LED headlight bulb 9005/9006/9012 replacement
ฝัง
- เผยแพร่เมื่อ 17 พ.ค. 2023
- Hello Everyone,Welcome to my channel H4H LED Headlight!
We are the LED headlight manufaturer with over 20 years experience,focus on high-end led heaglights.
Head office in China,branch company in Dubai and Panama.
2 brands of the LED headlight,one is H4H,another is TOTA,
Any inquiries about the LED headlights,pls contact us!!
Email:marketing@h4hzone.com
Whatsapp:+86 189 2221 4424
Instagram:h4h_led_headlight
TikTok:@h4h_faro_led_pan (Panama market)
@h4h_led_headlight_bulb (Dubai market)
@tota_farosled_fabrica (Peru market) - ยานยนต์และพาหนะ
Remember if using projectors and the beam pattern looks trash then you need to align the LED's pointing left and right (3 and 9 on the clock).
Thanks for the tip 👌
That’s always been my issue, how about a 4 sided led, should be better right?
9th
Thnx for tip sir
Unless it goes in the side instead of the rear,that needs 12/6
What about the splash cap? Do you put that back? Or modify it because the LED runs hot? Another video please 🙏🏾
No need really , led is usually >50W and halogen is usually 45/55W.
Same power going in, it will come out as heat and light in both cases, the halogen usually runs hotter.
Plus if you put holes in the cap or remove it your headlight will gather moisture which will ruin the internals.
You’d be dumb not to reinstall your splash cap, it’s common sense. If any water kicks up or gets behind the headlamp, it most likely will fry the driver for the LED
Какая мерзость эти лампы ,у них нет ограничений они светят и слепят на всём расстоянии, в деревне ладно а на трассе глаза начинают болеть.
Штатный свет у китайцев также слепит, даже ещё хуже. И галоген +200 и +300 , тоже слепит. Все лампы слепят.
@@ITALY-510у тебя отсутствует мозг. Ты не знаешь что такое направленный свет.
@@Magribinec у тебя то он есть, но забит опилками. 🤣
Каждая фара проектируется под определенный источник света... И дело не с светотеневой границе а в коифециенте засветки. Кому интересно изучите вопрос.
@@ITALY-510 хорошо ерундой болтать, штатные не слепят
Can you put the dust cap back on ?
Thank you so much. This video helped a lot.
Эти диоды уже бичь какой-то на дорогах. Те, кто ставит, для вас отдельный котёл, с прожекторами
A two sided led bulbs with small led diodes that matches the halogen filament will work wonders.
LED are the way to go.
Убери оттудава своя китайская руки, и поставя в назад галогенная
Он свои плоскогубцы найдёт ещё в лобовом стекле. 😂
So that particular resistor doesn’t get hot? I thought it’s suppose to be away from plastics and wires?
Simple and short❤
Never had one that easy.
バーナーだけ交換でHIDにえええ
レンズ
リフレクター
反射版はそのまま
Do you screw the housing cap back for these?
I'm not sure the housing has any air hole there for excess heat. Also, these have an integrated fan; how will air cool in a sealed compartment?
Just got my leds delivered today and installing them tomorrow
How about the result?
@@loktom4068 unbelievable difference, easy to install and they light up the road
@@BigE-qx1jbwhat lights did you use
Mine keeps saying high beem light fault after doing this.
I just got new LEDs to replace my halogen but I can’t get the dust cap back on???
Maybe it’s because it’s too big.
U need an all in one compact led bulbs.
Try Lasfit - LCair.
How are you supposed to adjust to 3-9 position in projection lens if they lock into place?
most leds have an adjustment that moves only the led but not the rest of the housing
It's legal to do something like that. I believe you don't have led mark on headlights
Its 100% illegal
Awesome
Good😊
Does it works on Mazda 323F?
La polaridad no importa? veo que el conector tiene un signo de Positivo y Negativo
Сварочный аппарат
Can you keep 4WD trucks from installing them. They are already annoyingly bright and when they are up high on a 4WD its even worse.
Thanks
I try twisting mine on there and they won’t turn all the way. I’ve tried testing them multiple times but nothing seems to work
If u own a German car, get a PWM module. Pulse with modulation.
That will help stabilize ur led bulbs.
Un Video che dimostri come mettere le abbaglianti sulla Ford Focus 1,6 tdci 2009 109cv anno 2009. Faro lenticolare... (abbaglianti)
Will this fit for a motorcycle?
👍👍👍
What song is that lol
Not rocket science is it , swapping bulbs 😂
Иногда кажется, что строители ракет переквалифицировались в конструкторы автомобилей. Иногда, чтобы заменить лампочку, надо снять фару. Чтобы снять фару, надо снять бампер. Чтобы снять бампер, надо снять колёса.
Wheres ECE homologation
There’s none 😂😂😂 most LED aftermarket are not suited for public road usage 🙄 if you want to buy one homolgated for public roads expect to pay the premium price not like 30€ , I have on my car a set of homolgated osram ones and costed like 150€
@@paulandreichitez5654 if your car has halogen by factory, you can put whatever homologated leds you want, it will still be illegal. That beeing said, I really want to buy a H4 led for my motorcycle😂
Всем привет. А что диод греется больше чем галоген? Что они с этим охлождением идут?
Да и здесь не показывают что крышка теперь не закроется.
Даже если закрыть, то не будет нормального охлаждения.
Die in Deutschland zugelassenen H4/H7 LEDs von Osram sind angegeben mit 19 Watt. Halogen dagegen 55 Watt. Also kein Problem von der Wärme her.
Halogen bulbs are way hotter. Because they get hot as 750 degrees Fahrenheit.
Led bulbs can get between 97-300 degrees. Depending on how bright the led diode is, and how hot or cooled the external or internal driver is.
What's the bulb number H4?
H11
Hat in Deutschland wegen der Blendwirkung keine Zulassung. Betriebserlaubnis erlischt. Versicherung nimmt bei Unfall Regress. Man braucht spezielle Scheinwerfer. 😮
Kann man so pauschal nicht sagen. Es gibt 2 Hersteller, Osram und Philips, die für BESTIMMTE FAHRZEUGE mit Scheinwerfern, die eine bestimmte Prüfnummer des KBA haben müssen, LED-Leuchtmittel herstellen. Dann müssen diese LEDs in einer autorisierten Fachwerkstatt mit einem computerunterstützten Lasermessgerät eingestellt werden. Habe das bei meinem Audi A2 nachgerüstet, einstellen lassen, da blendet nichts. ABE muss ins Handschuhfach!
It only depends on the led bulbs to see which one works better.
Omg noooo!!! 😮😮😮
Do these throw up bulb faults?
It depends on ur vehicle.
9005 led bulb will set in BREZZA 2023 car
for triton 2019
Was kostet das denn jetzt der Spaß .
The 9012 bulb is compatible with the 9006 9005???
Si...9005 y 9006 entra donde va la 9012, pero la 9012 no entra en 9005 ni 9006
does this work in a 2018 KIA FORTE for the 9005 bulb?
Works in my 22 Forte, so I don't see why not.
Go to any parts star they can look that up for you that’s what I did for my civic
Всем любителям такого колхоза, чтоб навстречу одни ,, соплИменники, , встречались!
Ok
What bulbs are they
Worth shit... my dash still rings and shows a low beam out message !
Well out an anti-flicker or decoder on between the led bulb connector and the ur factory wire connector.
Get from Lasfit
Esa viene viendo luz baja?
Перетем ка такие лампы устанавливать убедитес что они были от это компанией проверены и есть разрешение для вашей машины.
lol forget that.
I’d installed the led bulbs, adjust the beam pattern height, adjust the orientation. And we’re all set. Don’t have to ask someone for that nonsense.
Just and no screwing around.
I got a ford 2002 ford explorer I’m changing my headlights and I want to get bright headlights but I wanna know if they can fit tho
How to order
EBay
On my challenger they blink and turn off, I’m going to try to add a cambia decoder
Or try LEDs.
Do 1 for mitsubishi lancer 08-
This is rubbish i put these on my vw they burned the housing inside and had to get rid of them stay stock
They are not rubbish just too powerful for your car
Ur led bulb is fine. It happens for German cars.
What u need is a PWM module, that hooks between ur led bulbs and ur factory wire connector.
After that, ur led bulbs will be fine.
This happens on German cars a lot.
@@konv8no such thing is too powerful lol. That has nothing to do with it.
Hey I purchased two pairs of led low beam lights.
1. Watt 60w (30w/ bulb) & Lumens 6000LM
2. Watt 50w (25w/ bulb) & Lumens 5000LM
I obviously want high visibility but dont want to blind on coming drivers - what do you suggest?
Just get the led bulbs man.
Low beams will definitely will not blind others for that beam pattern.
For high beams u need to see better if it’s not enough for low beams in a very dark area.
Не влезает
Yes it does
Bhai bolero k liye konsi lights he
❤
اعرب امه البييجب من الفيديو هذا مباشر
They should be banned in the cities, ok for off-roading...
lol nah.
No matter where u go. Having led bulb upgrade is nice bright, see better and be seeing better. Without blinding others.
How much the set of 9005
It could be between $45-$100 a pair.
Worthless,
Waste of money,
Spot beam spreads all over and low visibility on highway.
We’ll find another led bulbs that suits better.
Try Lasfit LA plus. Those are better.
How do you know
@@InzemamZahidi911because we run with Lasfit on our Toyota and Scion models. It’s my most recommended brand.
I have H11 Lasfit - LD plus switchback
LA plus 9005 high beam.
My family’s 3rd gen Toyota Sienna with LA plus H11 low beam, LCair 9005 high beam.
And my brother in law’s 05’ 2nd gen Toyota Sienna has Lasfit - LC plus 9006 low beam and LA plus 9005 high beams.
It retains the same beam pattern as oem. With the correct two sided led bulbs, a nice center piece on top, and tiny little led chips matches the same halogen coil filament. U will not blind others. That’s a fact.
If u see those garbage led bulbs that has 3-4-5-6-8 sided led bulbs, a 360 degree led bulbs. Stay away from them.
Those are the ones that will blind others, and it will not focus the same beam pattern as oem.
Those are the ones u should stay away from them.
2 sided led as I described is the way to go.
If it has larger led chips like COB, those are also no good and they are too big to match the oem beam pattern.
@@InzemamZahidi911because we run with Lasfit led bulbs on our Toyota and Scion.
We run with Lasfit, LD plus switchback, LA plus, LC plus, LAair, those are great high quality led bulbs with a very good price point.
No issue and haven’t got flashed by others.
As long as u get the right type of led to match the same beam pattern as oem. That’s no problem.
трек офигенный
Anybody else know what song is playing I want to add it to a playlist
Prix svp
Interdit en france
Who cares. I’d still run with LED’s. No matter what.
The whole process amigo.any Democrat can do dat
lol it doesn’t which or who’s the democrat. Anyone can do it
Eso es una mierda
lol it’s not.
Too bad you lose your horizon with garbage replacement bulbs
Wrong. It has an adjustable collar to fix the orientation for 3-9 o’clock.
Resisters get very hot! And their inside light!
No issues on that. Led bulbs inside and the external driver will be lean against the metal frame. It’s fine.
A to legalne
Nope. But who cares. Upgrade with led is a lot better and mimics the same beam pattern.
И ЧЕРЕЗ пол года фары нахер выкинул👌
Or get something that’s better. Try Lasfit