in Wisconsin. 2018 Ram 1500 5.7 NA
It like the icing on the cake, gotta have my cake an eat it too! Right On. Will there be more mods, transmission torque converter, magnaflow exhaust, posi track, an rear with extra suspension kit. What does your son think, he must be proud, very proud
Awesome truck man I like all your videos. If anyone knows anyone looking to ProCharge there ram I have a complete D1sc kit includes everything and a Diablo I3 tuner injectors and four extra pulleys. Let me know. It’s only about one year and half old.
Thanks for the support mopar fam🙏this truck is getting more fun every day 💪🔧
How much are those torquestorm superchargers?
Stock truck??... Some upgrades?.. moore than just torqstorm. Whp about.. ?
Or what shud i do to get about 550-650whp and reliable RAM?
I want to by a torque storm but they don’t have one for 2017ram5.7
Is the process irreversible? If you needed to take it off?
Yes
@FrostbiteRam sorry I just read my comment..I mean reversible. Can I go back to stock if I needed to? Thanks
@LeonelVentura-x7f yes
@FrostbiteRam Thanks makes my decision easier!
Do you need a tune or injectors to run this?
Yes both
Is this the blow off that comes in the kit?
Yes
Any pointers for a guy about to install the tps motor sports intercooler kit? Any important things to be aware of for a First timer wrenching on forced air? Would be Greatly appreciated
U got any tips on installing this on my 2003 dodge ram hemi
Yeah after your done hold on! Lol
@@FrostbiteRam 😂
What’s the rear gear ratio? I have 2012 just the same my 12 came with a 3.55 gear ratio, bought a 2018 rebel it came with a 3.92 gear ratio BIG BIG DIFFERENCE! A world of difference.
Pretty sure this truck is 355
8spd vs barley a 6spd is huge aswell from those years.
I need this on my ram asap 🥴
Do it! Pull that trigger! Lmao. To me it was hard to make the decision, but do not regret making it!
@@stormram2783 if I do I may go intercooler instead of meth, should be interesting, awesome build bro
@@mikenyikes4943 thanks. Yeah only reason we didnt go intercooler was to stay low on the budget and not have a lot of piping to run. Kinda wanted to keep it simple.
@@mikenyikes4943 frostbite has both on his 🤪
@@stormram2783 that makes sense, and more of a simple setup
This thing still running? New to channel but i want a 2013+ 5.7 with this supercharger kit
Most definitely
I have a 2014 Ram 1500 2 wheel drive 5.7 Hemi driving down the freeway it kicks down into 4th gear and get stuck there unless I shut the truck off and restart it
Could be a shift solenoid but I would get a diagnosis first from a scanner or shop.
Got a transmission from the junkyard and the 22 Penn Square connector is wrong different why?
Not sure honestly different year or perhaps 5speed vs 6speed?
Was seriously thinking about getting this super charger on my 09 ram , I already got stainless works long tubes and exhaust, was the installation pretty straight forward?
@joshuaricks7882 easy to install hardest part is ati balancer and it's not really that bad.
@@FrostbiteRam thanks, that’s exactly the set up I want, everything bone stock, nothing to crazy. How much hp does your truck make with that set up?
when you installed your long tubes did you encounter (closed loop fueling not achieved) code? Now my ram wont start
No I had no issues, you do have your front o2s installed right
@@FrostbiteRam yes I put all 4 back in
i wonder if a custom tune shutting off the downstream o2"s will help
@@ChrisCarpenter-d5e I wouldn't think so but tune will definitely help
Shows code P0750 says its transmission pressure sensor
How many pounds of boost you recommend for a complete stock 5.7? Is a daily driver lol
8psi
Is that the stock blow off valve that’s comes with the torquestorm?
Yes it is👍
That torqstorm sure does have a unique whistle, little lazy down low but nothing some bolt ons can't fix.
Little more tuning and she be ready. But yeah this truck is stock stock.
@@FrostbiteRam Those 3.21s are looooong even in an 8 speed. I had to do a double take for the dial as I thought it was a 5/6 speed...
@@GarcBomber this truck is a 6speed
@@FrostbiteRam well shit, thought I saw a dial shifter. Must be on the console, my bad!
@@GarcBomber the dial shifter you saw is for the 4x4
Great content keep it coming it's .a lot of help
Thanks and will do👍
Did my 19’ classic based off FROSTBITE. Followed your videos to a T, and she runs like a champ. That bOv is RIDICULOUS!
Thanks 🙏 and yes the bov is music to the ears 🤣💪💨
They say it's the pressure sensor but the part stores don't even sell it does anyone know anything about it
What HP & Torque does it have OR you dont have that data yet?
Hasn't been on a dyno but track times is coming.
That Supercharger Noise! 🔥🔥🔥
Its amazing 💨💨
Hi,we have a series of Truck and Jeep aftermarket accessories, would you like to review them
Contact me on Instagram or Facebook
Just put a Texas speed cam in my ram after about 1000miles it smokes some at idle only not on a cold start you think a catch can does anything
Sounds like valve seals possible how many miles
57000 Guy that done the work had new seals
@@gregroughton7780 interesting what color is the smoke?
I think it's blue kind it's not very much have to be at the right angle to notice it
Kind of
Can you get away with the clutch fan delete with the super charger?
Yes we will be removing it soon we left it on for the trip to moparty just to make sure we had no problems.
I'd love to do this to my 2020. Can't wait to see the finished tuning an all..looks a little sluggish from a stop. Could be the video angle tho or something definitely love the sound. Sounds identical to my vortech on my jeep.
Still needs a few tweaks but this build is for reliability low boost and low timing.
Badass truck!!! Does he still have that electronic pedal deal on his truck to adjust reaction?
Thanks, no we removed that after custom tuning you don't need one.
Hey Hemi brothers! ,Did you know on the factory intake box . If you move that angled tube exiting the air box so it is grabbing air from down . That 5.7 will get more air then before .
After that my guess is you should be able to take off about 4-6 seconds ! Off your 1/4 mile time.
On my 2014 1500 4 dr 4x4 my factory air box is getting air from a 4 inch angled and open to a 5 inch tube running down 10 inches and fastened to the frame .. where the air would also be alot cooler.my truck has soo much more pull. Oh yes if you do this ,don't reset the computer afterwards. The compu needs to think that it's getting more air than needed. You'll use way less fuel .
The sound instantly put a smile on my face. 😁
I’m going to miss Atlanta Dragway too. What track is the next closest to you? I’ll probably be headed to Silver Dollar when I get my new project on the road. Hope to see you soon.
Silver dollar is 2.5hrs from me but thats my go to now unfortunately but its a good track.
Went to silver dollar for 1st time , and i will say the prep is 20X better than commerce
@@stormram2783 Yes.. Silver Dollar always seems to be prepped well and the lower elevation helps too. I've run my best times at Silver Dollar.. I hate the 2 1/2 hour drive and some times the crowd can be a little sketchy but it's now my closest 1/4 mile option.
@@highflysugar yeah same for us unless they decide to make a truck up north again
Just get a dragy super acurate
They do work well
Been seeing a lot of comments about draggy being off lately and people not being happy
@@stormram2783 not true , i have tested mine a bunch its within .01-.02 of timeslips every time. I trust my draggy more then some tracks.
But neither autozone or O'Reilly sells it. Dealership just said bring it in and pay $150 for diagnostic
Hey guys Congratulations on the build!! Looking forward to possible racing both you guys sometime in the future. Only problem I am in Wisconsin. 2018 Ram 1500 5.7 NA
Thanks man👍💪
It like the icing on the cake, gotta have my cake an eat it too! Right On. Will there be more mods, transmission torque converter, magnaflow exhaust, posi track, an rear with extra suspension kit. What does your son think, he must be proud, very proud
Not sure yet on other mods but I'm sure we're not done yet lol
Awesome truck man I like all your videos. If anyone knows anyone looking to ProCharge there ram I have a complete D1sc kit includes everything and a Diablo I3 tuner injectors and four extra pulleys. Let me know. It’s only about one year and half old.
Thanks🍻👍
Still have that procharger?
@@jimp2952 yes I still have it
Where are you located and how much are you asking?
@@jimp2952 I am located in Albuquerque New Mexico. I’m asking $4500 obo. I have lots of extra stuff for it too.
Woo Hoo, I'm the 9th viewer!!!!!
Lol💪👍