I don't like this Emily. She's nowhere near as accurate as the 2018 Wood Emily model. The face placement is sooooo wrong! It needs to be on the rear like it is in the RWS books by the Rev. Roybert Wilson. There's a *reason* the official wooden Emily toys have a short funnel: *Chuggington destination clearance!* That's also why characters like Harvey and the Breakdown Train only lasted a year in the TWR range - they were too tall to fit under LC56803 Double-Decker Roundhouse (with Elevating Turntable). You did not aggressively sand down Emily until the model was paper thin in order to fit under any destination (including underneath the doors of the Roundhouse), nor did you make the model completely detachable using Mega Bloks bricks (it would be illegal to use Lego bricks since Lego has not owned the rights to Thomas & Friends since 1671). Lastly, she probably doesn't fit on the 33361 Brio Mechanical Turntable, which is pure lunacy. Furthermore, the 2018 Thomas Wood Emily is also perfect because of its correct proportions and face structure, unlike your attempt. It is important to consider that these models need to be able to work properly and fit to scale because they are toys and not models. The models I use in my series are extremely accurate because they are Trainz models. It's clear your customs need work. As the Reverand Roybert said: "you can't do it!" *Edit* If you've read this far, please note that this is a shitpost, and that Gio and I are actually good friends! :)
I own the Wooden Railway Hank, but always found it odd how it both does & doesn't look like a PRR K4s. So my question is, could we get a 'Most accurate Wooden Hank' in the future?
I just got to say your custom here is definitely an upgrade from the original toy. I get that the whole style of wooden railway is to be simplified versions of the models, but Emily‘s model honestly looked more like a 2-2-2 bloomer than a gnr stirling single
It's not an upgrade IMO. It _looks_ good (aside from the face placement), but it essentially minmaxed on looks - that funnel means it can't clear most bridges and tunnels. I do agree that the original official design was bad, though; Emily's proportions suffered *heavily* from the decision to give everybody Gordon-size faces (a decision that should have been reversed years sooner than it was). I think you'd be better off coupling a 2004-2017 tender (where the coal rails are actually part of the jigsaw instead of just painted on) to a 2019 body (which has way better proportions than the older Emily version). Or if you're going to be super fussed about wheel arrangement accuracy, get the 2022 Emily and call it a day.
Dude Emily looks so gorgeous! I will admit Emily definitely has a troubling history with merchandise and while I don't mind some of the merchandise as it's meant to be simplistic this just goes to show that you can make little toys for kids look accurate. It also shows you can take something hideous and make it beautiful too! One of your best customs yet and I hope you make her coaches to go with her. Keep up the good work Geoh!
No, the 2019 Emily shows that you can make little toys for kids look accurate. The 2022 Emily shows that you can make toys for little kids look accurate. This custom minmaxed on looks at the expense of playability, and thus is a very poor toy for kids. It's a good _display_ piece (aside from the face placement), but that tall funnel means you can forget getting it through most tunnels and under most bridges.
@@ZeldaTheSwordsman Whoa whoa whoa whoa whoa whoa! Who are you to come here and start judging. The 2019 Emily isn't even good. And even though the 2022 version is way better it still leaves a lot to be desired.
Wow, Emily looks fantastic, loved watching your process. The Dremel is one of my favorite tools ever, i do most of my customizing with one. Reguarding the paint, I believe your main issue is you are painting a little too close, and too heavy of a coat. It's better to spray an arms length or 6-8 inches away, and do multiple light coats. Doing too close and too heavy, with a mix of cold air will make the paint crack or orange peel. Same goes for the clearcoat, and last but not least, make sure the cans are evenly shakened, and are at room temperature, hope this helps! Fantastic work as always.
Wow! That custom Emily is amazing! And I love the mix of UK and US at the end! I'd love it if you did this for all future endings of videos of your custom Wooden Railway models!
Oh, and word of advice, the Rustoleum spray paint takes around 5-7 days to truly dry from my experience with it, so I’d recommend leaving that paint to dry for a week at most and 5 days at least.
9:42 Hope we can see more of Emily's 6 wheel tender in future, it looks a bit more realistic and accurate in my view. Great video mate, best wishes from the UK as always. 😊 @geohtoy @GeohToy
I think we can all agree that wooden railway never made a perfect Emily until now. Geoh this is such an amazing representation of Emily and it’s MILES better than the actual product well done as always!
I was browsing twitter, and I GASPED when i saw this. This is absolutely stunning! The oart when the tape peeled off the lines on her cab is relatable, I normally remove the tape before i let the painted area dry and then retape it lol I may take some notes for my customs honestly
Have you thought of using waterslide transfers for the lining? I don’t know how they might work on wood, but they could give you some pretty fine lines!
Holy cow is this an amazing model! Now there are 2 things on my mind. 1. I wonder what a side by side comparison of this custom and the 2022 Emily would look like (even if the custom is better). 2. How would a Bulleid Engine look in your style? Either way, amazing work Geoh! Emily looks stunning!
Your Custom Thomas Wooden Railway Emily is Gorgeous! You nailed it with that dark green you gave her. That smokebox looks like it was pulled straight from the show and resized to fit the TWR scale. You are an inspiration to us all Geoh.
As a Gunpla builder and amateur diorama maker, your videos have been such a HUGE help! I don't have much experience with wood and cardstock as I usually use plaplate but ever since I watched your Aqours club room video, I've been able to get better working with the materials and been wanting to do something similar with my Nozomi figures once I get the time to do so. Thank you for sharing your work and wishing you all the best!~
This is genuinely fantastic work. The frequent weird inaccuracies with the wood toy lines were usually part of why I’ve never really been a huge fan of them, and it makes me wish that a new one actually had that sense of polish and detail that both kids and older audiences can truly appreciate.
If I had a nickel for every time Geoh mentioned Wood Filler, I'd have two nickels, which isn't a lot, but its weird that it happened twice (Jokes aside, amazing custom as usual man!)
This is astounding! Emily always was a character that seemed to get the short end of the stick being translated in merchandise (along with Molly), and that sucks because she is one of my favorite characters. Seeing this first at Brampton and I was absolutely blown away how good she looks. From her green paint color, her shape of her boiler, and that gorgeous gold lining. Definitely your finest custom to date, Gio! Also, thanks for the little shoutout at the end. It was a great time meeting you North of the Border, along with so many others.
Have a gander at the 2019 and 2022 wooden versions of Emily. Letting her have a smaller face instead of forcing a Gordon-size one on her did wonders for her proportions. Also, FWIW I'd say Molly fared better than Emily in wooden stuff (at least originally, Emily has since gotten a better deal), even with the "outdated face" issue. Molly didn't end up with a Gordon and Henry stub of a funnel like old versions of Emily did.
You are such an inspiration! You have some many amazing custom building ideas that would never occur to me. No doubt you are one of the best wooden railway modelers in the community!
* A suggestion with why your paint may be acting up: * You need to be lighter with your spray painting I think. Do like, a quick flick across, stop, then repeat until the surface is fully covered, and it makes an even coat that doesn't clot or crack, because from what I can see in the video you moreso just hold it on the surface until it's covered. * Other than that, DUDE THIS IS AMAZING!! Finally an actually good Wooden Emily model, this is genuinely super incredible I wish I had your talent
Dude! Emily looks so good! You did such a good job with her! You should consider doing James soon; his running board NEEDS to be lengthened on his Wooden Railway model.
amazing work like always and it warms my heart knowing that my idea didn't go to waste and helped u make this beautiful model and also i really appreciate the shout out thank u geoh 😊
instead of mod podge spray, i’d recommend either “tamiya clear or flat clear spray,” or “mr hobby clear.” they are more expensive, but paint peeling and bubbling won’t happen.
Outstanding work! I was never a big fan of her official models, but you really crafted the perfect Emily. Phenomenal job! Can't wait to see which character you tackle next.
This is an absolutely gorgeous model! In my opinion, Emily usually tends to get the short end of the stick when it comes to merchandise (I see her Horby model in my nightmares XD) and you really did her justice here. Kudos to you!
This is so cool! It’s definitely a upgrade from any model of her. Her wooden railway models just look too, stumpy. You should try making a accurate Percy!
Outstanding work Geoh! By far your best, and my favorite custom so far! You’ve given me so much confidence and inspiration for my own Emily custom now. Can’t wait to see more from you in the future!
Man, it's incredible what magic yiu can do with such random materials. I really enjoyed watching this process through and absolutely adore the finish of the spray paint on both the body and especially the wheels. All of the little details you're able to add amazes me. Will definitely be messaging you about some more tips. Still so surreal that I got to hold this beautiful craftsmanship. Also I absolutely love the duck face on the table haha. I absolutely love the new face you gave her in the thumbnail specially. also ty for lil credit/shoutout at 26:07
You did a really nice job. Your videos inspired me to return to me original wooden railway Thomas and fix him up, I'll follow your videos as they seem to work pretty well. Stay radicola.
Omg I bought the exact same Nichijou manga! Your models are so impressive and inspiring too, they’re what makes me motivated to keep customize TWR items! Love the soundtracks as well!
This looks outstanding. You outdid yourself again. Good work! (Do Thomas or the Scottish twins next, since Thomas got his model broken for these models so much I think it’s his turn for an deluxe model for him)
This is amazing, great craftsmanship and use of a knock off, ever thought of doing James’ wooden railway model to make it look accurate with proper wheels and extensions on the running board, I feel like that would be great, again great job on this model it’s amazing
FANTASTIC MODEL!!! Instead of modge podge you may want to try rust-oleum Matte or ultra clear, I use that on some models and only had a problem when I sprayed when it was too cold XD No bubbles or cracking. Unless the coat under isn't cured...
I Like The Model, It Looks So Much Like The TV Show, It Reminds Me Of The Bachmann Version The Only Difference I Can Point Out, It Doesn’t Have Side Rods, At Least Its More Accurate Then The 2018 Wooden Railway Emily, I Also Like The Face Design, My Only Complaint It Should Be 1 More Bigger, Aside From The Minor Mistakes, This Custom Is A Masterpiece! This Should Be In An Art Museum, Someone Hire This Man, By The Way, Can You Do Thomas And Percy Next? You Would Do Thomas For Part 1, And Percy For Part 2, They Would Be An Additional Part Of The Wooden Railway Custom Series, It Would Look Cool, Also, This Part Was Funny 16:10
You might try putting the paint on in thinner coats, that should at least help the paint being thick in the valleys, that's what I find helps when painting with rust oleum
Great model! I was also disappointed by the wooden Emily as a kid, but I’m glad somebody decided to write those wrongs. Also, I noticed that you’re working on a Wooden Railway improved James, and I can’t wait to see that!
This is just a reminder of how off Emily’s merchandise is half the time. Her shape tends to get messed up and most of the time her faces aren’t super accurate.
as a man who has used that spray pant ill give you a tip. when you are spraying, start the pant flow before the pant hits the thing you are trying to pant and move in quick swipes side to side. doing this won't clump the pant.
I don't like this Emily. She's nowhere near as accurate as the 2018 Wood Emily model. The face placement is sooooo wrong! It needs to be on the rear like it is in the RWS books by the Rev. Roybert Wilson. There's a *reason* the official wooden Emily toys have a short funnel: *Chuggington destination clearance!* That's also why characters like Harvey and the Breakdown Train only lasted a year in the TWR range - they were too tall to fit under LC56803 Double-Decker Roundhouse (with Elevating Turntable). You did not aggressively sand down Emily until the model was paper thin in order to fit under any destination (including underneath the doors of the Roundhouse), nor did you make the model completely detachable using Mega Bloks bricks (it would be illegal to use Lego bricks since Lego has not owned the rights to Thomas & Friends since 1671). Lastly, she probably doesn't fit on the 33361 Brio Mechanical Turntable, which is pure lunacy.
Furthermore, the 2018 Thomas Wood Emily is also perfect because of its correct proportions and face structure, unlike your attempt. It is important to consider that these models need to be able to work properly and fit to scale because they are toys and not models. The models I use in my series are extremely accurate because they are Trainz models. It's clear your customs need work. As the Reverand Roybert said: "you can't do it!"
*Edit* If you've read this far, please note that this is a shitpost, and that Gio and I are actually good friends! :)
There is no excuse, this was a disservice to the Rev. Roybert Wilson, I should go to my shed and think about all the ways I can be really useful.
Why don’t you like this Emily?
If I had this my way, I would use the knock off wooden railway Emily and the 2021 book box and running board and the Trackmaster song face
And don’t forget to take along Emily tender
@@robbycastelli6486 Because it sucks and my opinion is the only one that matters
Such impressive work. I love how you take the knock off trains and turn them into something marvelous.
Took the words straight out of my mouth
@Enterprisingengine93 The fans do what Mattel absolutely refuses to.
I own the Wooden Railway Hank, but always found it odd how it both does & doesn't look like a PRR K4s. So my question is, could we get a 'Most accurate Wooden Hank' in the future?
It would be lovely
Bet, I'll have two ruby my k4 oc and Hank ruby will be for a reference
maybe sense geoh does like side characters like Emily i could defentely see hank in that category
@@BigSigmaGojo I might see if geoh wants to do a collaboration with me doing my irl k4 oc and him doing hank
I think Hank is overall fine (aside from the playability hit of no front magnet), and trying to mess with him too much would make him a space hog.
I just got to say your custom here is definitely an upgrade from the original toy.
I get that the whole style of wooden railway is to be simplified versions of the models, but Emily‘s model honestly looked more like a 2-2-2 bloomer than a gnr stirling single
Now imagine if HIT Entertainment or Mattel had introduced a character based on the LNWR Bloomer class 2-2-2?
@@Iron_Blood_Enjoyer1933
Awdry did have a bloomer on his layout, so that would be pretty neat
It's not an upgrade IMO. It _looks_ good (aside from the face placement), but it essentially minmaxed on looks - that funnel means it can't clear most bridges and tunnels. I do agree that the original official design was bad, though; Emily's proportions suffered *heavily* from the decision to give everybody Gordon-size faces (a decision that should have been reversed years sooner than it was).
I think you'd be better off coupling a 2004-2017 tender (where the coal rails are actually part of the jigsaw instead of just painted on) to a 2019 body (which has way better proportions than the older Emily version). Or if you're going to be super fussed about wheel arrangement accuracy, get the 2022 Emily and call it a day.
@@ZeldaTheSwordsmanever heard of an opinion? Also you’re literally saying effectively the same thing in every reply section so please stop.
that might be a fun custom project to make that out of an Emily! Thanks for the comment
Dude Emily looks so gorgeous! I will admit Emily definitely has a troubling history with merchandise and while I don't mind some of the merchandise as it's meant to be simplistic this just goes to show that you can make little toys for kids look accurate. It also shows you can take something hideous and make it beautiful too! One of your best customs yet and I hope you make her coaches to go with her. Keep up the good work Geoh!
No, the 2019 Emily shows that you can make little toys for kids look accurate. The 2022 Emily shows that you can make toys for little kids look accurate.
This custom minmaxed on looks at the expense of playability, and thus is a very poor toy for kids. It's a good _display_ piece (aside from the face placement), but that tall funnel means you can forget getting it through most tunnels and under most bridges.
@@ZeldaTheSwordsman Whoa whoa whoa whoa whoa whoa! Who are you to come here and start judging. The 2019 Emily isn't even good. And even though the 2022 version is way better it still leaves a lot to be desired.
Wow, Emily looks fantastic, loved watching your process. The Dremel is one of my favorite tools ever, i do most of my customizing with one. Reguarding the paint, I believe your main issue is you are painting a little too close, and too heavy of a coat. It's better to spray an arms length or 6-8 inches away, and do multiple light coats. Doing too close and too heavy, with a mix of cold air will make the paint crack or orange peel. Same goes for the clearcoat, and last but not least, make sure the cans are evenly shakened, and are at room temperature, hope this helps! Fantastic work as always.
Thanks for the tips and comment! Appreciate it!!
“Then I primed it and then I gave it a light sand” has the same energy as “crazy? I was crazy once”
XD that was the idea! Glad you caught it. Thanks for the comment
Wow! That custom Emily is amazing! And I love the mix of UK and US at the end! I'd love it if you did this for all future endings of videos of your custom Wooden Railway models!
Oh, and word of advice, the Rustoleum spray paint takes around 5-7 days to truly dry from my experience with it, so I’d recommend leaving that paint to dry for a week at most and 5 days at least.
Since Henry Was Used In this Can We Please Get an Accurate Henry custom Video PPPPLLLLEEEEAAAASSSSEEEE!!!!
9:42 Hope we can see more of Emily's 6 wheel tender in future, it looks a bit more realistic and accurate in my view. Great video mate, best wishes from the UK as always. 😊
@geohtoy @GeohToy
She’s a fabulous custom! Next custom you make, try a Small Scale Percy to make him accurate.
I think we can all agree that wooden railway never made a perfect Emily until now. Geoh this is such an amazing representation of Emily and it’s MILES better than the actual product well done as always!
What about the 2023 version🤔
@@Steamtheamaricanengine it’s good but it it’s not perfect but it was close.
@@Splendid_Studios i know but hey atleast it looked good i say looked bc this took the top spot now that i thibk about it
Agreed
This might be your best custom. In my opinion it looks so good. It’s mind-boggling. This is definitely the best Emily custom I’ve seen.
Emily looks so amazing, This is what The Wooden Railway Emily should’ve looked like and you should make an accurate Wooden Railway Edward custom next
I was browsing twitter, and I GASPED when i saw this. This is absolutely stunning!
The oart when the tape peeled off the lines on her cab is relatable, I normally remove the tape before i let the painted area dry and then retape it lol
I may take some notes for my customs honestly
Hi :3
@@TessfromKellstorpe eyyyyy!! Hi!
@@allenginesgofan101iambeing4 hello!
I have no words, this is the best custom I’ve seen, and I’m sure a lot of other people would say the same
Have you thought of using waterslide transfers for the lining? I don’t know how they might work on wood, but they could give you some pretty fine lines!
Thanks for the comment! I have considered it, maybe in future.
Holy cow is this an amazing model! Now there are 2 things on my mind. 1. I wonder what a side by side comparison of this custom and the 2022 Emily would look like (even if the custom is better). 2. How would a Bulleid Engine look in your style? Either way, amazing work Geoh! Emily looks stunning!
Your Custom Thomas Wooden Railway Emily is Gorgeous!
You nailed it with that dark green you gave her. That smokebox looks like it was pulled straight from the show and resized to fit the TWR scale.
You are an inspiration to us all Geoh.
I really love the fact that you used tape for the pinstriping!!!! I wish I could do that too!!!!
Now, she just needs her number 12.
She’s so gorgeous! Your best model yet!
As a Gunpla builder and amateur diorama maker, your videos have been such a HUGE help! I don't have much experience with wood and cardstock as I usually use plaplate but ever since I watched your Aqours club room video, I've been able to get better working with the materials and been wanting to do something similar with my Nozomi figures once I get the time to do so. Thank you for sharing your work and wishing you all the best!~
Hey so happy and honored to hear it inspired you! I'd love to see what you end up making for Nozomi! You might need Eli to go with her though ;D
Now This Is A Great Model Now This Is How Emily's Prop Model Looks.🤩
This is genuinely fantastic work. The frequent weird inaccuracies with the wood toy lines were usually part of why I’ve never really been a huge fan of them, and it makes me wish that a new one actually had that sense of polish and detail that both kids and older audiences can truly appreciate.
Ever seen the 2022 Emily?
If I had a nickel for every time Geoh mentioned Wood Filler, I'd have two nickels, which isn't a lot, but its weird that it happened twice
(Jokes aside, amazing custom as usual man!)
its been more than 2 id be covered in nickels
@@robohuntero1828Exactly man. I'm cashing my check lol
This is astounding!
Emily always was a character that seemed to get the short end of the stick being translated in merchandise (along with Molly), and that sucks because she is one of my favorite characters. Seeing this first at Brampton and I was absolutely blown away how good she looks. From her green paint color, her shape of her boiler, and that gorgeous gold lining. Definitely your finest custom to date, Gio!
Also, thanks for the little shoutout at the end. It was a great time meeting you North of the Border, along with so many others.
Have a gander at the 2019 and 2022 wooden versions of Emily. Letting her have a smaller face instead of forcing a Gordon-size one on her did wonders for her proportions.
Also, FWIW I'd say Molly fared better than Emily in wooden stuff (at least originally, Emily has since gotten a better deal), even with the "outdated face" issue. Molly didn't end up with a Gordon and Henry stub of a funnel like old versions of Emily did.
@@ZeldaTheSwordsman Lol no.
22:59 I love this shot
This man really just made his own toy, and it turned out awesome
Tbh this is the best twr custom you’ve done so far in my opinion.
I personally think it's a terrible custom unless all you want to use it for is display.
@@ZeldaTheSwordsman wheres your at then-?
This custom Emily model looks stunning! Brilliant job on this!
The return of everybody's favourite, *Wood Filler!* You love to see it!
I always love seeing the process come along, it's always so satisfying.
You are such an inspiration! You have some many amazing custom building ideas that would never occur to me. No doubt you are one of the best wooden railway modelers in the community!
I’m hella impressed by how you managed to make an accurate version of Emily for Wooden Railway.
* A suggestion with why your paint may be acting up:
* You need to be lighter with your spray painting I think. Do like, a quick flick across, stop, then repeat until the surface is fully covered, and it makes an even coat that doesn't clot or crack, because from what I can see in the video you moreso just hold it on the surface until it's covered.
* Other than that, DUDE THIS IS AMAZING!! Finally an actually good Wooden Emily model, this is genuinely super incredible I wish I had your talent
Thank you so much for the tips! Really appreciate it
Dude! Emily looks so good! You did such a good job with her!
You should consider doing James soon; his running board NEEDS to be lengthened on his Wooden Railway model.
Outstanding Achievement you really captured the Emily 😃👍
amazing work like always and it warms my heart knowing that my idea didn't go to waste and helped u make this beautiful model and also i really appreciate the shout out thank u geoh 😊
instead of mod podge spray, i’d recommend either “tamiya clear or flat clear spray,” or “mr hobby clear.” they are more expensive, but paint peeling and bubbling won’t happen.
This model looks amazing well done Geoh I like it keep up the good work 22:34
This model you made is just so beautiful I love it. You made Emily so accurate 💚
Outstanding work! I was never a big fan of her official models, but you really crafted the perfect Emily. Phenomenal job! Can't wait to see which character you tackle next.
My first of your videos was building CITY OF TRURO and ngl watching you build these customs is so much fun!
Can't wait for the next one
Wow. WOW! This is more splendid than James! Once again, awesome model! It’s so perfect! Keep up the good work! (Without stressing yourself out)👍👍👍
This is an absolutely gorgeous model! In my opinion, Emily usually tends to get the short end of the stick when it comes to merchandise (I see her Horby model in my nightmares XD) and you really did her justice here. Kudos to you!
Such an Amazing Work right There, Emily looks Incredible!, Great Job.👍
Wow! Emily looks great! 👍
Very nice custom twr Emily 👍
Through the whole video I focussed on your process on Emily and was waiting for something bad to happen
and the wheels were that something. Lmao
Wow! Beautiful job indeed!
I recently discovered your channel, and I'm glad I did, these models are very hard to make and I like wood
Excellent Emily model!
Great looking custom
Watched it all. Well done. I'm looking forward to see who you would be customising next.
This is so cool! It’s definitely a upgrade from any model of her. Her wooden railway models just look too, stumpy. You should try making a accurate Percy!
Make sure emily's 6 wheel tender goes around tight cures
Thanks for the tip! I'm using a standard Thomas chassis with 6 wheels so should make it.
Outstanding work Geoh! By far your best, and my favorite custom so far! You’ve given me so much confidence and inspiration for my own Emily custom now. Can’t wait to see more from you in the future!
You're a magician, this looks wonderful!!
I thought the next one would be Stepney but I guess not, no matter, this is literally so AWESOME
The perfect Emily doesn’t exist-
The perfect Emily :
These were my childhood toy trains. I like how u made it accurate
Man, it's incredible what magic yiu can do with such random materials. I really enjoyed watching this process through and absolutely adore the finish of the spray paint on both the body and especially the wheels. All of the little details you're able to add amazes me. Will definitely be messaging you about some more tips. Still so surreal that I got to hold this beautiful craftsmanship. Also I absolutely love the duck face on the table haha.
I absolutely love the new face you gave her in the thumbnail specially.
also ty for lil credit/shoutout at 26:07
great emily custom geoh! absolutelly spot on.
A note to spray paint: don’t spray so heavily in one spray. Sorta “pulse” it while going back and forth for a light coat
This man is about to make every engine look SPECTACULAR at this rate! Keep it up! ❤️
Nice job on your custom model of Emily, Geoh!
This is wonderful, your wooden Emily model looks awesome!!
See now THIS is the type of train modelling I want to get into! I do lego trains, but this is so cool!
I love Lego trains too!
I found out you’ve had 5 knock off trains called Molly, Gordon, Oliver, Emily, and Henry, right?
Yes!
this is probably the best wooden railway custom I've ever seen
You did a really nice job. Your videos inspired me to return to me original wooden railway Thomas and fix him up, I'll follow your videos as they seem to work pretty well. Stay radicola.
Thanks for your comment! Please share yours once they're complete, I'd love to see them! good luck!
Well done, mate👍👍 Emily the Stirling Single is a very beautiful engine
I'd say this is prolly my favorite one you've done so far
Omg I bought the exact same Nichijou manga! Your models are so impressive and inspiring too, they’re what makes me motivated to keep customize TWR items! Love the soundtracks as well!
You have excellent taste!
That Thomas Landbus took me completely by surprise LOL
That was a very fun process and the final result really does look accurate.
Well done, Geoh! Emily looks great! 😃👍🤩🤩🤩
You should make a most accurate wooden Whiff
22:19 You just took that engine to Your wooden railway works And rebuilded emily! SO COOL!
This looks outstanding. You outdid yourself again. Good work!
(Do Thomas or the Scottish twins next, since Thomas got his model broken for these models so much I think it’s his turn for an deluxe model for him)
If you want to have little to no chances of the paint cracking when applying a clear coat, I'd recommend using Tamiya Flat Clear/Gloss
This is amazing, great craftsmanship and use of a knock off, ever thought of doing James’ wooden railway model to make it look accurate with proper wheels and extensions on the running board, I feel like that would be great, again great job on this model it’s amazing
Good job man! Can't wait for the next accurate wooden railway model video
FANTASTIC MODEL!!!
Instead of modge podge you may want to try rust-oleum Matte or ultra clear, I use that on some models and only had a problem when I sprayed when it was too cold XD No bubbles or cracking. Unless the coat under isn't cured...
I Like The Model, It Looks So Much Like The TV Show, It Reminds Me Of The Bachmann Version The Only Difference I Can Point Out, It Doesn’t Have Side Rods, At Least Its More Accurate Then The 2018 Wooden Railway Emily, I Also Like The Face Design, My Only Complaint It Should Be 1 More Bigger, Aside From The Minor Mistakes, This Custom Is A Masterpiece! This Should Be In An Art Museum, Someone Hire This Man, By The Way, Can You Do Thomas And Percy Next? You Would Do Thomas For Part 1, And Percy For Part 2, They Would Be An Additional Part Of The Wooden Railway Custom Series, It Would Look Cool, Also, This Part Was Funny 16:10
You made a new one and went out of the park with this one.
Dude you need to do Edward, I don’t wanna look at a “K2” out there looking like Thomas with a tender
never stop what your doing i love evrying you do
You might try putting the paint on in thinner coats, that should at least help the paint being thick in the valleys, that's what I find helps when painting with rust oleum
Appreciate the tip! Thanks
You know, I have to commend you for getting a sponsor that’s actually relevant to the video; for once, I actually may be convinced to use them!
Fantastic work on this custom! The detail and accuracy you were able to add on this engine is really cool!
Great model! I was also disappointed by the wooden Emily as a kid, but I’m glad somebody decided to write those wrongs.
Also, I noticed that you’re working on a Wooden Railway improved James, and I can’t wait to see that!
Try using paint to hold together 2 pieces of wood instead of using glue
One of the best customs that I’ve seen a a while
This is just a reminder of how off Emily’s merchandise is half the time. Her shape tends to get messed up and most of the time her faces aren’t super accurate.
as a man who has used that spray pant ill give you a tip. when you are spraying, start the pant flow before the pant hits the thing you are trying to pant and move in quick swipes side to side. doing this won't clump the pant.
Hearing Love Live and RR Slugger next to each other in the soundtrack is surreal to me, the only other person on Earth who watches both.
They’re really isn’t no *one quite like Emily friendly good all reliable Emily*
You make the best train models.and you are my second best train youtuber.😊😊😊❤❤❤🎉🎉🎉
23:08 this comparison bro