Just found your channel. Thank you for the content! What exact bleed kit is that? I like your engine bay work surface too, got details? Put affiliate links in your description for free moneys. 👍🏻
Do you let the driver side Rear bleed the same amount or a little less than the passenger side rear? Also whenever you’re bleeding the front how do you know when you’ve bled enough to get all the old fluid out? Is there a torque spec for the bleeder valves or do you just get them snug?
@@LandoWRX about the same. If the fluid is old, it will be dirty, so when you see the cleaner fluid start to come out, you know you’re good. Otherwise I know the capacity and how much new fluid I used. There is no torque spec. Tight, but don’t want to strip them, so just hand tight.
@@Alex_f80m3 Thank you for the reply! i have a 2015 F80 low miles 31K, on my car fax it shows the last brake flush was done at 17K miles and i haven't bothered to check the res like i should have. one day randomly driving the car my front brakes starting sticking really bad, pads not letting go of rotors. i pull over and check the res and it seemed bone dry.. towed it to my house from there. lol i got some fluid from my mechanic and topped off the res and attempted to pump the brakes but no luck the pedal is still stiff. going to try an troubleshoot myself and go ahead and do the brake flush. wish me luck!
Just found your channel. Thank you for the content! What exact bleed kit is that? I like your engine bay work surface too, got details?
Put affiliate links in your description for free moneys. 👍🏻
need some track footage
What Socket do you use for your Lug nuts and at what Ft lb torque do you tighten them?
@@LandoWRX 105ft/lbs. kit from Amazon
@@Alex_f80m3 what kit you go with?
Do you let the driver side Rear bleed the same amount or a little less than the passenger side rear? Also whenever you’re bleeding the front how do you know when you’ve bled enough to get all the old fluid out? Is there a torque spec for the bleeder valves or do you just get them snug?
@@LandoWRX about the same. If the fluid is old, it will be dirty, so when you see the cleaner fluid start to come out, you know you’re good. Otherwise I know the capacity and how much new fluid I used. There is no torque spec. Tight, but don’t want to strip them, so just hand tight.
@@Alex_f80m3 Thank you for the reply! i have a 2015 F80 low miles 31K, on my car fax it shows the last brake flush was done at 17K miles and i haven't bothered to check the res like i should have. one day randomly driving the car my front brakes starting sticking really bad, pads not letting go of rotors. i pull over and check the res and it seemed bone dry.. towed it to my house from there. lol i got some fluid from my mechanic and topped off the res and attempted to pump the brakes but no luck the pedal is still stiff. going to try an troubleshoot myself and go ahead and do the brake flush. wish me luck!